Thanks
but I would not like to go and build a new RTP/RTSP etc stack on my own... I
an sure there are readymade stacks like these on the net. I have heard of
live555 and others.
Any ideas ?
Albert


On 4/1/08, António Silva <[EMAIL PROTECTED]> wrote:
>
> The most helpful resources are RFCs from IETF. I can point you out the
> most important rfc's about the subject you pretend.
>
>      RTP: *rfc*1889
>      RTSP: *rfc*2326
>      SDP: *rfc*2327 (this is useful for rtsp or multicast streams)
>      RTCP: *rfc*3550
>
> Then, depending on which standard are you working at (MPEG-4 SP, AVC) you
> have to verify the corresponding RFC to see how to packetizes the encoded
> frame.
>
> Regards,
>
> A.Silva
>
> On Mon, Mar 31, 2008 at 11:03 PM, Albert Burbea <[EMAIL PROTECTED]>
> wrote:
>
> > hi all
> > can somebody explain a little about video streaming in general, or give
> > us some pointers?
> > Especially on rtp, rtsp, and different kind of media
> > thanks all
> >
> >
> >
> >   On 3/31/08, António Silva <[EMAIL PROTECTED]> wrote:
> >
> > >   Hi all,
> > >
> > > I am trying to perform a test which consists in perform an MPEG-4
> > > Encoder & Streaming application using the board DM355.
> > >
> > > I already worked with an H.264 Encoder & Streaming application, and
> > > with H.264 we have sps and pps periodically transmited which allows a 
> > > client
> > > to receive the stream even is the sender is not at the beggining of the
> > > transmission.
> > >
> > > In MPEG-4 we only have the MPEG-4 header (I think is VOL header) at
> > > the beggining an then we just have VOP headers. The receiver cannot 
> > > receive
> > > the stream if he dows not get the VOL header.
> > > My question is, how can we do this using the MPEG-4 Encoder at DM355?
> > > Does anybody knows the size of the VOL header generated by the encoder at
> > > DM355??
> > >
> > > Thanks in advance,
> > >
> > > A.Silva
> > >
> > >
> > > _______________________________________________
> > > Davinci-linux-open-source mailing list
> > > Davinci-linux-open-source@linux.davincidsp.com
> > > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
> > >
> > >
> >
> >
> > --
> > Albert Burbea
> > Harishonim 8
> > Ramat Gan 52502, Israel
> > Tel/Fax + 972-3-7526016
> > Mobile: +972-52-3541842
>
>
>


-- 
Albert Burbea
Harishonim 8
Ramat Gan 52502, Israel
Tel/Fax + 972-3-7526016
Mobile: +972-52-3541842
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to