hi I am trying to boot TI TMS320DM6446 DVEVM from the NAND flash. followed the steps from TI SPRAAA0(http://focus.ti.com/lit/an/spraaa0/spraaa0.pdf) followed upto step 4 in section 2.4. The next step in the document is to format the NAND flash device using ftl_format command. If i do so the bootloader in the NAND flash will be erased.(there is only one partition is present in NAND flash i.e. mtd0)
My question is can i load the bootloader(ubl_nand and u-boot-567-nand) into NAND flash using nandwrite command, if yes in what offset address i have to load it. Also can you please give me the offset address, where kernel and filesystem are to be loaded. Regards Rajesh G The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it. Contact your Administrator for further information. _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
