You can find them in section A.4.1. Basically you need to make sure you have the following added to your bootargs
video=davincifb:vid0=720x576x16,2500K:vid1=720x576x16,2500K:osd0=720x576x16,2025K davinci_enc_mngr.ch0_output=COMPOSITE davinci_enc_mngr.ch0_mode=$(videostd) Sincerely, Chase Maupin Software Applications Catalog DSP Products e-mail: [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]> phone: (281) 274-3285 ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Panchy Rivas Sent: Wednesday, August 06, 2008 1:12 PM To: davinci-linux-open-source@linux.davincidsp.com Subject: receiving an error when I run the interface demo on the DM6446 Where in the Getting Started Guide Here is my printenv DaVinci EVM # printenv bootdelay=3 baudrate=115200 bootfile="uImage" bootargs_hdd=console=ttyS0,115200n8 noinitrd ip=dhcp root=/dev/hda1 mem=120M static_ip=192.168.1.41:192.168.1.40:192.168.1.1:255.255.255.0:::off serverip=192.168.1.40 nfspath=/home/frivas/workdir/filesys ipaddr=dhcp myip=dhcp bootargs_nfs=console=ttyS0,115200n8 noinitrd rw ip=dhcp root=/dev/nfs nfsroot=19 2.168.1.40:/home/frivas/workdir/filesys,nolock mem=120M bootargs=console=ttyS0,115200n8 noinitrd rw ip=dhcp root=/dev/nfs nfsroot=192.16 8.1.40:/home/frivas/workdir/filesys,nolock mem=120M bootcmd_tftp=dhcp;bootm bootcmd=dhcp;bootm stdin=serial stdout=serial stderr=serial ethaddr=00:0e:99:02:58:f9 videostd=ntsc Environment size: 664/16380 bytes Thank you, Thank you, Panchy Rivas Senior Engineer Custom Video Design Inc. 11626 34th Place Beltsville, MD 20705-2703 Tues & Thurs (301) 595-4369 Rest of week (202) 966-8735 Cell: (202) 253-8285 Fax: (301) 595-1020 Email: [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]>
_______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source