Philip Balister wrote:
Kevin Hilman wrote:
Mark Lokowich <[EMAIL PROTECTED]> writes:

Revert double IIR test in 8250 driver


Can you give a more detailed description of what the problem is that
is being fixed?

Without this patch, serial console behavior is strange. You type and nothing is echoed and you hit return and things happen. It feels like two processes are grabbing input.

I think someone posted a more technical description, but I couldn't find it quickly.

Philip

   This section of the driver is a test for faulty 16650
   implementations that require a backup timer.  The patch reverts the
   change that compares two states (instead of one, as in 2.6.25.2) of
   the IIR to determine if the workaround is required.  The DaVinci
   UART does not need the backup timer, but the double conditional
   passed, enabling the timer and causing interrupt handling errors on
   the console and other UARTS.

   Mark


This is in the generic 8250 driver so will affect all platforms.  For
this to be accepted, it should be discussed on linux-serial[1]

Kevin

Acked-by: Jaswinder Singh <[EMAIL PROTECTED]>
---
--- linux-2.6/drivers/serial/8250.c
+++ linux-2.6-vanilla/drivers/serial/8250.c
@@ -1867,7 +1867,6 @@
    }

    if (is_real_interrupt(up->port.irq)) {
-        unsigned char iir1;
        /*
         * Test for UARTs that do not reassert THRE when the
         * transmitter is idle and the interrupt has already
@@ -1881,7 +1880,7 @@
        wait_for_xmitr(up, UART_LSR_THRE);
        serial_out_sync(up, UART_IER, UART_IER_THRI);
        udelay(1); /* allow THRE to set */
-        iir1 = serial_in(up, UART_IIR);
+        serial_in(up, UART_IIR);
        serial_out(up, UART_IER, 0);
        serial_out_sync(up, UART_IER, UART_IER_THRI);
        udelay(1); /* allow a working UART time to re-assert THRE */
@@ -1894,7 +1893,7 @@
         * If the interrupt is not reasserted, setup a timer to
         * kick the UART on a regular basis.
         */
-        if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
+        if (iir & UART_IIR_NO_INT) {
            pr_debug("ttyS%d - using backup timer\n", port->line);
            up->timer.function = serial8250_backup_timeout;
            up->timer.data = (unsigned long)up;


_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source


[1] From MAINTAINERS:

8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
L:    [EMAIL PROTECTED]
W:    http://serial.sourceforge.net
S:    Orphan
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to