Hi I can't find these files(UART_BOOT.tar.gz,mmsnandloader.tar.gz and u-boot-1.2.0-davinci+nand+dirk.patch) on the site http://www.mm-sol.com/itonchev/
Did anyone download them? Can you send them to me? Waiting for your help.I need these files for my task. best regards mafaqing 2008-08-12 ----------------- Original Message --------------- From: Ivan Tonchev To: Dirk Behme Sent: 2007-08-31 10:56:25 Subject: Re: DVFlasher/TI UBL replacement, was: BOOTME Dirk Behme wrote: > Dirk Behme wrote: > > Ivans mail: Ivan Tonchev wrote: > > > > Hi Dirk, > > > > Thanks for posting your sources. Unfortunately I am very pressed on time > > and I can't look at them now. > > > > Very happy to hear about yours and Sergey's work! > > > > What I have is a somewhat complete flashing toolchain with decompression > > and bad blocks support. > > > > Of course, my code requires cleanup, but since you guys are working on > > this too and I will be on vacation from tomorrow, I'm attaching it as it > > is now (see [3] and [4]). > > > > It consists of 5 components: > > 1. BOOTME > > 2. BOOTMMS > > 3. UCL compression library > > 4. mmsuartloader > > 5. mmsnandloader > > BOOTME and BOOTMMS are the host tools which basically replace > > DVFlasher. BOOTME serves RBL download requests and BOOTMMS serves UBL > > download requests. They are both written in C# as I started with > > Daniel's tool. > > > > UCL is a compression library with very simple decompression algorithms > > and compression ratios comparable to gzip (see [1]). > > > > mmsuartloader and mmsnandloader are the UART and NAND UBL respectively. > > They replace TI UBL. mmsuartloader downloads UCL compressed uImages over > > UART. mmsnandloader boots uImages stored in NAND flash. It uses RBL > > compatible ECC scheme (which can be found in [2]). > > > > Unfortunately all these tools don't work on EVM as they initialize DDR > > controller with incompatible settings. But it should be pretty > > straightforward to get them working! > > > > I will update the wiki with the RBL bad blocks/ECC information from > > Daniel (see [5]). > > I prefer [6] and will move the info from [5] to [6] ;) > > > > > Happy hacking, > > Ivan > > > > [1] > > http://www.oberhumer.com/opensource/ucl/#abstract > > > > [2] > > attached u-boot-1.2.0-davinci+nand+dirk.patch > > > > [3] > > attached UART_BOOT.tar.gz > > > > [4] > > attached mmsnandloader.tar.gz > > > > [5] > > http://www.elinux.org/DaVinci_RBL_1.0 > > [6] http://wiki.davincidsp.com/index.php?title=RBL_UBL_and_host_program > > ... > > > UART_BOOT.tar.gz > > This is 610k. Anybody with some web space we can put it on? Seems that > the mailing list doesn't like it ;) > > > mmsnandloader.tar.gz > > Please find the mmsnandloader.tar.gz from Ivan in attachment. > > Best regards > > Dirk > > OK, guys, I put the files here: http://www.mm-sol.com/itonchev/ Happy hacking, Ivan _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source