Hi Deepak,
You need to apply boot loader patch to kernel which will provide the MACHINE ID to kernel. Thanks & regards Inderpal -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Deepak Mundra Sent: Monday, September 08, 2008 4:23 PM To: davinci-linux-open-source@linux.davincidsp.com Subject: problem booting with kernel 2.6.23 and 2.6.26 on dm644x Hi i am trying to compile 2.6.23 and 2.6.26(presently using 2.6.10 , which is working fine) with first one im getting stuck after Uncompressing kernal image Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux....................................................................... .................................. .......... done, booting the kernel. and with 26 kernel im getting following error Starting kernel ... Uncompressing Linux....................................................................... ........................ done, boo ting the kernel. Error: unrecognized/unsupported machine ID (r1 = 0x00000356). Available machine support: ID (hex) NAME 00000385 DaVinci EVM Please check your kernel config and/or bootloader. please help me commands which i used make ARCH=arm CROSS_COMPILE=arm_v5t_le- davinci_evm_dm644x_defconfig make ARCH=arm CROSS_COMPILE=arm_v5t_le- uImage Thanks
_______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source