Try adding the gateway ip too to your bootargs 'ip' parameter. See this- http://www.mail-archive.com/[EMAIL PROTECTED] om/msg07462.html Ip has to be given as ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoco nf> You can see whether the requests are coming to your host in /var/log/messages - Hope this helps. Cheers, Deepak
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pradeep L Sent: Friday, November 21, 2008 9:21 AM To: Rajashekhara, Sudhakar Cc: [email protected] Subject: Re: DM6467 EVM bootup problem Hi, I set static ip address and removed ip=dhcp from bootargs. Below is the list of environment values that i have set here. bootdelay=3 baudrate=115200 setenv=bootcmd nboot 80700000 0 a0000 bootfile=/tftpboot/uImage rootpsth=/home/pradeep_6467/workdir/filesys autoload=yes ip=192.168.1.50 <http://192.168.1.50/> serverip=192.168.1.111 <http://192.168.1.111/> bootcmd=nboot 80700000 0 a0000 stdin=serial stdout=serial stderr=serial ethaddr=00:0e:99:02:b3:47 ipaddr=192.168.1.2 <http://192.168.1.2/> serverip=192.168.1.100 <http://192.168.1.100/> netmask=255.255.255.0 <http://255.255.255.0/> rootpath=/home/pradeep_6467/workdir/filesys bootargs=console=ttyS0,115200n8 noinitrd rw ip=192.168.1.2:(serverip):255.255.255.0::off root=/dev/nfs nfsroot=192.168.1.100:/home/<user account>/workdir/filesys, nolock mem=120M nfshost=192.168.1.100 <http://192.168.1.100/> Environment size: 593/131068 bytes And then I tried to boot the device. I got the following messages: Loading from NAND 128MiB 3,3V 8-bit, offset 0xa0000 Image Name: Linux-2.6.10_mvl401-davinci_evm Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1390892 Bytes = 1.3 MB Load Address: 80008000 Entry Point: 80008000 Is this what I am to expect? Thanks and regards, Pradeep. On Thu, Nov 20, 2008 at 6:28 PM, Rajashekhara, Sudhakar <[EMAIL PROTECTED]> wrote: Pradeep, This can happen if you are using ip=dhcp in your bootargs but there is no DHCP server. If you are using static IP address, remove ip=dhcp from your bootargs. You can also disable DHCP support from menuconfig under Networking Options if you are using static IP address. Regards, Sudhakar ________________________________ From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of Pradeep L [EMAIL PROTECTED] Sent: Thursday, November 20, 2008 8:25 AM To: [email protected] Subject: DM6467 EVM bootup problem Hi All, I am working on DM6467 EVM. The problem is when i bootup the board I get the following message "Sending DHCP requests...timed out! IP-config: Retrying forever (NFS root)....". I suspect it is something to do with the u-boot configuration? (I am not sure though). Can anyone please help me out on this? Thanks in advance, Pradeep, DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect. ----------------------------------------------------------------------------------------------------------------------- _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
