Hi every one,
I am having a problem that I can not login the target board as root user, it
always responds "login incorrect". I tried to open file /etc/passwd and
/etc/shadow and sure that the root user has no password.
I am using boot mode via TFTP using NFS file system and I also upgraded the
target to the newest version 5.0.0.0 and file system also. You can see on
the console:
192.168.1.105 login: Chip initialization passed!
TI UBL Version: 1.30
Booting Catalog Boot Loader
BootMode = NAND
Starting NAND Copy...
Valid MagicNum found.
DONE
Jumping to entry point at 0x81080000.
U-Boot 1.2.0 (Feb 2 2008 - 23:52:10)
DRAM: 128 MB
NAND: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3 (Micron NAND 1GiB
3,3V 8-bit)
Bad block table found at page 524224, version 0x01
Bad block table found at page 524160, version 0x01
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3 (Micron NAND 1GiB 3,3V
8-bit)
Bad block table found at page 524224, version 0x01
Bad block table found at page 524160, version 0x01
2048 MiB
In: serial
Out: serial
Err: serial
ARM Clock :- 216MHz
DDR Clock :- 171MHz
Hit any key to stop autoboot: 0
Loading from NAND 1GiB 3,3V 8-bit, offset 0x400000
Image Name: Linux-2.6.18_pro500-davinci_evm-
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1970200 Bytes = 1.9 MB
Load Address: 80008000
Entry Point: 80008000
## Booting image at 80700000 ...
Image Name: Linux-2.6.18_pro500-davinci_evm-
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1970200 Bytes = 1.9 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
OK
Starting kernel ...
Uncompressing
Linux...................................................................................................................................
done,.
Linux version 2.6.18_pro500-davinci_evm-arm_v5t_le ([EMAIL PROTECTED])
(gcc version 4.2.0 20070126 (prerelease) (MontaVista 4.2.0-3.0.0.0702771
2007-03-108
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: DaVinci DM355 EVM
Memory policy: ECC disabled, Data cache writeback
DaVinci DM0350 variant 0x0
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
Built 1 zonelists. Total pages: 29696
Kernel command line: console=ttyS0,115200n8 noinitrd ip=dhcp root=/dev/nfs
rw nfsroot=192.168.1.103:/home/ngohaibac/workdir/filesys, nolock mem=116M
PID hash table entries: 512 (order: 9, 2048 bytes)
Clock event device timer0_0 configured with caps set: 03
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 116MB = 116MB total
Memory: 113280KB available (3397K code, 679K data, 172K init)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
DaVinci: 104 gpio irqs
ch0 default output "COMPOSITE", mode "NTSC"
VPBE Encoder Initialized
LogicPD encoder initialized
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.1 (2006/08/19) Phillip Lougher
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
yaffs Oct 9 2008 05:55:16 Installing.
SGI XFS with no debug enabled
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
LTT : ltt-facilities init
LTT : ltt-facility-core init in kernel
davincifb davincifb.0: dm_osd0_fb: [EMAIL PROTECTED],0 with framebuffer size
1350KB
davincifb davincifb.0: dm_vid0_fb: [EMAIL PROTECTED],0 with framebuffer size
675KB
davincifb davincifb.0: dm_osd1_fb: [EMAIL PROTECTED],0 with framebuffer size
1350KB
davincifb davincifb.0: dm_vid1_fb: [EMAIL PROTECTED],0 with framebuffer size
675KB
DAVINCI-WDT: DaVinci Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO map 0x1c20000 mem 0xfec20000 (irq = 40) is a
16550A
serial8250.0: ttyS1 at MMIO map 0x1c20400 mem 0xfec20400 (irq = 41) is a
16550A
serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1e06000
IRQ14): -28
RAMDISK driver initialized: 1 RAM disks of 32768K size 1024 blocksize
dm9000 Ethernet Driver
eth0: dm9000 at c785e000,c7860002 IRQ 45 MAC: 00:0e:99:02:c4:06
netconsole: not configured, aborting
Linux video capture interface: v2.00
vpfe vpfe.1: DaVinci v4l2 capture driver V1.0 loaded
Trying to register davinci display video device.
layer=c08eb800,layer->video_dev=c08eb960
Trying to register davinci display video device.
layer=c08eb600,layer->video_dev=c08eb760
davinci_init:DaVinci V4L2 Display Driver V1.0 loaded
ipipe major#: 254, minor# 0
ipipe driver registered
af major#: 253, minor# 0
aew major#: 252, minor# 0
i2c /dev entries driver
nand_davinci nand_davinci.0: Using 4-bit hardware ECC
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3 (Unknown NAND 1GiB 3,3V
8-bit)
2 NAND chips detected
nand_davinci_4bit_compare_ecc Too many errors to be corrected!
nand_davinci_4bit_compare_ecc Too many errors to be corrected!
nand_davinci_4bit_compare_ecc Too many errors to be corrected!
nand_davinci_4bit_compare_ecc Too many errors to be corrected!
nand_bbt: ECC error while reading bad block table
nand_davinci_4bit_compare_ecc Too many errors to be corrected!
nand_davinci_4bit_compare_ecc Too many errors to be corrected!
nand_davinci_4bit_compare_ecc Too many errors to be corrected!
nand_davinci_4bit_compare_ecc Too many errors to be corrected!
nand_bbt: ECC error while reading bad block table
Creating 5 MTD partitions on "nand_davinci.0":
0x00000000-0x003c0000 : "bootloader"
0x003c0000-0x00400000 : "params"
0x00400000-0x00800000 : "kernel"
0x00800000-0x20800000 : "filesystem1"
0x20800000-0x80000000 : "filesystem2"
nand_davinci nand_davinci.0: hardware revision: 2.3
dm_spi.0: davinci SPI Controller driver at 0xc7864000 (irq = 42) use_dma=0
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
musb_hdrc: version 6.0, cppi-dma, host, debug=0
musb_hdrc musb_hdrc: No DMA interrupt line
musb_hdrc: USB Host mode controller at c7866000 using DMA, IRQ 12
musb_hdrc musb_hdrc: MUSB HDRC host driver
musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
mice: PS/2 mouse device common for all mice
davinci-mmc davinci-mmc.0: Supporting 4-bit mode
davinci-mmc davinci-mmc.0: Using DMA mode
davinci-mmc davinci-mmc.1: Supporting 4-bit mode
davinci-mmc davinci-mmc.1: Using DMA mode
Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22
13:55:50 2006 UTC).
ASoC version 0.13.1
AIC3X Audio Codec 0.1
asoc: aic3x <-> davinci-i2s mapping ok
ALSA device list:
#0: DaVinci DM355 EVM (aic3x)
IPv4 over IPv4 tunneling driver
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Time: timer0_1 clocksource has been installed.
Clock event device timer0_0 configured with caps set: 08
Switched to high resolution mode on CPU 0
eth0: link down
Sending DHCP requests .<6>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
., OK
IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.105
IP-Config: Complete:
device=eth0, addr=192.168.1.105, mask=255.255.255.0, gw=192.168.1.1,
host=192.168.1.105, domain=, nis-domain=(none),
bootserver=192.168.1.1, rootserver=192.168.1.103, rootpath=
Looking up port of RPC 100003/2 on 192.168.1.103
Looking up port of RPC 100005/1 on 192.168.1.103
VFS: Mounted root (nfs filesystem).
Freeing init memory: 172K
INIT: Entering runlevel: 3
Starting system log daemon: syslogd klogd.
Starting NFS common utilities: statd.
Starting internet superserver: inetd.
Starting OpenBSD Secure Shell server: sshd/var/empty/sshd must be owned by
root and not group or world-writable.
failed (255: ).
MontaVista(R) Linux(R) Professional Edition 5.0.0 (0801921)
192.168.1.105 login: root
Login incorrect
192.168.1.105 login:
And the following lines are the environment variables:
baudrate=115200
nfspath=home/ngohaibac/workdir/fielsys
rootpath=/home/ngohaibac/workdir/filesys
dns1=220.68.64.1
bootdelay=5
gateway=192.168.1.1
filesize=1e1058
fileaddr=80700000
gatewayip=192.168.1.1
netmask=255.255.255.0
ipaddr=192.168.1.105
bootcm=dhcp;bootm
bootfile=uImage-dm355
nfshost=192.168.1.103
serverip=192.168.1.103
bootargs=console=ttyS0,115200n8 noinitrd ip=dhcp root=/dev/nfs rw
nfsroot=192.168.1.103:/home/ngohaibac/workdir/filesys, nolock mem=116M
bootcmd=nboot 0x80700000 0 0x400000; bootm
stdin=serial
stdout=serial
stderr=serial
videostd=ntsc
Thanks and best regards,
---
Hai Bac
Korea University of Technology and Education
BioRobotics Lab
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
