bootargs=console=ttyS0,115200n8=noinitrd rw ip=... should probably be more like bootargs=console=ttyS0,115200n8 noinitrd rw ip=... by removing the = sign after 115200n8, that is probably what is messing it up.
Regards, Bernie Thompson OMAP35x/Davinci Applications Digital Centralized Applications Team (DCAT) Texas Instruments [email protected] Check out the new E2E forums at https://community.ti.com/forums/ ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Muneendra Sent: Wednesday, April 22, 2009 7:33 AM To: Maupin, Chase; [email protected] Subject: RE: Kernel hangs while booting Importance: High Hi Chase Maupin, Thanks for reply. I have set the below console settings(console=ttyS0,115200n8). Below are my bootargs: bootdelay=3 baudrate=115200 bootfile=uImage nfshost=10.60.5.117 rootpath=/root/workdir/filesys subnet=255.255.255.0 bootcmd=tftpboot 0x80700000;bootm filesize=1576a8 fileaddr=80700000 serverip=10.60.5.117 ipaddr=10.60.5.110 bootargs=console=ttyS0,115200n8=noinitrd rw ip=10.60.5.110:10.60.5.117:10.60.5.1:255.255.255.0:ELXI1000::off root=/dev/nfs nfsroot=10.60.5.117:/workdir/files ys,nolock mem=120M stdin=serial stdout=serial stderr=serial ethaddr=00:0e:99:02:57:9c videostd=ntsc Still the issue reamins same. Regards, Muneendra. -----Original Message----- From: Maupin, Chase [mailto:[email protected]] Sent: Wednesday, April 22, 2009 5:46 PM To: [email protected]; [email protected] Subject: RE: Kernel hangs while booting Muneendra, Please check that you have console=ttyS0,115200n8 set in your bootargs variable in u-boot. This behaviour is usually the result of not having the proper console settings. Sincerely, Chase Maupin Software Applications Catalog DSP Products ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Muneendra Sent: Wednesday, April 22, 2009 6:52 AM To: [email protected] Subject: Kernel hangs while booting Importance: High Hi All, I have downloaded latest bsp linux-davinci-2.6-historic for dm6446 from git.I have compiled kernel and started it by U-Boot on a board and I get no output after U-Boot copied the kernel to RAM and jumped to it: Log: Filename 'uImage'. Load address: 0x80700000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ########################### done Bytes transferred = 1464768 (1659c0 hex) ## Booting image at 80700000 ... Image Name: Linux-2.6.28-davinci1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1464704 Bytes = 1.4 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux................................................................................................ done, booting the kernel. <nothing, no output> Please give me some input to boot the kernel. Regards, Muneendra The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it.
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
