Hi, Can you try with the following environment,
setenv bootargs console=ttyS0,115200n8 root=nfs rw mem=120M ip=192.168.0.125 nfsroot=192.168.0.238:/home/workdir/rootfs Regards, Madhu. On Wed, 2009-05-06 at 10:58 +0800, shaofeng zhang wrote: > Hi, Daniel, > > I am facing some probelms when I use the MontaVista Linux on my > DM6446 EVM. > > 1. I am use the LargePage Nand Flash (ST's NAND01GR3B2B NAND Flash ) > on my DM6446 EVM, When I use the MVL4.0 kernel on my board, I found > that the kernel would scan all the blocks of the whole nand flash as > bad blocks. However, When I use the MVL 5.0 Kernel on my board, the > kernel would find no bad blocks of the whole nand flash. So I want to > know how to > update the MTD drivers for the nand flash from MVL 4.0 to MVL 5.0? > could you give me some advies about that situation? > > 2. If the above problem would not be sovled correctly, I have to > change my kernel from MVL 4.0 to MVL 5.0. While I found that the MVL > 5.0 kernel could not mount the NFS correctly, the kernel would halt > mounting the NFS for ever, the following is the messages: > ======================= > IP-Config: Complete: > device=eth0, addr=192.168.0.125, mask=255.255.255.0, > gw=192.168.0.1, > host=XJTUIPCEVM, domain=, nis-domain=(none), > bootserver=192.168.0.238, rootserver=192.168.0.238, rootpath= > Looking up port of RPC 100003/2 on 192.168.0.238 > portmap: server 192.168.0.238 not responding, timed out > Root-NFS: Unable to get nfsd port number from server, using default > Looking up port of RPC 100005/1 on 192.168.0.238 > ======================== > But When I use the MVL 4.0 kernel, I found that the kernel woud > correctly mount the NFS with no errors. Between the two situations my > u-boot ENV is the same configurations: > bootargs=mem=120M console=ttyS0,115200n8 root=/dev/nfs noinitrd rw > ip=192.168.0.125:192.168.0.238:192.168.0.1:255.255.255.0:XJTUIPCEVM > nfsroot=192.168.0.238:/home/workdir/rootfs,nolock > video=dm64xxfb:output=pal > So I want to know whether there are some necessary differences about > the kernel configurations between the MVL 4.0 and MVL 5.0 or not. Such > as "make menuconfig", "u-boot env setting (bootargs, etc.)" > > Thand you, Hope for your reply. > > Zhang > > > _______________________________________________ > Davinci-linux-open-source mailing list > Davinci-linux-open-source@linux.davincidsp.com > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source