Jean-Philippe François a écrit :
Paulraj, Sandeep a écrit :
Jean_Philippe,
The reason for the DM365 serial flashing tools not being available at
this point of time is because the serial flashing tools are designed
in such a way that assumes the RBL to set the baud rate to 115200.
There is a bug in the RBL which sets it to 16/13 times of 115200.
Does this mean this version of the chip will never be bootable from
scratch from the serial port ?
Is there a documentation on how to boot from the sd card ?
Is there a way to reflash the card that does not include jtag ?
Thanks,
Sandeep
-----Original Message-----
From: davinci-linux-open-source-bounces+s-
paulraj=ti....@linux.davincidsp.com [mailto:davinci-linux-open-source-
bounces+s-paulraj=ti....@linux.davincidsp.com] On Behalf Of
Jean-Philippe
François
Sent: Monday, June 29, 2009 9:53 AM
To: davinci-linux-open-source
Subject: dm365 serial flashing tools ?
Hi,
I would like to modify and reflash u-boot on DM365.
There is a sourceforge project [1] for the serial flashing tools for
various davinci processor, but not for dm365.
The dvevm PSP contains a tar.gz archive named flash_utils, but in the
top level makefile, the dm36x is commented out.
Is there a tool somewhere to reflash u-boot and the ubl from the serial
port ?
Thank you,
Jean-Philippe François
[1]
http://sourceforge.net/project/showfiles.php?group_id=233754
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
