Philby, I tried running this patch against 2.6.31.rc2 (davinci kernel tree). But I got a crash as I run the application which is given below....
In my case, time out happens when I kill the capture application using Cntrl-C. After Cnrtl-C, the mt9t031 i2c device couldn't be contacted by the host (during cleanup, i2c commands fails). When the application is run again, I get following outputs.. i2c_davinci i2c_davinci.1: timeout waiting for bus ready i2c_davinci i2c_davinci.1: timeout waiting for bus ready Here are the complete log.... application running and pressed Cntrl-C ====> time:105 frame:33 time:105 frame:34vpfe-capture vpfe-capture: stream off failed in subdev Running it again ..... r...@158.218.100.186:/opt/git# ./fbdev_loopback -i2 -d0 main : Enter initializing capture device setting data format input.name = Composite input.name = S-Video input.name = Camera Calling S_INPUT with index = 2 i2c_davinci i2c_davinci.1: timeout waiting for bus ready i2c_davinci i2c_davinci.1: timeout waiting for bus ready i2c_davinci i2c_davinci.1: timeout waiting for bus ready i2c_davinci i2c_davinci.1: timeout waiting for bus ready vpfe-capture vpfe-capture: fh->io_allowed Error:InitDevice:ioctl:VIDIOC_S_INPUT : Bad address Error in setting capture format Failed to intialize capture start_streaming:ioctl:VIDIOC_STREAMOFF: main : Leave r...@158.218.100.186:/opt/git# r...@158.218.100.186:/opt/git# r...@158.218.100.186:/opt/git# r...@158.218.100.186:/opt/git# ./fbdev_loopback -i2 -d0 main : Enter initializing capture device setting data format input.name = Composite input.name = S-Video input.name = Camera Calling S_INPUT with index = 2 i2c_davinci i2c_davinci.1: timeout waiting for bus ready i2c_davinci i2c_davinci.1: timeout waiting for bus ready i2c_davinci i2c_davinci.1: initiating i2c bus recovery ------------[ cut here ]------------ WARNING: at drivers/gpio/gpiolib.c:83 gpio_ensure_requested+0x5c/0x128() autorequest GPIO-15 Modules linked in: Backtrace: [<c002b7a8>] (dump_backtrace+0x0/0x114) from [<c024d970>] (dump_stack+0x18/0x1c) r7:c73b1be8 r6:c0159d94 r5:c02cd20d r4:00000053 [<c024d958>] (dump_stack+0x0/0x1c) from [<c003c690>] (warn_slowpath_common+0x50/ 0x68) [<c003c640>] (warn_slowpath_common+0x0/0x68) from [<c003c6f4>] (warn_slowpath_fm t+0x30/0x38) r7:00000000 r6:c031ca08 r5:c033b1b4 r4:c031ca08 [<c003c6c4>] (warn_slowpath_fmt+0x0/0x38) from [<c0159d94>] (gpio_ensure_request ed+0x5c/0x128) r3:0000000f r2:c02cd224 [<c0159d38>] (gpio_ensure_requested+0x0/0x128) from [<c015a028>] (gpio_direction _input+0x80/0x140) r9:c6c892dc r8:c033b1b4 r7:c73b1cc4 r6:0000000f r5:60000093 r4:c031ca08 [<c0159fa8>] (gpio_direction_input+0x0/0x140) from [<c019fcf4>] (disable_i2c_pin s+0x34/0x6c) r9:c6c892dc r8:00000001 r7:c73b1cc4 r6:ffffb774 r5:c031cb68 r4:40000013 [<c019fcc0>] (disable_i2c_pins+0x0/0x6c) from [<c019ff90>] (i2c_davinci_xfer+0xf c/0x3f0) r5:00000000 r4:c6c41800 [<c019fe94>] (i2c_davinci_xfer+0x0/0x3f0) from [<c019d484>] (i2c_transfer+0xa4/0 xfc) [<c019d3e0>] (i2c_transfer+0x0/0xfc) from [<c0033064>] (dm355evm_enable_i2c_swit ch+0x6c/0x80) [<c0032ff8>] (dm355evm_enable_i2c_switch+0x0/0x80) from [<c00330b4>] (dm355evm_s etup_video_input+0x3c/0x54) r5:c6c89000 r4:00000000 [<c0033078>] (dm355evm_setup_video_input+0x0/0x54) from [<c01bba00>] (vpfe_s_inp ut+0xcc/0x284) [<c01bb934>] (vpfe_s_input+0x0/0x284) from [<c01aeaf0>] (__video_do_ioctl+0x19d8 /0x3374) [<c01ad118>] (__video_do_ioctl+0x0/0x3374) from [<c01b0774>] (video_ioctl2+0x2e8 /0x434) [<c01b048c>] (video_ioctl2+0x0/0x434) from [<c01ac2f8>] (v4l2_unlocked_ioctl+0x4 0/0x44) [<c01ac2b8>] (v4l2_unlocked_ioctl+0x0/0x44) from [<c00a2568>] (vfs_ioctl+0x34/0x 94) r7:c734d280 r6:c0045627 r5:bec58ac8 r4:c734d280 [<c00a2534>] (vfs_ioctl+0x0/0x94) from [<c00a2c2c>] (do_vfs_ioctl+0x56c/0x5c8) r7:c734d280 r6:00000004 r5:c734d280 r4:c73b4bf8 [<c00a26c0>] (do_vfs_ioctl+0x0/0x5c8) from [<c00a2cc8>] (sys_ioctl+0x40/0x64) [<c00a2c88>] (sys_ioctl+0x0/0x64) from [<c0027ea0>] (ret_fast_syscall+0x0/0x2c) r7:00000036 r6:00000000 r5:00000000 r4:40024db0 ---[ end trace 21b642dbca792ce4 ]--- ------------[ cut here ]------------ WARNING: at drivers/gpio/gpiolib.c:83 gpio_ensure_requested+0x5c/0x128() autorequest GPIO-14 Modules linked in: Backtrace: [<c002b7a8>] (dump_backtrace+0x0/0x114) from [<c024d970>] (dump_stack+0x18/0x1c) r7:c73b1be8 r6:c0159d94 r5:c02cd20d r4:00000053 [<c024d958>] (dump_stack+0x0/0x1c) from [<c003c690>] (warn_slowpath_common+0x50/ 0x68) [<c003c640>] (warn_slowpath_common+0x0/0x68) from [<c003c6f4>] (warn_slowpath_fm t+0x30/0x38) r7:00000000 r6:c031ca08 r5:c033b1a8 r4:c031ca08 [<c003c6c4>] (warn_slowpath_fmt+0x0/0x38) from [<c0159d94>] (gpio_ensure_request ed+0x5c/0x128) r3:0000000e r2:c02cd224 [<c0159d38>] (gpio_ensure_requested+0x0/0x128) from [<c0159ee4>] (gpio_direction _output+0x84/0x148) r9:c6c892dc r8:c033b1a8 r7:c73b1cc4 r6:0000000e r5:60000093 r4:c031ca08 [<c0159e60>] (gpio_direction_output+0x0/0x148) from [<c019fd00>] (disable_i2c_pi ns+0x40/0x6c) [<c019fcc0>] (disable_i2c_pins+0x0/0x6c) from [<c019ff90>] (i2c_davinci_xfer+0xf c/0x3f0) r5:00000000 r4:c6c41800 [<c019fe94>] (i2c_davinci_xfer+0x0/0x3f0) from [<c019d484>] (i2c_transfer+0xa4/0 xfc) [<c019d3e0>] (i2c_transfer+0x0/0xfc) from [<c0033064>] (dm355evm_enable_i2c_swit ch+0x6c/0x80) [<c0032ff8>] (dm355evm_enable_i2c_switch+0x0/0x80) from [<c00330b4>] (dm355evm_s etup_video_input+0x3c/0x54) r5:c6c89000 r4:00000000 [<c0033078>] (dm355evm_setup_video_input+0x0/0x54) from [<c01bba00>] (vpfe_s_inp ut+0xcc/0x284) [<c01bb934>] (vpfe_s_input+0x0/0x284) from [<c01aeaf0>] (__video_do_ioctl+0x19d8 /0x3374) [<c01ad118>] (__video_do_ioctl+0x0/0x3374) from [<c01b0774>] (video_ioctl2+0x2e8 /0x434) [<c01b048c>] (video_ioctl2+0x0/0x434) from [<c01ac2f8>] (v4l2_unlocked_ioctl+0x4 0/0x44) [<c01ac2b8>] (v4l2_unlocked_ioctl+0x0/0x44) from [<c00a2568>] (vfs_ioctl+0x34/0x 94) r7:c734d280 r6:c0045627 r5:bec58ac8 r4:c734d280 [<c00a2534>] (vfs_ioctl+0x0/0x94) from [<c00a2c2c>] (do_vfs_ioctl+0x56c/0x5c8) r7:c734d280 r6:00000004 r5:c734d280 r4:c73b4bf8 [<c00a26c0>] (do_vfs_ioctl+0x0/0x5c8) from [<c00a2cc8>] (sys_ioctl+0x40/0x64) [<c00a2c88>] (sys_ioctl+0x0/0x64) from [<c0027ea0>] (ret_fast_syscall+0x0/0x2c) r7:00000036 r6:00000000 r5:00000000 r4:40024db0 ---[ end trace 21b642dbca792ce5 ]--- vpfe-capture vpfe-capture: width = 1, height = 1, bpp = 1 InitDevice:ioctlvpfe-capture vpfe-capture: adjusted width = 32, height = 1, bpp = 1, bytesperline = 32, sizeimage = 32 :VIDIOC_S_INPUT,vpfe-capture vpfe-capture: width = 32768, height = 32768, bpp = 1 selected input vpfe-capture vpfe-capture: adjusted width = 2048, height = 1536, bpp = 1, bytesperline = 2048, sizeimage = 3145728 index = 2 InitDvpfe-capture vpfe-capture: width = 1280, height = 720, bpp = 1 evice:ioctl:VIDIvpfe-capture vpfe-capture: adjusted width = 1280, height = 720, bpp = 1, bytesperline = 1280, sizeimage = 921600 OC_G_INPUT, selected input, Camera Following standards available at the input InitDevice:ioctl:VIDIOC_CROPCAP Default crop capbility bounds - 34054 1073858848 0 0 ; default - 1073945068 3375 6 1 1 set_datvpfe-capture vpfe-capture: stream on failed in subdev a_format:setting data format Available image formats at the capture driver :- fmt_desc.index = 0 fmt_desc.type = 1 fmt_desc.description = Bayer GrRBGb 8bit A-Law compr. fmt_desc.pixelformat = 31384142 fmt_desc.index = 1 fmt_desc.type = 1 fmt_desc.description = Bayer GrRBGb - 16bit fmt_desc.pixelformat = 32525942 *******TRY_FMT (Min resolution) values before calling ioctl************* fmt.fmt.pix.width = 1 fmt.fmt.pix.height = 1 fmt.fmt.pix.field= 0 fmt.fmt.pix.bytesperline = 0 fmt.fmt.pix.sizeimage = 0 *******TRY_FMT values after calling ioctl************* fmt.fmt.pix.width = 32 fmt.fmt.pix.height = 1 fmt.fmt.pix.field= 1 fmt.fmt.pix.bytesperline = 32 fmt.fmt.pix.sizeimage = 32 *******TRY_FMT (Max resolution) values before calling ioctl************* fmt.fmt.pix.width = 32768 fmt.fmt.pix.height = 32768 fmt.fmt.pix.field= 0 fmt.fmt.pix.bytesperline = 0 fmt.fmt.pix.sizeimage = 0 *******TRY_FMT values after calling ioctl************* fmt.fmt.pix.width = 2048 fmt.fmt.pix.height = 1536 fmt.fmt.pix.field= 1 fmt.fmt.pix.bytesperline = 2048 fmt.fmt.pix.sizeimage = 3145728 set_data_format:ioctl:VIDIOC_S_FMT set_data_format:finally negotiated width:1280 height:720 set_data_format:driver reports bytes_per_line:1280(bug) set_data_format:driver reports size:921600(bug) set_data_format:Finally negotiated width:1280 height:720 initializing capture buffers device buffers:3 buffer:0 phy:0 mmap:0x4013f000 length:831488 buffer:1 phy:cb000 mmap:0x4020a000 length:831488 buffer:2 phy:196000 mmap:0x402d5000 length:831488 initializing display device Queing buffer:0 Queing buffer:1 Queing buffer:2 start_streaming:ioctl:VIDIOC_STREAMON: vpbe_UE_1 : Enter Starting loop.......... r...@158.218.100.186:/opt/git# ./fbdev_loopback -i2 -d0 main : Enter vpfe-capture vpfe-capture: width = 1, height = 1, bpp = 1 initializing capvpfe-capture vpfe-capture: adjusted width = 32, height = 1, bpp = 1, bytesperline = 32, sizeimage = 32 ture device setvpfe-capture vpfe-capture: width = 32768, height = 32768, bpp = 1 ting data formatvpfe-capture vpfe-capture: adjusted width = 2048, height = 1536, bpp = 1, bytesperline = 2048, sizeimage = 3145728 input.name = Cvpfe-capture vpfe-capture: width = 1280, height = 720, bpp = 1 omposite input.vpfe-capture vpfe-capture: adjusted width = 1280, height = 720, bpp = 1, b ytesperline = 1280, sizeimage = 921600 name = S-Video input.name = Camera Calling S_INPUT with index = 2 InitDevice:ioctl:VIDIOC_S_INPUT, selected input index = 2 InitDevice:ioctl:VIDIOC_G_INPUT, selected input, Camera Following standards avavpfe-capture vpfe-capture: stream on failed in subdev ilable at the input InitDevice:ioctl:VIDIOC_CROPCAP Default crop capbility bounds - 34054 1073858848 0 0 ; default - 1073945068 3375 6 1 1 set_data_format:setting data format Available image formats at the capture driver :- fmt_desc.index = 0 fmt_desc.type = 1 fmt_desc.description = Bayer GrRBGb 8bit A-Law compr. fmt_desc.pixelformat = 31384142 fmt_desc.index = 1 fmt_desc.type = 1 fmt_desc.description = Bayer GrRBGb - 16bit fmt_desc.pixelformat = 32525942 *******TRY_FMT (Min resolution) values before calling ioctl************* fmt.fmt.pix.width = 1 fmt.fmt.pix.height = 1 fmt.fmt.pix.field= 0 fmt.fmt.pix.bytesperline = 0 fmt.fmt.pix.sizeimage = 0 *******TRY_FMT values after calling ioctl************* fmt.fmt.pix.width = 32 fmt.fmt.pix.height = 1 fmt.fmt.pix.field= 1 fmt.fmt.pix.bytesperline = 32 fmt.fmt.pix.sizeimage = 32 *******TRY_FMT (Max resolution) values before calling ioctl************* fmt.fmt.pix.width = 32768 fmt.fmt.pix.height = 32768 fmt.fmt.pix.field= 0 fmt.fmt.pix.bytesperline = 0 fmt.fmt.pix.sizeimage = 0 *******TRY_FMT values after calling ioctl************* fmt.fmt.pix.width = 2048 fmt.fmt.pix.height = 1536 fmt.fmt.pix.field= 1 fmt.fmt.pix.bytesperline = 2048 fmt.fmt.pix.sizeimage = 3145728 set_data_format:ioctl:VIDIOC_S_FMT set_data_format:finally negotiated width:1280 height:720 set_data_format:driver reports bytes_per_line:1280(bug) set_data_format:driver reports size:921600(bug) set_data_format:Finally negotiated width:1280 height:720 initializing capture buffers device buffers:3 buffer:0 phy:0 mmap:0x4013f000 length:831488 buffer:1 phy:cb000 mmap:0x4020a000 length:831488 buffer:2 phy:196000 mmap:0x402d5000 length:831488 initializing display device Queing buffer:0 Queing buffer:1 Queing buffer:2 start_streaming:ioctl:VIDIOC_STREAMON: vpbe_UE_1 : Enter Starting loop.......... Murali Karicheri Software Design Engineer Texas Instruments Inc. Germantown, MD 20874 Phone : 301-515-3736 email: m-kariche...@ti.com >-----Original Message----- >From: Philby John [mailto:pj...@in.mvista.com] >Sent: Wednesday, July 15, 2009 3:29 AM >To: Karicheri, Muralidharan >Cc: Kevin Hilman; Ben Dooks; davinci-linux-open- >sou...@linux.davincidsp.com; linux-...@vger.kernel.org >Subject: RE: [PATCH 0/2] davinci i2c fixes for 2.6.31 > >Hello Murali, > > I will send a patch out to address this problem. > >Regards, >Philby > > >On Wed, 2009-07-08 at 10:25 -0500, Karicheri, Muralidharan wrote: >> Hi Kevin, >> >> When we do a video loopback with MT9T031, we get i2c timeouts when >application is killed using Cntrl C. Is it being addressed in any of the >patches? We had the same issue with TI LSP releases (1.20, 2.00, 2.1o etc). >> The board has to be rebooted to recover from this. >> >> Murali Karicheri >> Software Design Engineer >> Texas Instruments Inc. >> Germantown, MD 20874 >> Phone : 301-515-3736 >> email: m-kariche...@ti.com >> >> >-----Original Message----- >> >From: davinci-linux-open-source-bounces+m- >> >karicheri2=ti....@linux.davincidsp.com [mailto:davinci-linux-open- >source- >> >bounces+m-karicheri2=ti....@linux.davincidsp.com] On Behalf Of Kevin >Hilman >> >Sent: Wednesday, July 08, 2009 9:30 AM >> >To: Ben Dooks >> >Cc: davinci-linux-open-source@linux.davincidsp.com; linux- >> >i...@vger.kernel.org >> >Subject: Re: [PATCH 0/2] davinci i2c fixes for 2.6.31 >> > >> >Ben Dooks <ben-li...@fluff.org> writes: >> > >> >> On Mon, Jul 06, 2009 at 03:48:34PM -0700, Kevin Hilman wrote: >> >>> Here are a couple fixes for the i2c driver on the TI DaVinci family >> >>> of SoCs. These have been tested for awhile in the DaVinci git >> >>> repo are needed for 2.6.31. >> >>> >> >>> These apply on v2.6.31-rc2. >> >> >> >> ok, do you have a git branch to pull, or should I apply >> >> them from the mailing list> >> > >> >You can take from the list. My git branch has a bunch of other >> >non-i2c changes in it as well. >> > >> >Thanks, >> > >> >Kevin >> > >> >>> David Brownell (1): >> >>> i2c-davinci: behave with i2cdetect >> >>> >> >>> Kevin Hilman (1): >> >>> i2c-davinci: convert clock usage after clkdev conversion >> >>> >> >>> drivers/i2c/busses/i2c-davinci.c | 20 +++++++++++++++----- >> >>> 1 files changed, 15 insertions(+), 5 deletions(-) >> >>> >> >>> -- >> >>> To unsubscribe from this list: send the line "unsubscribe linux-i2c" >in >> >>> the body of a message to majord...@vger.kernel.org >> >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> >> >> -- >> >> Ben (b...@fluff.org, http://www.fluff.org/) >> >> >> >> 'a smiley only costs 4 bytes' >> > >> >_______________________________________________ >> >Davinci-linux-open-source mailing list >> >Davinci-linux-open-source@linux.davincidsp.com >> >http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source >> _______________________________________________ >> Davinci-linux-open-source mailing list >> Davinci-linux-open-source@linux.davincidsp.com >> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
