On Wednesday 22 July 2009, Vipin Bhandari wrote:
> This patch corrects the support for MMCSD card detection
> and read only feature for SoC DM355.
> 
> EVMDM355_ECP_VA4.pdf, from Spectrum digital, suggests that
> Bit 2 and 4 should be checked for card detection. However
> on the EVM, bits 1 and 3 gives this status, for MMC/SD
> instance 0 and 1 respectively. The pdf also suggests that
> Bit 1 and 3 should be checked for write protection. However
> on the EVM bits 2 and 4 gives this status.

In short:  card detection works iff the writeprotect switch
isn't used, since the two signals are swapped.

> 
> This document can be downloaded from
> http://c6000.spectrumdigital.com/evmdm355/reve/files/EVMDM355_ECP_VA4.pdf
> 
> Signed-off-by: Vipin Bhandari <vipin.bhand...@ti.com>

Acked-by: David Brownell <dbrown...@users.sourceforge.net>

.... but this should merge through the MFD tree.  Send it to
(per MAINTAINERS):

MULTIFUNCTION DEVICES (MFD)
P:      Samuel Ortiz
M:      sa...@linux.intel.com
T:      git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git
S:      Supported
F:      drivers/mfd/

> ---
>  This patch has been tested on DM355 EVM.
> 
>  Since the previous version, format of the multi-line comment
>  has been corrected.
> 
>  drivers/mfd/dm355evm_msp.c |   12 ++++++++++--
>  1 files changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
> index 5b6e58a..3d4a861 100644
> --- a/drivers/mfd/dm355evm_msp.c
> +++ b/drivers/mfd/dm355evm_msp.c
> @@ -107,8 +107,16 @@ static const u8 msp_gpios[] = {
>       MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1),
>       MSP_GPIO(4, SWITCH1),
>       /* switches on MMC/SD sockets */
> -     MSP_GPIO(1, SDMMC), MSP_GPIO(2, SDMMC), /* mmc0 WP, nCD */
> -     MSP_GPIO(3, SDMMC), MSP_GPIO(4, SDMMC), /* mmc1 WP, nCD */
> +     /*
> +      * Note: EVMDM355_ECP_VA4.pdf suggests that Bit 2 and 4 should be
> +      * checked for card detection. However on the EVM bit 1 and 3 gives
> +      * this status, for 0 and 1 instance respectively. The pdf also
> +      * suggests that Bit 1 and 3 should be checked for write protection.
> +      * However on the EVM bit 2 and 4 gives this status,for 0 and 1
> +      * instance respectively.
> +      */
> +     MSP_GPIO(2, SDMMC), MSP_GPIO(1, SDMMC), /* mmc0 WP, nCD */
> +     MSP_GPIO(4, SDMMC), MSP_GPIO(3, SDMMC), /* mmc1 WP, nCD */
>  };
>  
>  #define MSP_GPIO_REG(offset) (msp_gpios[(offset)] >> 3)
> -- 
> 1.5.6
> 
> _______________________________________________
> Davinci-linux-open-source mailing list
> Davinci-linux-open-source@linux.davincidsp.com
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
> 
> 




_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to