hye gyez i jst want to create a simple HELLO world appication for my Davinci using cross compiler ELDK have downloaded the u-boot source from git when in that source code there are examples of the u-boot.in those examples there is example of hello world also when i compile it i get binary and when i load dis binary using u boot command loadb and run it using go 0x80700000 it get halts does anyone have any idea about it. U-Boot 2009.06-rc2 (Aug 22 2009 - 16:01:10) I2C: ready DRAM: 256 MB NAND: 256 MiB In: serial Out: serial Err: serial ARM Clock: 297MHz DDR Clock: 162MHz Read from EEPROM @ 0x50 failed Ethernet PHY: GENERIC @ 0x1f U-Boot > loadb ## Ready for binary (kermit) download to 0x80700000 at 115200 bps... ## Total Size = 0x00000228 = 552 Bytes ## Start Addr = 0x80700000 U-Boot > go 0x80700000 ## Starting application at 0x80700000 ...
_______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source