Hi rohan please find my reply in line .. check your bootargs .. On Mon, Sep 14, 2009 at 5:01 PM, rohan tabish <rohan_ja...@yahoo.co.uk>wrote:
> Thanks for your reply > it is from u-boot level. > Actullay i am trying to mount the filesystem using NFS but unable to mount > it.you can see it from my log says unable to get the mountd portnumber from > the server.my NFS server is i think working fine as i am uanble to mount it > on the client.Also i am able to download the uImage using nfs to my board > can you tell what problem is it.my firewall is disabled > > I have mounted my host on a client PC it is working fine now when i connect > it to the board it gives following error > > U-Boot > printenv > baudrate=115200 > ethaddr=00:1C:C0:0A:00:01 > bootm=0x80700000 > filesize=200000 > fileaddr=80700000 > gatewayip=172.16.0.10 > netmask=255.255.240.0 > bootcmd_nand=nand read 0x80700000 0x100000 0x200000; bootm 0x80700000 > bootfile=/home/admin/uImage > serverip=172.16.0.97 > bootdelay=10 > bootcmd=nboot 0x80700000 0 100000; bootm > nfshost=172.16.1.244 > rootpath=/home/rohan/workdir/ > ipaddr=172.16.0.92 > bootargs=console=ttyS0,115200n8 noinitrd rw root=/dev/nfs > nfsroot=172.16.1.244:/ > home/rohan/workdir ,nolock mem=120M > Are you not missing root=/dev/nfs ip=dhcp ??? you need to assign ip either static or dynamic (using dhcp) and make sure nfs is enabled in kerenl.. stdin=serial > stdout=serial > stderr=serial > videostd=ntsc > ver=U-Boot 2009.06-rc2 (Aug 22 2009 - 16:01:10) > > Environment size: 643/131068 bytes > > > U-Boot > boot > > Loading from NAND 256MiB 1,8V 8-bit, offset 0x100000 > Image Name: Linux-2.6.31-rc5-davinci1 > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 1478780 Bytes = 1.4 MB > Load Address: 80008000 > Entry Point: 80008000 > ## Booting kernel from Legacy Image at 80700000 ... > Image Name: Linux-2.6.31-rc5-davinci1 > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 1478780 Bytes = 1.4 MB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > Loading Kernel Image ... OK > OK > > Starting kernel ... > > Uncompressing > Linux............................................................. > ................................... done, booting the kernel. > Linux version 2.6.31-rc5-davinci1 (r...@skw) (gcc version 4.2.2) #1 > PREEMPT Thu > Aug 20 11:17:51 WIT 2009 > CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 > CPU: VIVT data cache, VIVT instruction cache > Machine: DaVinci DM644x EVM > Memory policy: ECC disabled, Data cache writeback > DaVinci dm6446a variant 0x1 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 30480 > Kernel command line: console=ttyS0,115200n8 noinitrd rw root=/dev/nfs > nfsroot=17 > 2.16.1.244:/home/rohan/workdir,nolock mem=120M > PID hash table entries: 512 (order: 9, 2048 bytes) > Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) > Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) > Memory: 120MB = 120MB total > Memory: 118512KB available (2708K code, 295K data, 124K init, 0K highmem) > SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > NR_IRQS:229 > Console: colour dummy device 80x30 > Calibrating delay loop... 147.86 BogoMIPS (lpj=739328) > Mount-cache hash table entries: 512 > CPU: Testing write buffer coherency: ok > DaVinci: 71 gpio irqs > NET: Registered protocol family 16 > WARNING: both IDE and Flash are enabled, but they share AEMIF pins. > Disable IDE for NAND/NOR support. > MUX: Setting register HPIEN_DISABLE > PINMUX0 (0x00000000) = 0x80000c1f -> 0x80000c1f > MUX: initialized ATAEN > MUX: Setting register ATAEN > PINMUX0 (0x00000000) = 0x80000c1f -> 0x80020c1f > MUX: initialized HDIREN > MUX: Setting register HDIREN > PINMUX0 (0x00000000) = 0x80020c1f -> 0x80030c1f > MUX: initialized MCBSP > MUX: Setting register MCBSP > PINMUX1 (0x00000004) = 0x00000081 -> 0x00000481 > bio: create slab <bio-0> at 0 > pcf857x: probe of 1-0038 failed with error -121 > pcf857x: probe of 1-0039 failed with error -121 > pcf857x: probe of 1-003a failed with error -121 > NET: Registered protocol family 2 > IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > TCP established hash table entries: 4096 (order: 3, 32768 bytes) > TCP bind hash table entries: 4096 (order: 2, 16384 bytes) > TCP: Hash tables configured (established 4096 bind 4096) > TCP reno registered > NET: Registered protocol family 1 > msgmni has been set to 231 > io scheduler noop registered > io scheduler anticipatory registered (default) > Setting Up Clocks for DM420 OSD > Console: switching to colour frame buffer device 90x30 > fb0: dm_osd0_fb frame buffer device > fb1: dm_vid0_fb frame buffer device > fb2: dm_osd1_fb frame buffer device > fb3: dm_vid1_fb frame buffer device > Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled > Platform driver 'serial8250' needs updating - please use dev_pm_ops > serial8250.0: ttyS0 at MMIO 0x1c20000 (irq = 40) is a 16550A > console [ttyS0] enabled > serial8250 serial8250.0: unable to register port at index 1 (IO0 MEM1c20400 > IRQ4 > 1): -22 > serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1c20800 > IRQ4 > 2): -22 > brd: module loaded > at24 1-0050: 32768 byte 24c256 EEPROM (writable) > davinci_emac_probe: using random MAC addr: 76:ef:60:a9:74:0b > emac-mii: probed > dm9000 Ethernet Driver, V1.31 > Platform driver 'dm9000' needs updating - please use dev_pm_ops > console [netcon0] enabled > netconsole: network logging started > i2c /dev entries driver > TCP cubic registered > NET: Registered protocol family 17 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > Clocks: disable unused uart1 > Clocks: disable unused uart2 > Clocks: disable unused ide > Clocks: disable unused asp0 > Clocks: disable unused mmcsd > Clocks: disable unused spi > Clocks: disable unused usb > Clocks: disable unused vlynq > Clocks: disable unused pwm0 > Clocks: disable unused pwm1 > Clocks: disable unused pwm2 > Clocks: disable unused timer1 > Looking up port of RPC 100003/2 on 172.16.1.244 > rpcbind: server 172.16.1.244 not responding, timed out > Root-NFS: Unable to get nfsd port number from server, using default > Root-NFS: Unable to get nfsd port number from server, using default > Looking up port of RPC 100005/1 on 172.16.1.244 > rpcbind: server 172.16.1.244 not responding, timed out > Root-NFS: Unable to get mountd port number from server, using default > Root-NFS: Server returned error -5 while mounting /home/rohan/dir > VFS: Unable to mount root fs via NFS, trying floppy. > VFS: Cannot open root device "nfs" or unknown-block(2,0) > Please append a correct "root=" boot option; here are the available > partitions: > Kernel panic - not syncing: VFS: Unable to mount root fs on > unknown-block(2,0) > > > > --- On *Mon, 14/9/09, Deepak Mundra <deepa...@allaboutif.com>* wrote: > > > From: Deepak Mundra <deepa...@allaboutif.com> > Subject: Re: ping problem on DM6446 > To: "rohan tabish" <rohan_ja...@yahoo.co.uk> > Cc: davinci-linux-open-source@linux.davincidsp.com > Date: Monday, 14 September, 2009, 12:07 PM > > > > Hi, > > Is it from uboot level or file system level ? which file system are > you using ... > > > On Mon, Sep 14, 2009 at 11:52 AM, rohan tabish > <rohan_ja...@yahoo.co.uk<http://mc/compose?to=rohan_ja...@yahoo.co.uk> > > wrote: > >> Hey guys i am using DM6446.I think there is something wrong with the board >> the board is able to ping all the other PC's on the network but is other >> computer are unable to ping the board.The board is also unable to ping >> itself. >> >> >> With Regard's >> >> Rohan Tabish >> >> >> _______________________________________________ >> Davinci-linux-open-source mailing list >> Davinci-linux-open-source@linux.davincidsp.com<http://mc/compose?to=davinci-linux-open-sou...@linux.davincidsp.com> >> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source >> >> > >
_______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
