The motivation behind the change is to use the same
definitions in the assembly code responsible for
suspending the SoC, a part of which is to clock gate
the DDR2 clock.
Note that the assembly code cannot invoke the C function
meant for this. The main reason being that stack in DDR2
cannot be accessed while DDR2 clock is being clock gated.
Signed-off-by: Sekhar Nori <nsek...@ti.com>
---
arch/arm/mach-davinci/include/mach/psc.h | 11 +++++++++++
arch/arm/mach-davinci/psc.c | 11 -----------
2 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-davinci/include/mach/psc.h
b/arch/arm/mach-davinci/include/mach/psc.h
index 171173c..2776b23 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -180,6 +180,17 @@
#define DA8XX_LPSC1_CR_P3_SS 26
#define DA8XX_LPSC1_L3_CBA_RAM 31
+/* PSC register offsets */
+#define EPCPR 0x070
+#define PTCMD 0x120
+#define PTSTAT 0x128
+#define PDSTAT 0x200
+#define PDCTL1 0x304
+#define MDSTAT 0x800
+#define MDCTL 0xA00
+
+#define MDSTAT_STATE_MASK 0x1f
+
extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
unsigned int id, char enable);
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 04a3cb7..adf6b5c 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -25,17 +25,6 @@
#include <mach/cputype.h>
#include <mach/psc.h>
-/* PSC register offsets */
-#define EPCPR 0x070
-#define PTCMD 0x120
-#define PTSTAT 0x128
-#define PDSTAT 0x200
-#define PDCTL1 0x304
-#define MDSTAT 0x800
-#define MDCTL 0xA00
-
-#define MDSTAT_STATE_MASK 0x1f
-
/* Return nonzero iff the domain's clock is active */
int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
{
--
1.6.2.4
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
