From: Vipin Bhandari <[email protected]> The DA830/OMAP-L137 EVM has GPIO based card detection logic, but the current code does not use it.
Add support for GPIO based card detection to avoid reading the card to see if a card is present or not. Signed-off-by: Vipin Bhandari <[email protected]> Signed-off-by: Sekhar Nori <[email protected]> --- This is a replacement for patch submitted by Vipin earlier. http://patchwork.kernel.org/patch/69999/ The patch has been split into two and the description updated. arch/arm/mach-davinci/board-da830-evm.c | 15 +++++++++++++++ 1 files changed, 15 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index dc19870..8e67037 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -229,14 +229,21 @@ static const short da830_evm_mmc_sd_pins[] = { }; #define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1) +#define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2) static int da830_evm_mmc_get_ro(int index) { return gpio_get_value(DA830_MMCSD_WP_PIN); } +static int da830_evm_mmc_get_cd(int index) +{ + return !gpio_get_value(DA830_MMCSD_CD_PIN); +} + static struct davinci_mmc_config da830_evm_mmc_config = { .get_ro = da830_evm_mmc_get_ro, + .get_cd = da830_evm_mmc_get_cd, .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, @@ -262,6 +269,14 @@ static inline void da830_evm_init_mmc(void) } gpio_direction_input(DA830_MMCSD_WP_PIN); + ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n"); + if (ret) { + pr_warning("da830_evm_init: can not open GPIO %d\n", + DA830_MMCSD_CD_PIN); + return; + } + gpio_direction_input(DA830_MMCSD_CD_PIN); + ret = da8xx_register_mmcsd0(&da830_evm_mmc_config); if (ret) { pr_warning("da830_evm_init: mmc/sd registration failed: %d\n", -- 1.6.2.4 _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
