Brian, On Wed, Jun 16, 2010 at 23:07:45, Nicolas Luna wrote: > Brian, > > I changed .io_type from SPI_IO_TYPE_DMA to SPI_IO_TYPE_INTR with > ".intr_level = 1". My kernel it not freezing at startup and both devices > (CS1 and CS2) are still working fine. Anything else you would like to check? > > Nicolas > > > > On Wed, Jun 16, 2010 at 12:54 PM, Brian Niebuhr <bnieb...@efjohnson.com> > wrote: > > > > I modified board-da850-evm.c with what you proposed and it's > > working very well. I didn't test the spi flash (because I do > > not have one on my custum hardware), but my 2 SPI CS > > (spidev1.1 and spidev1.2) are working. > > > Nicolas - > > Would you mind taking a few minutes and testing interrupt mode for the > devices on your board? I'm trying to reproduce the issue that Sudhakar > was seeing, and I would appreciate additional testing if you've got the > time. >
My mistake, I had not set "intr_level" to 1. When I set intr_level to 1, even interrupt mode is working fine. Are you planning to submit any new version of this patch series to the list after addressing the minor comments I had? Thanks, Sudhakar _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source