On Friday 24 September 2010 05:41:57 pm Kevin Hilman wrote: > Victor Rodriguez <vm.ro...@gmail.com> writes: > > This patch adds initial support for the Hawkboard-L138 system > > It is under the machine name "omapl138_hawkboard". > > This system is based on the da850 davinci CPU architecture. > > Information on these system may be found at http://www.hawkboard.org. > > Basic support for the UART console is included in this patch. > > It's tested with latest Angstrom File Systems like ramdisk > > from http://alturl.com/imb45. > > > > Signed-off-by: Victor Rodriguez <victor.rodrig...@sasken.com> > > --- > > Changes since v6: > > 1) Change commit reference > > 2) Remove hack that shut down UART1 because > > it is unused at present on the hawkboard. > > Thanks for removing this. > > Applying and queuing for 2.6.37 in davinci-next. > > Kevin >
This commit is missing as of today. I can't see this in your tree, commit is present but changes are not there. master branch has nothing related to Hawk. All changes are dissappearing after following commit: commit 3b910ca5eef70179ee4b2c9f195df6da4f402532 Author: Michael Williamson <michael.william...@criticallink.com> Date: Fri Sep 17 09:56:06 2010 -0400 davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom For the MityDSP-L138/MityARM-1808 SOMS, read the factory assigned MAC address from the onboard I2C EPROM and assign it to the emac device during platform initialization. Signed-off-by: Michael Williamson <michael.william...@criticallink.com> Signed-off-by: Kevin Hilman <khil...@deeprootsystems.com> arch/arm/mach-davinci/board-mityomapl138.c | 62 1 files changed, 62 insertions(+), 0 deletions(-) Am I missing something? Thanks, Caglar _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source