Hi Ben, On Fri, Nov 19, 2010 at 21:10:50, Ben Gardiner wrote:
> >> [...] > > > > How does gpio_request prevent sysfs control? > > To obtain access to a gpio through the sysfs interface the user must > first write the gpio number to 'export'. When the gpio has been > gpio_request()'d the result of writing to 'export' is nothing; whereas > writing to export would normally result in the appearance of a named > gpio line alongside 'export'. > > I hope the following commands and their output illustrate my point: > > $ cd /sys/class/gpio/ > $ ls > export gpiochip128 gpiochip160 gpiochip64 unexport > gpiochip0 gpiochip144 gpiochip32 gpiochip96 > $ echo 160 > export > $ ls > export gpiochip128 gpiochip160 gpiochip64 unexport > gpiochip0 gpiochip144 gpiochip32 gpiochip96 > $ echo 163 > export > $ ls > export gpiochip128 gpiochip160 gpiochip64 tp_22 > gpiochip0 gpiochip144 gpiochip32 gpiochip96 unexport Thanks for the explanation. I should have probably asked earlier, why do we need to prevent sysfs access of deep sleep enable and sw reset pins? We don't seem to be using them in the kernel either. Thanks, Sekhar _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
