Certain SOC platforms utilize the 8250 serial UART core that do not provide
valid modem control lines (in particular, CTS). A mechanism is needed to
allow platforms to configure the 8250 driver to disable modem status interrupts.
Add a new UPF_NO_MSR flag and use it to check for the condition.
This patch was tested using a MityDSP-L138F platform having a UART CTS pin
connected to a clock signal (and configured, via pinmux, as a clock input
for another peripheral function).
Signed-off-by: Michael Williamson <michael.william...@criticallink.com>
---
Tested against linux-davinci tree.
Checked that patch against davinci-next was successful.
drivers/serial/8250.c | 3 ++-
include/linux/serial_core.h | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 09a5508..5b9e9f3 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2613,7 +2613,8 @@ static void serial8250_config_port(struct uart_port
*port, int flags)
autoconfig(up, probeflags);
/* if access method is AU, it is a 16550 with a quirk */
- if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
+ if ((up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) ||
+ up->port.flags & UPF_NO_MSR)
up->bugs |= UART_BUG_NOMSR;
if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 212eb4c..e76064e 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -339,6 +339,7 @@ struct uart_port {
#define UPF_BUGGY_UART ((__force upf_t) (1 << 14))
#define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15))
#define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16))
+#define UPF_NO_MSR ((__force upf_t) (1 << 17))
#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
/* The exact UART type is known and should not be probed. */
@@ -348,7 +349,7 @@ struct uart_port {
#define UPF_DEAD ((__force upf_t) (1 << 30))
#define UPF_IOREMAP ((__force upf_t) (1 << 31))
-#define UPF_CHANGE_MASK ((__force upf_t) (0x17fff))
+#define UPF_CHANGE_MASK ((__force upf_t) (0x37fff))
#define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
unsigned int mctrl; /* current modem ctrl
settings */
--
1.7.0.4
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
