--------------------------------------------------
From: "Sergei Shtylyov" <sshtyl...@mvista.com>
Sent: Saturday, February 12, 2011 12:15 AM
To: "Subhasish Ghosh" <subhas...@mistralsolutions.com>
Cc: <davinci-linux-open-source@linux.davincidsp.com>;
<sa...@mistralsolutions.com>; "Russell King" <li...@arm.linux.org.uk>;
"Kevin Hilman" <khil...@deeprootsystems.com>; <nsek...@ti.com>; "open list"
<linux-ker...@vger.kernel.org>; <m-watk...@ti.com>;
<linux-arm-ker...@lists.infradead.org>
Subject: Re: [PATCH v2 06/13] da850: pruss CAN board specific additions.
Subhasish Ghosh wrote:
This patch adds the pruss CAN pin mux and registers the device
with the pruss mfd driver.
Signed-off-by: Subhasish Ghosh <subhas...@mistralsolutions.com>
[...]
diff --git a/arch/arm/mach-davinci/board-da850-evm.c
b/arch/arm/mach-davinci/board-da850-evm.c
index 242d1ed..2ce5536 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1053,8 +1053,43 @@ static __init int da850_evm_init_cpufreq(void)
[...]
static struct da8xx_pruss_devices pruss_devices[] = {
- {.dev_name = NULL,},
+ {
+ .dev_name = "da8xx_pruss_can",
+ .pdata = &can_data,
+ .pdata_size = sizeof(can_data),
+ .setup = da850_evm_setup_pruss_can,
+ },
+ {
+ .dev_name = NULL,
+ },
No need to explicitly initialize to NULL.
SG -- ok, Will remove
WBR, Sergei
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
