Hello Nori, Nori, Sekhar wrote: > On Thu, Dec 08, 2011 at 13:17:05, Heiko Schocher wrote: > >>>> diff --git a/Documentation/devicetree/bindings/arm/davinci/aemif.txt >>>> b/Documentation/devicetree/bindings/arm/davinci/aemif.txt >>>> new file mode 100644 >>>> index 0000000..c9ed551 >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/arm/davinci/aemif.txt >>>> @@ -0,0 +1,85 @@ >>>> +* Texas Instruments Davinci AEMIF >>>> + >>>> +This file provides information, what the device node for the >>>> +davinci aemifa interface contain. >>> ^^^^^^ >>> aemif >> fixed, thanks. >> >>>> + >>>> +Required properties: >>>> +- compatible: "ti,davinci-emifa"; >> Shouldn't this also be "ti,davinci-aemif" ? > > Yes, makes sense.
Ok, change this. >> [...] >>>> diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c >>>> index 1ce70a9..12c559f 100644 >>>> --- a/arch/arm/mach-davinci/aemif.c >>>> +++ b/arch/arm/mach-davinci/aemif.c >>>> @@ -13,12 +13,14 @@ >>>> #include <linux/err.h> >>>> #include <linux/clk.h> >>>> #include <linux/module.h> >>>> +#include <linux/of.h> >>>> +#include <linux/of_address.h> >>>> #include <linux/time.h> >>>> >>>> #include <mach/aemif.h> >>>> >>>> /* Timing value configuration */ >>>> - >>>> +#define ASIZE(x) (x) >>>> #define TA(x) ((x) << 2) >>>> #define RHOLD(x) ((x) << 4) >>>> #define RSTROBE(x) ((x) << 7) >>>> @@ -26,7 +28,10 @@ >>>> #define WHOLD(x) ((x) << 17) >>>> #define WSTROBE(x) ((x) << 20) >>>> #define WSETUP(x) ((x) << 26) >>>> +#define EW(x) ((x) << 30) >>>> +#define SS(x) ((x) << 31) >>> You are adding support for additional configuration >>> parameters which should be done in a separate patch. >> Hmm.. they are only used in the OF case ... is this split >> really needed? > > But they should also be useful in the non-OF case, no? > Why restrict their usage to the OF case? I thought there is no need, because nobody needed this yet ... Ok, I change this too, so I have to fix this files: $ grep -lr davinci_aemif_timing . ./arch/arm/mach-davinci/board-dm644x-evm.c ./arch/arm/mach-davinci/board-dm646x-evm.c ./arch/arm/mach-davinci/board-da850-evm.c ./arch/arm/mach-davinci/include/mach/aemif.h ./arch/arm/mach-davinci/include/mach/nand.h ./arch/arm/mach-davinci/board-da830-evm.c ./drivers/mtd/nand/davinci_nand.c I do not know the values for this boards for the new parameters. How to proceed? Do you know this values? Or is it Ok, if I add in arch/arm/mach-davinci/include/mach/aemif.h a "#define AEMIF_VALUE_NOT USED 0xff" and if the new value is set to this I don't change this setting in the register? bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source