Sudhakar, Thanks for your response. I will look into this and hope it will help.
Murali Karicheri Software Design Engineer email: m-kariche...@ti.com Phone: (301) 407 9583 >> -----Original Message----- >> From: Rajashekhara, Sudhakar >> Sent: Tuesday, January 31, 2012 11:48 PM >> To: Karicheri, Muralidharan; davinci-linux-open-source@linux.davincidsp.com; >> Nori, Sekhar >> Subject: RE: UBIFS with davinci NAND driver - ECC error >> >> Hi Murali, >> >> On Wed, Feb 01, 2012 at 02:51:03, Karicheri, Muralidharan wrote: >> > Hi, >> > >> > I am trying to use UBIFS in my project and we are using the davinci >> > nand driver with a flash part that has page size of 2048, block size >> > of 128KiB and size of 128MiB. I have done following to boot the kernel >> > with a UBIFS rootfs. >> > >> >> Please refer to http://processors.wiki.ti.com/index.php/UBIFS_Support >> which has steps to get UBIFS working on AM335x. But I followed these >> steps and was able to get UBIFS working on OMAP-L138. The bootargs I >> used from U-Boot are as below: >> >> setenv bootargs mem=32M console=ttyS2,115200n8 root=ubi0:rootfs rw >> rootfstype=ubifs ubi.mtd=4,2048 ip=dhcp >> >> Note that I also faced similar booting issues when I was using mkfs.ubifs >> version 1.3 on the host system to generate the UBIFS file system. The >> issue went away when I used v 1.4.8. >> >> Thanks, >> Sudhakar _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source