Hi,

On Thu, Feb 23, 2012 at 16:44:17, Christian Riesch wrote:
> This patch fixes a regression that was introduced by
> 
> commit 0a5f38467765ee15478db90d81e40c269c8dda20
> davinci_emac: Add Carrier Link OK check in Davinci RX Handler
> 
> Said commit adds a check whether the carrier link is ok. If the link is
> not ok, the skb is freed and no new dma descriptor added to the rx dma
> channel. This causes trouble during initialization when the carrier
> status has not yet been updated. If a lot of packets are received while
> netif_carrier_ok returns false, all dma descriptors are freed and the
> rx dma transfer is stopped.
> 
> The bug occurs when the board is connected to a network with lots of
> traffic and the ifconfig down/up is done, e.g., when reconfiguring
> the interface with DHCP.
> 
> The bug can be reproduced by flood pinging the davinci board while doing
> ifconfig eth0 down
> ifconfig eth0 up
> on the board.
> 
> After that, the rx path stops working and the overrun value reported
> by ifconfig is counting up.
> 
> This patch reverts commit 0a5f38467765ee15478db90d81e40c269c8dda20
> and instead issues warnings only if cpdma_chan_submit returns -ENOMEM.
> 
> Signed-off-by: Christian Riesch <christian.rie...@omicron.at>
> Cc: <sta...@vger.kernel.org>
> Cc: Hegde, Vinay <vinay.he...@ti.com>
> Cc: Cyril Chemparathy <cy...@ti.com>
> Cc: Sascha Hauer <s.ha...@pengutronix.de>
> ---
> 
> Hi,
> Since my first submission of this patch yesterday I did additional tests
> with suspend/rtcwake. My tests confirmed that the solution in this
> patch solves the problem that was addressed by commit
> 0a5f38467765ee15478db90d81e40c269c8dda20 while not destroying the
> rx communication channel. 
> 

Tested on DA850 and confirmed that there is no regression.

Tested-by: Rajashekhara, Sudhakar <sudhakar....@ti.com>

Regards,
Sudhakar
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to