From: Lad, Prabhakar <prabhakar....@ti.com> add OF support for the tvp514x driver.
Signed-off-by: Lad, Prabhakar <prabhakar....@ti.com> Cc: Hans Verkuil <hans.verk...@cisco.com> Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com> Cc: Mauro Carvalho Chehab <mche...@redhat.com> Cc: Guennadi Liakhovetski <g.liakhovet...@gmx.de> --- This patch is on top of following patches: 1: https://patchwork.kernel.org/patch/1930941/ 2: http://patchwork.linuxtv.org/patch/16193/ 3: https://patchwork.kernel.org/patch/1944901/ .../devicetree/bindings/media/i2c/tvp514x.txt | 30 ++++++++++ drivers/media/i2c/tvp514x.c | 60 ++++++++++++++++++-- 2 files changed, 85 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp514x.txt diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt new file mode 100644 index 0000000..3cce323 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt @@ -0,0 +1,30 @@ +* Texas Instruments TVP514x video decoder + +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip +digital video decoder that digitizes and decodes all popular baseband analog +video formats into digital video component. The tvp514x decoder supports analog- +to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D +conversion and decoding of NTSC, PAL and SECAM composite and S-video into +component YCbCr. + +Required Properties : +- compatible: Must be "ti,tvp514x-decoder" +- hsync-active: HSYNC Polarity configuration for current interface. +- vsync-active: VSYNC Polarity configuration for current interface. +- data-active: Clock polarity of the current interface. + +Example: + +i2c0@1c22000 { + ... + ... + + tvp514x@5c { + compatible = "ti,tvp514x-decoder"; + reg = <0x5c>; + hsync-active = <1>; /* Active low (Defaults to 0) */ + hsync-active = <1>; /* Active low (Defaults to 0) */ + data-active = <0>; /* Active low (Defaults to 0) */ + }; + ... +}; diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c index a4f0a70..0e2b15c 100644 --- a/drivers/media/i2c/tvp514x.c +++ b/drivers/media/i2c/tvp514x.c @@ -12,6 +12,7 @@ * Hardik Shah <hardik.s...@ti.com> * Manjunath Hadli <m...@ti.com> * Karicheri Muralidharan <m-kariche...@ti.com> + * Prabhakar Lad <prabhakar....@ti.com> * * This package is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -930,6 +931,50 @@ static struct tvp514x_decoder tvp514x_dev = { }; +#if defined(CONFIG_OF) +static const struct of_device_id tvp514x_of_match[] = { + {.compatible = "ti,tvp514x-decoder", }, + {}, +} +MODULE_DEVICE_TABLE(of, tvp514x_of_match); + +static struct tvp514x_platform_data + *tvp514x_get_pdata(struct i2c_client *client) +{ + if (!client->dev.platform_data && client->dev.of_node) { + struct tvp514x_platform_data *pdata; + u32 prop; + + pdata = devm_kzalloc(&client->dev, + sizeof(struct tvp514x_platform_data), + GFP_KERNEL); + client->dev.platform_data = pdata; + if (!pdata) + return NULL; + if (!of_property_read_u32(client->dev.of_node, + "data-active", &prop)) + pdata->clk_polarity = prop; + if (!of_property_read_u32(client->dev.of_node, + "hsync-active", &prop)) + pdata->hs_polarity = prop; + if (!of_property_read_u32(client->dev.of_node, + "vsync-active", &prop)) + pdata->vs_polarity = prop; + + } + + return client->dev.platform_data; +} +#else +#define tvp514x_of_match NULL + +static struct tvp514x_platform_data + *tvp514x_get_pdata(struct i2c_client *client) +{ + return client->dev.platform_data; +} +#endif + /** * tvp514x_probe() - decoder driver i2c probe handler * @client: i2c driver client device structure @@ -941,6 +986,7 @@ static struct tvp514x_decoder tvp514x_dev = { static int tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct tvp514x_platform_data *pdata; struct tvp514x_decoder *decoder; struct v4l2_subdev *sd; int ret; @@ -949,22 +995,25 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; + pdata = tvp514x_get_pdata(client); + if (!pdata) { + v4l2_err(client, "No platform data!!\n"); + return -EPROBE_DEFER; + } + decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL); if (!decoder) return -ENOMEM; /* Initialize the tvp514x_decoder with default configuration */ *decoder = tvp514x_dev; - if (!client->dev.platform_data) { - v4l2_err(client, "No platform data!!\n"); - return -EPROBE_DEFER; - } + /* Copy default register configuration */ memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, sizeof(tvp514x_reg_list_default)); /* Copy board specific information here */ - decoder->pdata = client->dev.platform_data; + decoder->pdata = pdata; /** * Fetch platform specific data, and configure the @@ -1096,6 +1145,7 @@ MODULE_DEVICE_TABLE(i2c, tvp514x_id); static struct i2c_driver tvp514x_driver = { .driver = { + .of_match_table = tvp514x_of_match, .owner = THIS_MODULE, .name = TVP514X_MODULE_NAME, }, -- 1.7.4.1 _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
