Hi Mark,

On Tue, Jan 29, 2013 at 13:08:53, Vishwanathrao Badarkhe, Manish wrote:
> Add device tree data for tps6507x regulator by adding all tps6507x regulator 
> nodes. Regulators are initialized based on compatible name provided in 
> tps6507x DT file.
> 
> All tps6507x PMIC regulator device tree nodes are placed in a separate device 
> tree include file (tps6507x.dtsi).
> tps6507x.dtsi file is created using datasheet 
> http://www.ti.com/lit/ds/symlink/tps65070.pdf
> 
> Tested on da850-evm.
> 
> Signed-off-by: Vishwanathrao Badarkhe, Manish <manish...@ti.com>
> ---
> Changes since V1:
>  - Updated Copyright information.
> 
> :000000 100644 0000000... 4c326e5... A        arch/arm/boot/dts/tps6507x.dtsi
>  arch/arm/boot/dts/tps6507x.dtsi |   47 
> +++++++++++++++++++++++++++++++++++++++
>  1 files changed, 47 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/tps6507x.dtsi 
> b/arch/arm/boot/dts/tps6507x.dtsi new file mode 100644 index 0000000..4c326e5
> --- /dev/null
> +++ b/arch/arm/boot/dts/tps6507x.dtsi
> @@ -0,0 +1,47 @@
> +/*
> + * Copyright (C) 2013 Texas Instruments Incorporated - 
> +http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/*
> + * Integrated Power Management Chip
> + * http://www.ti.com/lit/ds/symlink/tps65070.pdf
> + */
> +
> +&tps {
> +     compatible = "ti,tps6507x";
> +
> +     regulators {
> +             #address-cells = <1>;
> +             #size-cells = <0>;
> +
> +             vdcdc1_reg: regulator@0 {
> +                     reg = <0>;
> +                     regulator-compatible = "VDCDC1";
> +             };
> +
> +             vdcdc2_reg: regulator@1 {
> +                     reg = <1>;
> +                     regulator-compatible = "VDCDC2";
> +             };
> +
> +             vdcdc3_reg: regulator@2 {
> +                     reg = <2>;
> +                     regulator-compatible = "VDCDC3";
> +             };
> +
> +             ldo1_reg: regulator@3 {
> +                     reg = <3>;
> +                     regulator-compatible = "LDO1";
> +             };
> +
> +             ldo2_reg: regulator@4 {
> +                     reg = <4>;
> +                     regulator-compatible = "LDO2";
> +             };
> +
> +     };
> +};
> --
> 1.7.4.1
> 
> 

If there are not any comments on this patch, Could you please 
accept this patch?

Regards, 
Manish
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to