Hi Sekhar, Thanks for the patch!
On Tue, Mar 12, 2013 at 2:44 PM, Sekhar Nori <nsek...@ti.com> wrote: > drivers/media/platform/davinci/Kconfig uses selects where > it should be using 'depends on'. This results in warnings of > the following sort when doing randconfig builds. > > warning: (VIDEO_DM6446_CCDC && VIDEO_DM355_CCDC && VIDEO_ISIF && > VIDEO_DAVINCI_VPBE_DISPLAY) selects VIDEO_VPSS_SYSTEM which has unmet direct > dependencies (MEDIA_SUPPORT && V4L_PLATFORM_DRIVERS && ARCH_DAVINCI) > > The VPIF kconfigs had a strange 'select' and 'depends on' cross > linkage which have been fixed as well by removing unneeded > VIDEO_DAVINCI_VPIF config symbol. > > Similarly, remove the unnecessary VIDEO_VPSS_SYSTEM and > VIDEO_VPFE_CAPTURE. They don't select any independent functionality > and were being used to manage code dependencies which can > be handled using makefile. > > Selecting video modules is now dependent on all ARCH_DAVINCI > instead of specific EVMs and SoCs earlier. This should help build > coverage. Remove unnecessary 'default y' for some config symbols. > > While at it, fix the Kconfig help text to make it more readable > and fix names of modules created during module build. > > Rename VIDEO_ISIF to VIDEO_DM365_ISIF as per suggestion from > Prabhakar. > > This patch has only been build tested; I have tried to not break > any existing assumptions. I do not have the setup to test video, > so any test reports welcome. > The series which I posted yesterday [1] for DM365 VPBE, uses a exported symbol 'vpss_enable_clock' so If I build vpbe as module it complains for following, arch/arm/mach-davinci/built-in.o: In function `dm365_venc_setup_clock': pm_domain.c:(.text+0x302c): undefined reference to `vpss_enable_clock' pm_domain.c:(.text+0x3038): undefined reference to `vpss_enable_clock' pm_domain.c:(.text+0x3060): undefined reference to `vpss_enable_clock' pm_domain.c:(.text+0x306c): undefined reference to `vpss_enable_clock' So how would you suggest to handle this VPSS config ? [1] http://www.mail-archive.com/davinci-linux-open-source@linux.davincidsp.com/msg25443.html Regards, --Prabhakar > Reported-by: Russell King <rmk+ker...@arm.linux.org.uk> > Signed-off-by: Sekhar Nori <nsek...@ti.com> > --- > Since v2, revisited config prompt texts and made them > more meaningful/consistent. > > drivers/media/platform/davinci/Kconfig | 103 > +++++++++++-------------------- > drivers/media/platform/davinci/Makefile | 17 ++--- > 2 files changed, 41 insertions(+), 79 deletions(-) > > diff --git a/drivers/media/platform/davinci/Kconfig > b/drivers/media/platform/davinci/Kconfig > index ccfde4e..c50d31d 100644 > --- a/drivers/media/platform/davinci/Kconfig > +++ b/drivers/media/platform/davinci/Kconfig > @@ -1,79 +1,47 @@ > config VIDEO_DAVINCI_VPIF_DISPLAY > - tristate "DM646x/DA850/OMAPL138 EVM Video Display" > - depends on VIDEO_DEV && (MACH_DAVINCI_DM6467_EVM || > MACH_DAVINCI_DA850_EVM) > + tristate "TI DaVinci VPIF V4L2-Display driver" > + depends on VIDEO_DEV && ARCH_DAVINCI > select VIDEOBUF2_DMA_CONTIG > - select VIDEO_DAVINCI_VPIF > select VIDEO_ADV7343 if MEDIA_SUBDRV_AUTOSELECT > select VIDEO_THS7303 if MEDIA_SUBDRV_AUTOSELECT > help > Enables Davinci VPIF module used for display devices. > - This module is common for following DM6467/DA850/OMAPL138 > - based display devices. > + This module is used for display on TI DM6467/DA850/OMAPL138 > + SoCs. > > - To compile this driver as a module, choose M here: the > - module will be called vpif_display. > + To compile this driver as a module, choose M here. There will > + be two modules called vpif.ko and vpif_display.ko > > config VIDEO_DAVINCI_VPIF_CAPTURE > - tristate "DM646x/DA850/OMAPL138 EVM Video Capture" > - depends on VIDEO_DEV && (MACH_DAVINCI_DM6467_EVM || > MACH_DAVINCI_DA850_EVM) > + tristate "TI DaVinci VPIF video capture driver" > + depends on VIDEO_DEV && ARCH_DAVINCI > select VIDEOBUF2_DMA_CONTIG > - select VIDEO_DAVINCI_VPIF > help > - Enables Davinci VPIF module used for captur devices. > - This module is common for following DM6467/DA850/OMAPL138 > - based capture devices. > + Enables Davinci VPIF module used for capture devices. > + This module is used for capture on TI DM6467/DA850/OMAPL138 > + SoCs. > > - To compile this driver as a module, choose M here: the > - module will be called vpif_capture. > + To compile this driver as a module, choose M here. There will > + be two modules called vpif.ko and vpif_capture.ko > > -config VIDEO_DAVINCI_VPIF > - tristate "DaVinci VPIF Driver" > - depends on VIDEO_DAVINCI_VPIF_DISPLAY || VIDEO_DAVINCI_VPIF_CAPTURE > - help > - Support for DaVinci VPIF Driver. > - > - To compile this driver as a module, choose M here: the > - module will be called vpif. > - > -config VIDEO_VPSS_SYSTEM > - tristate "VPSS System module driver" > - depends on ARCH_DAVINCI > - help > - Support for vpss system module for video driver > - > -config VIDEO_VPFE_CAPTURE > - tristate "VPFE Video Capture Driver" > +config VIDEO_DM6446_CCDC > + tristate "TI DM6446 CCDC video capture driver" > depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3) > - depends on I2C > select VIDEOBUF_DMA_CONTIG > help > - Support for DMx/AMx VPFE based frame grabber. This is the > - common V4L2 module for following DMx/AMx SoCs from Texas > - Instruments:- DM6446, DM365, DM355 & AM3517/05. > - > - To compile this driver as a module, choose M here: the > - module will be called vpfe-capture. > - > -config VIDEO_DM6446_CCDC > - tristate "DM6446 CCDC HW module" > - depends on VIDEO_VPFE_CAPTURE > - select VIDEO_VPSS_SYSTEM > - default y > - help > Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces > with decoder modules such as TVP5146 over BT656 or > sensor module such as MT9T001 over a raw interface. This > module configures the interface and CCDC/ISIF to do > video frame capture from slave decoders. > > - To compile this driver as a module, choose M here: the > - module will be called vpfe. > + To compile this driver as a module, choose M here. There will > + be three modules called vpfe_capture.ko, vpss.ko and dm644x_ccdc.ko > > config VIDEO_DM355_CCDC > - tristate "DM355 CCDC HW module" > - depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE > - select VIDEO_VPSS_SYSTEM > - default y > + tristate "TI DM355 CCDC video capture driver" > + depends on VIDEO_V4L2 && ARCH_DAVINCI > + select VIDEOBUF_DMA_CONTIG > help > Enables DM355 CCD hw module. DM355 CCDC hw interfaces > with decoder modules such as TVP5146 over BT656 or > @@ -81,31 +49,30 @@ config VIDEO_DM355_CCDC > module configures the interface and CCDC/ISIF to do > video frame capture from a slave decoders > > - To compile this driver as a module, choose M here: the > - module will be called vpfe. > + To compile this driver as a module, choose M here. There will > + be three modules called vpfe_capture.ko, vpss.ko and dm355_ccdc.ko > > -config VIDEO_ISIF > - tristate "ISIF HW module" > - depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE > - select VIDEO_VPSS_SYSTEM > - default y > +config VIDEO_DM365_ISIF > + tristate "TI DM365 ISIF video capture driver" > + depends on VIDEO_V4L2 && ARCH_DAVINCI > + select VIDEOBUF_DMA_CONTIG > help > Enables ISIF hw module. This is the hardware module for > - configuring ISIF in VPFE to capture Raw Bayer RGB data from > + configuring ISIF in VPFE to capture Raw Bayer RGB data from > a image sensor or YUV data from a YUV source. > > - To compile this driver as a module, choose M here: the > - module will be called vpfe. > + To compile this driver as a module, choose M here. There will > + be three modules called vpfe_capture.ko, vpss.ko and isif.ko > > config VIDEO_DAVINCI_VPBE_DISPLAY > - tristate "DM644X/DM365/DM355 VPBE HW module" > - depends on ARCH_DAVINCI_DM644x || ARCH_DAVINCI_DM355 || > ARCH_DAVINCI_DM365 > - select VIDEO_VPSS_SYSTEM > + tristate "TI DaVinci VPBE V4L2-Display driver" > + depends on ARCH_DAVINCI > select VIDEOBUF2_DMA_CONTIG > help > Enables Davinci VPBE module used for display devices. > - This module is common for following DM644x/DM365/DM355 > + This module is used for dipslay on TI DM644x/DM365/DM355 > based display devices. > > - To compile this driver as a module, choose M here: the > - module will be called vpbe. > + To compile this driver as a module, choose M here. There will > + be five modules created called vpss.ko, vpbe.ko, vpbe_osd.ko, > + vpbe_venc.ko and vpbe_display.ko > diff --git a/drivers/media/platform/davinci/Makefile > b/drivers/media/platform/davinci/Makefile > index f40f521..d74d9ee 100644 > --- a/drivers/media/platform/davinci/Makefile > +++ b/drivers/media/platform/davinci/Makefile > @@ -2,19 +2,14 @@ > # Makefile for the davinci video device drivers. > # > > -# VPIF > -obj-$(CONFIG_VIDEO_DAVINCI_VPIF) += vpif.o > - > #VPIF Display driver > -obj-$(CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY) += vpif_display.o > +obj-$(CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY) += vpif.o vpif_display.o > #VPIF Capture driver > -obj-$(CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE) += vpif_capture.o > +obj-$(CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE) += vpif.o vpif_capture.o > > # Capture: DM6446 and DM355 > -obj-$(CONFIG_VIDEO_VPSS_SYSTEM) += vpss.o > -obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o > -obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o > -obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o > -obj-$(CONFIG_VIDEO_ISIF) += isif.o > -obj-$(CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY) += vpbe.o vpbe_osd.o \ > +obj-$(CONFIG_VIDEO_DM6446_CCDC) += vpfe_capture.o vpss.o dm644x_ccdc.o > +obj-$(CONFIG_VIDEO_DM355_CCDC) += vpfe_capture.o vpss.o dm355_ccdc.o > +obj-$(CONFIG_VIDEO_DM365_ISIF) += vpfe_capture.o vpss.o isif.o > +obj-$(CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY) += vpss.o vpbe.o vpbe_osd.o \ > vpbe_venc.o vpbe_display.o > -- > 1.7.10.1 > > _______________________________________________ > Davinci-linux-open-source mailing list > Davinci-linux-open-source@linux.davincidsp.com > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source