> diff --git a/drivers/i2c/busses/i2c-davinci.c 
> b/drivers/i2c/busses/i2c-davinci.c
> index af0b583..254d897 100644
> --- a/drivers/i2c/busses/i2c-davinci.c
> +++ b/drivers/i2c/busses/i2c-davinci.c
> @@ -372,9 +372,9 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct 
> i2c_msg *msg, int stop)
>               flag |= DAVINCI_I2C_MDR_STP;
>       davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
>  
> -     r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
> +     r = wait_for_completion_timeout(&dev->cmd_complete,
>                                                     dev->adapter.timeout);
> -     if (r == 0) {
> +     if (unlikely(r == 0)) {

Not really needed, but well yeah...

>               dev_err(dev->dev, "controller timed out\n");
>               davinci_i2c_recover_bus(dev);
>               i2c_davinci_init(dev);
> @@ -384,7 +384,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct 
> i2c_msg *msg, int stop)
>       if (dev->buf_len) {
>               /* This should be 0 if all bytes were transferred
>                * or dev->cmd_err denotes an error.
> -              * A signal may have aborted the transfer.
>                */
>               if (r >= 0) {
>                       dev_err(dev->dev, "abnormal termination buf_len=%i\n",
> @@ -436,22 +435,24 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct 
> i2c_msg msgs[], int num)
>       ret = i2c_davinci_wait_bus_not_busy(dev, 1);
>       if (ret < 0) {
>               dev_warn(dev->dev, "timeout waiting for bus ready\n");
> -             return ret;
> +             goto error;

You are fixing the error path here to include the completion? This is a
seperate patch IMO.

>       }
>  
>       for (i = 0; i < num; i++) {
>               ret = i2c_davinci_xfer_msg(adap, &msgs[i], (i == (num - 1)));
> -             dev_dbg(dev->dev, "%s [%d/%d] ret: %d\n", __func__, i + 1, num,
> -                     ret);
> +             dev_dbg(dev->dev, "%s [%d/%d] %#x ret: %d\n", __func__, i + 1,
> +                             num, msgs[i].addr, ret);

No need for this change. We have other debug output/tracing already. But
no need to clean up either.

>               if (ret < 0)
> -                     return ret;
> +                     goto error;
>       }
> +     ret = num;
>  
> +error:
>  #ifdef CONFIG_CPU_FREQ
>       complete(&dev->xfr_complete);
>  #endif
>  
> -     return num;
> +     return ret;

Thanks,

   Wolfram

Attachment: signature.asc
Description: Digital signature

_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to