Where did this go? Any resolution? There is Something about the Dynaloader
for 5.00503 from memory. I'd suggest rebuilding for 5.6.1.

Neil

> -----Original Message-----
> From: Paul Scott [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, April 26, 2001 11:03 PM
> To: [EMAIL PROTECTED]
> Subject: Problem installing DBI 1.15 on AIX 4.3 (Perl 5.0005_03)
> 
> 
> Hi all,
> 
> I am having great difficulty in getting DBI installed on an 
> AIX 4.3 box. 
> Basically the Makefile.PL works great, Makefile works fine, 
> but make test 
> returns a load of "No such file or directory errors." from 
> DynaLoader.PM.
> 
> Details below - errors in the make test section
> 
> Can anyone help me out with this?
> 
> Many Thanks
> 
> Paul
> 
> /home/scottp/perl/DBI-1.15 465$ perl -v
> 
> This is perl, version 5.005_03 built for aix
> 
> Copyright 1987-1999, Larry Wall
> 
> Perl may be copied only under the terms of either the 
> Artistic License or 
> the
> GNU General Public License, which may be found in the Perl 
> 5.0 source kit.
> 
> Complete documentation for Perl, including FAQ lists, should 
> be found on
> this system using `man perl' or `perldoc perl'.  If you have 
> access to the
> Internet, point your browser at http://www.perl.com/, the 
> Perl Home Page.
> 
> /home/scottp/perl/DBI-1.15 466$
> 
> 
> 
> 
> /home/scottp/perl/DBI-1.15 458$ perl Makefile.PL
> *** Note:
>     The optional PlRPC-modules (RPC::PlServer etc) are not installed.
>     If you want to use the DBD::Proxy driver and DBI::ProxyServer
>     modules, then you'll need to install the RPC::PlServer, 
> RPC::PlClient,
>     Storable and Net::Daemon modules. The CPAN Bundle::DBI 
> may help you.
>     You can install them any time after installing the DBI.
>     You do *not* need these modules for typical DBI usage.
> 
> Optional modules are available from any CPAN mirror, in particular
>     http://www.perl.com/CPAN/modules/by-module
>     http://www.perl.org/CPAN/modules/by-module
>     ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
> 
> Checking if your kit is complete...
> Looks good
> Writing Makefile for DBI
> 
>     Remember to actually *read* the README file!
>     Use  'make' to build the software (dmake or nmake on Windows).
>     Then 'make test' to execute self tests.
>     Then 'make install' to install the DBI and then delete 
> this working
>     directory before unpacking and building any DBD::* drivers.
> 
> /home/scottp/perl/DBI-1.15 459$
> 
> 
> 
> /home/scottp/perl/DBI-1.15 461$ make
> mkdir blib
> mkdir blib/lib
> cp lib/DBI/W32ODBC.pm blib/lib/DBI/W32ODBC.pm
> cp lib/DBD/ExampleP.pm blib/lib/DBD/ExampleP.pm
> cp lib/DBI/Shell.pm blib/lib/DBI/Shell.pm
> cp lib/DBI/FAQ.pm blib/lib/DBI/FAQ.pm
> cp lib/DBI/ProxyServer.pm blib/lib/DBI/ProxyServer.pm
> cp lib/Bundle/DBI.pm blib/lib/Bundle/DBI.pm
> cp lib/DBD/Proxy.pm blib/lib/DBD/Proxy.pm
> cp lib/DBD/Multiplex.pm blib/lib/DBD/Multiplex.pm
> cp DBIXS.h blib/arch/auto/DBI/DBIXS.h
> cp dbd_xsh.h blib/arch/auto/DBI/dbd_xsh.h
> cp dbi_sql.h blib/arch/auto/DBI/dbi_sql.h
> cp lib/DBD/NullP.pm blib/lib/DBD/NullP.pm
> cp lib/DBD/Sponge.pm blib/lib/DBD/Sponge.pm
> cp lib/DBI/Format.pm blib/lib/DBI/Format.pm
> cp Driver.xst blib/arch/auto/DBI/Driver.xst
> cp lib/DBI/DBD.pm blib/lib/DBI/DBD.pm
> cp lib/Win32/DBIODBC.pm blib/lib/Win32/DBIODBC.pm
> cp DBI.pm blib/lib/DBI.pm
> cp dbipport.h blib/arch/auto/DBI/dbipport.h
> cp lib/DBD/ADO.pm blib/lib/DBD/ADO.pm
>         /usr/bin/perl "-I/usr/opt/perl5/lib/5.00503/aix" 
> "-I/usr/opt/perl5/lib/5.00503" -e 'use ExtUtils::Mksymlists;  
> Mksymlists("NAME" => "DBI", "DL_FUNCS" => {  }, "FUNCLIST" => 
> [], "DL_VARS" 
> => []);'
>         /usr/bin/perl -p -e "s/~DRIVER~/Perl/g" < 
> blib/arch/auto/DBI/Driver.xst > Perl.xsi
>         /usr/bin/perl -I/usr/opt/perl5/lib/5.00503/aix 
> -I/usr/opt/perl5/lib/5.00503 
> /usr/opt/perl5/lib/5.00503/ExtUtils/xsubpp  
> -typemap /usr/opt/perl5/lib/5.00503/ExtUtils/typemap Perl.xs 
> >xstmp.c && mv 
> xstmp.c Perl.c
>         gcc -c  -D_ALL_SOURCE -D_ANSI_C_SOURCE 
> -D_POSIX_SOURCE  -O     
> -DVERSION=\"1.15\"  -DXS_VERSION=\"1.15\"  
> -I/usr/opt/perl5/lib/5.00503/aix/CORE -DDBI_NO_THREADS Perl.c
>         /usr/bin/perl -I/usr/opt/perl5/lib/5.00503/aix 
> -I/usr/opt/perl5/lib/5.00503 
> /usr/opt/perl5/lib/5.00503/ExtUtils/xsubpp  
> -typemap /usr/opt/perl5/lib/5.00503/ExtUtils/typemap DBI.xs 
> >xstmp.c && mv 
> xstmp.c DBI.c
>         gcc -c  -D_ALL_SOURCE -D_ANSI_C_SOURCE 
> -D_POSIX_SOURCE  -O     
> -DVERSION=\"1.15\"  -DXS_VERSION=\"1.15\"  
> -I/usr/opt/perl5/lib/5.00503/aix/CORE -DDBI_NO_THREADS DBI.c
> Running Mkbootstrap for DBI ()
>         chmod 644 DBI.bs
>         LD_RUN_PATH="" ld -o blib/arch/auto/DBI/DBI.so  
> -bhalt:4 -bM:SRE 
> -bI:/usr/opt/perl5/lib/5.00503/aix/CORE/perl.exp -bE:DBI.exp 
> -b noentry -lc 
> DBI.o
>         chmod 755 blib/arch/auto/DBI/DBI.so
>         cp DBI.bs blib/arch/auto/DBI/DBI.bs
>         chmod 644 blib/arch/auto/DBI/DBI.bs
> mkdir blib/lib/auto/DBI
>         /usr/bin/perl -Iblib/arch -Iblib/lib 
> -I/usr/opt/perl5/lib/5.00503/aix -I/usr/opt/perl5/lib/5.00503 
> dbiproxy.PL 
> dbiproxy
> Extracted dbiproxy from dbiproxy.PL with variable substitutions.
> mkdir blib/script
>         cp dbiproxy blib/script/dbiproxy
>         /usr/bin/perl -I/usr/opt/perl5/lib/5.00503/aix 
> -I/usr/opt/perl5/lib/5.00503 -MExtUtils::MakeMaker  -e 
> "MY->fixin(shift)" 
> blib/script/dbiproxy
>         /usr/bin/perl -Iblib/arch -Iblib/lib 
> -I/usr/opt/perl5/lib/5.00503/aix -I/usr/opt/perl5/lib/5.00503 
> dbish.PL dbish
> Extracted dbish from dbish.PL with variable substitutions.
>         cp dbish blib/script/dbish
>         /usr/bin/perl -I/usr/opt/perl5/lib/5.00503/aix 
> -I/usr/opt/perl5/lib/5.00503 -MExtUtils::MakeMaker  -e 
> "MY->fixin(shift)" 
> blib/script/dbish
> Target "makemakerdflt" is up to date.
> /home/scottp/perl/DBI-1.15 462$
> 
> 
> 
> 
> /home/scottp/perl/DBI-1.15 463$ make test
>         PERL_DL_NONLAZY=1 /usr/bin/perl -Iblib/arch -Iblib/lib 
> -I/usr/opt/perl5/lib/5.00503/aix -I/usr/opt/perl5/lib/5.00503 -e 'use 
> Test::Harness qw(&runtests $verbose); $verbose=0; runtests 
> @ARGV;' t/*.t
> t/basics............Can't load 'blib/arch/auto/DBI/DBI.so' 
> for module DBI: 
> dlopen: blib/arch/auto/DBI/DBI.so: A file or directory in the 
> path name does 
> not exist. at /usr/opt/perl5/lib/5.00503/aix/DynaLoader.pm line 169.
> 
> at blib/lib/DBI.pm line 180
> BEGIN failed--compilation aborted at blib/lib/DBI.pm line 180.
> BEGIN failed--compilation aborted at t/basics.t line 17.
> dubious
>         Test returned status 2 (wstat 512, 0x200)
> t/dbidrv............Can't load 'blib/arch/auto/DBI/DBI.so' 
> for module DBI: 
> dlopen: blib/arch/auto/DBI/DBI.so: A file or directory in the 
> path name does 
> not exist. at /usr/opt/perl5/lib/5.00503/aix/DynaLoader.pm line 169.
> 
> at blib/lib/DBI.pm line 180
> BEGIN failed--compilation aborted at blib/lib/DBI.pm line 180.
> BEGIN failed--compilation aborted at t/dbidrv.t line 2.
> dubious
>         Test returned status 2 (wstat 512, 0x200)
> t/examp.............Can't load 'blib/arch/auto/DBI/DBI.so' 
> for module DBI: 
> dlopen: blib/arch/auto/DBI/DBI.so: A file or directory in the 
> path name does 
> not exist. at /usr/opt/perl5/lib/5.00503/aix/DynaLoader.pm line 169.
> 
> at blib/lib/DBI.pm line 180
> BEGIN failed--compilation aborted at blib/lib/DBI.pm line 180.
> BEGIN failed--compilation aborted at t/examp.t line 4.
> dubious
>         Test returned status 2 (wstat 512, 0x200)
> t/meta..............Can't load 'blib/arch/auto/DBI/DBI.so' 
> for module DBI: 
> dlopen: blib/arch/auto/DBI/DBI.so: A file or directory in the 
> path name does 
> not exist. at /usr/opt/perl5/lib/5.00503/aix/DynaLoader.pm line 169.
> 
> at blib/lib/DBI.pm line 180
> BEGIN failed--compilation aborted at blib/lib/DBI.pm line 180.
> BEGIN failed--compilation aborted at t/meta.t line 17.
> dubious
>         Test returned status 2 (wstat 512, 0x200)
> t/proxy.............Can't load 'blib/arch/auto/DBI/DBI.so' 
> for module DBI: 
> dlopen: blib/arch/auto/DBI/DBI.so: A file or directory in the 
> path name does 
> not exist. at /usr/opt/perl5/lib/5.00503/aix/DynaLoader.pm line 169.
> 
> at blib/lib/DBI.pm line 180
> BEGIN failed--compilation aborted at blib/lib/DBI.pm line 180.
> dubious
>         Test returned status 2 (wstat 512, 0x200)
> t/shell.............Can't load 'blib/arch/auto/DBI/DBI.so' 
> for module DBI: 
> dlopen: blib/arch/auto/DBI/DBI.so: A file or directory in the 
> path name does 
> not exist. at /usr/opt/perl5/lib/5.00503/aix/DynaLoader.pm line 169.
> 
> at blib/lib/DBI.pm line 180
> BEGIN failed--compilation aborted at blib/lib/DBI.pm line 180.
> BEGIN failed--compilation aborted at blib/lib/DBI/Shell.pm line 74.
> BEGIN failed--compilation aborted at t/shell.t line 29.
> dubious
>         Test returned status 2 (wstat 512, 0x200)
> t/subclass..........Can't load 'blib/arch/auto/DBI/DBI.so' 
> for module DBI: 
> dlopen: blib/arch/auto/DBI/DBI.so: A file or directory in the 
> path name does 
> not exist. at /usr/opt/perl5/lib/5.00503/aix/DynaLoader.pm line 169.
> 
> at blib/lib/DBI.pm line 180
> BEGIN failed--compilation aborted at blib/lib/DBI.pm line 180.
> BEGIN failed--compilation aborted at t/subclass.t line 63.
> dubious
>         Test returned status 2 (wstat 512, 0x200)
> FAILED--7 test scripts could be run, alas--no output ever seen
> make: 1254-004 The error code from the last command is 2.
> ______________________________________________________________
> ___________
> Get Your Private, Free E-mail from MSN Hotmail at 
http://www.hotmail.com.

__________________________________________________________________________
Please Note :
Only  the intended recipient is authorised to access or use this e-mail.  If
you are not the intended recipient,
please delete this e-mail and notify the sender immediately.   The contents
of this e-mail are the writer's 
opinion and are not necessarily endorsed by the Gunz Companies unless
expressly stated.

We use virus scanning software but exclude all liability for viruses or
similar in any attachment.


Reply via email to