I am trying to install Bundle::DBI to an Ultra 250 with Solaris 7. I
installed a fresh copy of Perl 5.6.1 from the Sun Freeware package.
I've enclosed a text file with a capture of my attempted install. I hope
someone can help. :)
Not sure if this is some sort of mailing list so please reply by mail if you
have any ideas. Thanks!
<<DBI Errors.txt>>
bash-2.05# uname -a
SunOS sd-play-01 5.7 Generic_106541-17 sun4u sparc SUNW,Ultra-250
bash-2.05# perl -MCPAN -e 'install Bundle::DBI'
/usr/local/lib/perl5/5.6.1/CPAN/Config.pm initialized.
CPAN is the world-wide archive of perl resources. It consists of about
100 sites that all replicate the same contents all around the globe.
Many countries have at least one CPAN site already. The resources
found on CPAN are easily accessible with the CPAN.pm module. If you
want to use CPAN.pm, you have to configure it properly.
If you do not want to enter a dialog now, you can answer 'no' to this
question and I'll try to autoconfigure. (Note: you can revisit this
dialog anytime later by typing 'o conf init' at the cpan prompt.)
Are you ready for manual configuration? [yes]
The following questions are intended to help you with the
configuration. The CPAN module needs a directory of its own to cache
important index files and maybe keep a temporary mirror of CPAN files.
This may be a site-wide directory or a personal directory.
First of all, I'd like to create this directory. Where?
CPAN build and cache directory? [/.cpan]
If you want, I can keep the source files after a build in the cpan
home directory. If you choose so then future builds will take the
files from there. If you don't want to keep them, answer 0 to the
next question.
How big should the disk cache be for keeping the build directories
with all the intermediate files?
Cache size for build directory (in MB)? [10]
By default, each time the CPAN module is started, cache scanning
is performed to keep the cache size in sync. To prevent from this,
disable the cache scanning with 'never'.
Perform cache scanning (atstart or never)? [atstart]
To considerably speed up the initial CPAN shell startup, it is
possible to use Storable to create a cache of metadata. If Storable
is not available, the normal index mechanism will be used.
Cache metadata (yes/no)? [yes]
The next option deals with the charset your terminal supports. In
general CPAN is English speaking territory, thus the charset does not
matter much, but some of the aliens out there who upload their
software to CPAN bear names that are outside the ASCII range. If your
terminal supports UTF-8, you say no to the next question, if it
supports ISO-8859-1 (also known as LATIN1) then you say yes, and if it
supports neither nor, your answer does not matter, you will not be
able to read the names of some authors anyway. If you answer no, names
will be output in UTF-8.
Your terminal expects ISO-8859-1 (yes/no)? [yes]
The CPAN module can detect when a module that which you are trying to
build depends on prerequisites. If this happens, it can build the
prerequisites for you automatically ('follow'), ask you for
confirmation ('ask'), or just ignore them ('ignore'). Please set your
policy to one of the three values.
Policy on building prerequisites (follow, ask or ignore)? [ask]
The CPAN module will need a few external programs to work properly.
Please correct me, if I guess the wrong path for a program. Don't
panic if you do not have some of them, just press ENTER for those. To
disable the use of a download program, you can type a space followed
by ENTER.
Where is your gzip program? [/usr/local/bin/gzip] /usr/local/bin/gzip
Where is your tar program? [/bin/tar] /usr/bin/tar
Where is your unzip program? [/bin/unzip] /usr/bin/unzip
Where is your make program? [/bin/make] /usr/local/bin/make
Warning: lynx not found in PATH
Where is your lynx program? []
Warning: wget not found in PATH
Where is your wget program? [] /usr/local/bin/wget
Warning: ncftpget not found in PATH
Where is your ncftpget program? []
Warning: ncftp not found in PATH
Where is your ncftp program? []
Where is your ftp program? [/bin/ftp] /usr/bin/ftp
What is your favorite pager program? [/bin/more] /usr/bin/more
What is your favorite shell? [/sbin/sh] /usr/local/bin/bash
Every Makefile.PL is run by perl in a separate process. Likewise we
run 'make' and 'make install' in processes. If you have any
parameters (e.g. PREFIX, LIB, UNINST or the like) you want to pass
to the calls, please specify them here.
If you don't understand this question, just press ENTER.
Parameters for the 'perl Makefile.PL' command?
Typical frequently used settings:
POLLUTE=1 increasing backwards compatibility
LIB=~/perl non-root users (please see manual for more hints)
Your choice: []
Parameters for the 'make' command?
Typical frequently used setting:
-j3 dual processor system
Your choice: []
Parameters for the 'make install' command?
Typical frequently used setting:
UNINST=1 to always uninstall potentially conflicting files
Your choice: []
Sometimes you may wish to leave the processes run by CPAN alone
without caring about them. As sometimes the Makefile.PL contains
question you're expected to answer, you can set a timer that will
kill a 'perl Makefile.PL' process after the specified time in seconds.
If you set this value to 0, these processes will wait forever. This is
the default and recommended setting.
Timeout for inactivity during Makefile.PL? [0]
If you're accessing the net via proxies, you can specify them in the
CPAN configuration or via environment variables. The variable in
the $CPAN::Config takes precedence.
Your ftp_proxy?
Your http_proxy?
Your no_proxy?
You have no /.cpan/sources/MIRRORED.BY
I'm trying to fetch one
LWP not available
Please, install Net::FTP as soon as possible. CPAN.pm installs it for you
if you just type
install Bundle::libnet
Trying with "/usr/local/bin/wget -O -" to get
ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY
--21:15:22-- ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY
=> `-'
Connecting to ftp.perl.org:21... connected!
Logging in as anonymous ... Logged in!
==> SYST ...
Server error, can't determine system type.
done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /pub/CPAN ... done.
==> PORT ... done. ==> RETR MIRRORED.BY ... done.
Length: 100,894 (unauthoritative)
0K .......... .......... .......... .......... .......... 50% @ 72.25 KB/s
50K .......... .......... .......... .......... ........ 100% @ 98.64 KB/s
21:15:24 (83.22 KB/s) - `-' saved [100894]
Now we need to know where your favorite CPAN sites are located. Push
a few sites onto the array (just in case the first on the array won't
work). If you are mirroring CPAN to your local workstation, specify a
file: URL.
First, pick a nearby continent and country (you can pick several of
each, separated by spaces, or none if you just want to keep your
existing selections). Then, you will be presented with a list of URLs
of CPAN mirrors in the countries you selected, along with previously
selected URLs. Select some of those URLs, or just keep the old list.
Finally, you will be prompted for any extra URLs -- file:, ftp:, or
http: -- that host a CPAN mirror.
(1) Africa
(2) Asia
(3) Central America
(4) Europe
(5) North America
(6) Oceania
(7) South America
Select your continent (or several nearby continents) [] 5
(1) Canada
(2) Mexico
(3) United States
Select your country (or several nearby countries) [] 3
(1) ftp://archive.progeny.com/CPAN/
(2) ftp://carroll.cac.psu.edu/pub/CPAN/
(3) ftp://cpan.cse.msu.edu/
(4) ftp://cpan.in-span.net/
(5) ftp://cpan.llarian.net/pub/CPAN/
(6) ftp://cpan.nas.nasa.gov/pub/perl/CPAN/
(7) ftp://cpan.nitco.com/pub/CPAN/
(8) ftp://cpan.uky.edu/pub/CPAN/
(9) ftp://cpan.valueclick.com/pub/CPAN/
(10) ftp://csociety-ftp.ecn.purdue.edu/pub/CPAN
(11) ftp://ftp-mirror.internap.com/pub/CPAN/
(12) ftp://ftp.ccs.neu.edu/net/mirrors/ftp.funet.fi/pub/languages/perl/CPAN/
(13) ftp://ftp.cise.ufl.edu/pub/perl/CPAN/
(14) ftp://ftp.cpanel.net/pub/CPAN/
(15) ftp://ftp.cs.colorado.edu/pub/perl/CPAN/
(16) ftp://ftp.dc.us.telia.net/pub/cpan/
(17) ftp://ftp.digital.com/pub/plan/perl/CPAN/
(18) ftp://ftp.duke.edu/pub/perl/
(19) ftp://ftp.epix.net/pub/languages/perl/
(20) ftp://ftp.freesoftware.com/pub/perl/CPAN/
(21) ftp://ftp.iguide.com/pub/mirrors/packages/perl/CPAN/
(22) ftp://ftp.kernel.org/pub/CPAN/
(23) ftp://ftp.loaded.net/pub/CPAN/
(24) ftp://ftp.mirrorcentral.com/pub/CPAN/
(25) ftp://ftp.orst.edu/pub/CPAN
(26) ftp://ftp.ou.edu/mirrors/CPAN/
(27) ftp://ftp.rge.com/pub/languages/perl/
(28) ftp://ftp.stealth.net/pub/CPAN/
(29) ftp://ftp.sunsite.utk.edu/pub/CPAN/
(30) ftp://ftp.uwsg.indiana.edu/pub/perl/CPAN/
(31) ftp://linuxjar.com/pub/CPAN
(32) ftp://mirror.csit.fsu.edu/pub/CPAN/
(33) ftp://mirror.hiwaay.net/CPAN/
(34) ftp://mirror.xmission.com/CPAN/
(35) ftp://mirrors.cloud9.net/pub/mirrors/CPAN/
(36) ftp://mirrors.netnumina.com/cpan/
(37) ftp://mirrors.rcn.net/pub/lang/CPAN/
(38) ftp://ruff.cs.jmu.edu/pub/CPAN/
(39) ftp://uiarchive.uiuc.edu/mirrors/ftp/ftp.cpan.org/pub/CPAN/
Select as many URLs as you like,
put them on one line, separated by blanks [] 34
Enter another URL or RETURN to quit: []
New set of picks:
ftp://mirror.xmission.com/CPAN/
WAIT support is available as a Plugin. You need the CPAN::WAIT module
to actually use it. But we need to know your favorite WAIT server. If
you don't know a WAIT server near you, just press ENTER.
Your favorite WAIT server?
[wait://ls6.informatik.uni-dortmund.de:1404]
commit: wrote /usr/local/lib/perl5/5.6.1/CPAN/Config.pm
Trying with "/usr/local/bin/wget -O -" to get
ftp://mirror.xmission.com/CPAN/authors/01mailrc.txt.gz
--21:15:42-- ftp://mirror.xmission.com/CPAN/authors/01mailrc.txt.gz
=> `-'
Connecting to mirror.xmission.com:21... connected!
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /CPAN/authors ... done.
==> PORT ... done. ==> RETR 01mailrc.txt.gz ... done.
Length: 38,091 (unauthoritative)
0K .......... .......... .......... ....... 100% @ 66.31 KB/s
21:15:54 (66.19 KB/s) - `-' saved [38091]
Going to read /.cpan/sources/authors/01mailrc.txt.gz
Trying with "/usr/local/bin/wget -O -" to get
ftp://mirror.xmission.com/CPAN/modules/02packages.details.txt.gz
--21:15:55-- ftp://mirror.xmission.com/CPAN/modules/02packages.details.txt.gz
=> `-'
Connecting to mirror.xmission.com:21... connected!
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /CPAN/modules ... done.
==> PORT ... done. ==> RETR 02packages.details.txt.gz ... done.
Length: 108,174 (unauthoritative)
0K .......... .......... .......... .......... .......... 47% @ 87.57 KB/s
50K .......... .......... .......... .......... .......... 94% @ 91.91 KB/s
100K ..... 100% @ 5.51 MB/s
21:16:07 (94.57 KB/s) - `-' saved [108174]
Going to read /.cpan/sources/modules/02packages.details.txt.gz
Database was generated on Wed, 29 Aug 2001 18:59:36 GMT
HTTP::Date not available
Trying with "/usr/local/bin/wget -O -" to get
ftp://mirror.xmission.com/CPAN/modules/03modlist.data.gz
--21:16:15-- ftp://mirror.xmission.com/CPAN/modules/03modlist.data.gz
=> `-'
Connecting to mirror.xmission.com:21... connected!
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /CPAN/modules ... done.
==> PORT ... done. ==> RETR 03modlist.data.gz ... done.
Length: 61,979 (unauthoritative)
0K .......... .......... .......... .......... .......... 82% @ 96.71 KB/s
50K .......... 100% @ 70.18 KB/s
21:16:26 (90.61 KB/s) - `-' saved [61979]
Going to read /.cpan/sources/modules/03modlist.data.gz
Trying with "/usr/local/bin/wget -O -" to get
ftp://mirror.xmission.com/CPAN/authors/id/T/TI/TIMB/DBI-1.20.tar.gz
--21:16:30-- ftp://mirror.xmission.com/CPAN/authors/id/T/TI/TIMB/DBI-1.20.tar.gz
=> `-'
Connecting to mirror.xmission.com:21... connected!
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /CPAN/authors/id/T/TI/TIMB ... done.
==> PORT ... done. ==> RETR DBI-1.20.tar.gz ... done.
Length: 191,676 (unauthoritative)
0K .......... .......... .......... .......... .......... 26% @ 95.42 KB/s
50K .......... .......... .......... .......... .......... 53% @ 75.53 KB/s
100K .......... .......... .......... .......... .......... 80% @ 95.79 KB/s
150K .......... .......... .......... ....... 100% @ 102.72 KB/s
21:16:42 (90.43 KB/s) - `-' saved [191676]
CPAN: MD5 security checks disabled because MD5 not installed.
Please consider installing the MD5 module.
Scanning cache /.cpan/build for sizes
x DBI-1.20, 0 bytes, 0 tape blocks
x DBI-1.20/DBI.xs, 91378 bytes, 179 tape blocks
x DBI-1.20/lib, 0 bytes, 0 tape blocks
x DBI-1.20/lib/DBD, 0 bytes, 0 tape blocks
x DBI-1.20/lib/DBD/NullP.pm, 2933 bytes, 6 tape blocks
x DBI-1.20/lib/DBD/Sponge.pm, 4198 bytes, 9 tape blocks
x DBI-1.20/lib/DBD/ExampleP.pm, 9261 bytes, 19 tape blocks
x DBI-1.20/lib/DBD/Proxy.pm, 21214 bytes, 42 tape blocks
x DBI-1.20/lib/DBI, 0 bytes, 0 tape blocks
x DBI-1.20/lib/DBI/FAQ.pm, 36024 bytes, 71 tape blocks
x DBI-1.20/lib/DBI/W32ODBC.pm, 4594 bytes, 9 tape blocks
x DBI-1.20/lib/DBI/DBD.pm, 58274 bytes, 114 tape blocks
x DBI-1.20/lib/DBI/Format.pm, 11510 bytes, 23 tape blocks
x DBI-1.20/lib/DBI/Shell.pm, 29171 bytes, 57 tape blocks
x DBI-1.20/lib/DBI/ProxyServer.pm, 17169 bytes, 34 tape blocks
x DBI-1.20/lib/Bundle, 0 bytes, 0 tape blocks
x DBI-1.20/lib/Bundle/DBI.pm, 1205 bytes, 3 tape blocks
x DBI-1.20/lib/Win32, 0 bytes, 0 tape blocks
x DBI-1.20/lib/Win32/DBIODBC.pm, 4532 bytes, 9 tape blocks
x DBI-1.20/MANIFEST, 1714 bytes, 4 tape blocks
x DBI-1.20/dbipport.h, 7795 bytes, 16 tape blocks
x DBI-1.20/Changes, 36841 bytes, 72 tape blocks
x DBI-1.20/t, 0 bytes, 0 tape blocks
x DBI-1.20/t/proxy.t, 10282 bytes, 21 tape blocks
x DBI-1.20/t/examp.t, 13552 bytes, 27 tape blocks
x DBI-1.20/t/basics.t, 1919 bytes, 4 tape blocks
x DBI-1.20/t/shell.t, 632 bytes, 2 tape blocks
x DBI-1.20/t/subclass.t, 1609 bytes, 4 tape blocks
x DBI-1.20/t/preparse.t, 1489 bytes, 3 tape blocks
x DBI-1.20/t/dbidrv.t, 1810 bytes, 4 tape blocks
x DBI-1.20/t/meta.t, 996 bytes, 2 tape blocks
x DBI-1.20/dbish.PL, 741 bytes, 2 tape blocks
x DBI-1.20/dbi_sql.h, 1570 bytes, 4 tape blocks
x DBI-1.20/Perl.xs, 394 bytes, 1 tape blocks
x DBI-1.20/Driver.xst, 12098 bytes, 24 tape blocks
x DBI-1.20/README, 4966 bytes, 10 tape blocks
x DBI-1.20/DBIXS.h, 17237 bytes, 34 tape blocks
x DBI-1.20/test.pl, 3887 bytes, 8 tape blocks
x DBI-1.20/dbd_xsh.h, 2050 bytes, 5 tape blocks
x DBI-1.20/Makefile.PL, 6832 bytes, 14 tape blocks
x DBI-1.20/DBI.pm, 158339 bytes, 310 tape blocks
x DBI-1.20/dbiproxy.PL, 5578 bytes, 11 tape blocks
x DBI-1.20/ToDo, 8216 bytes, 17 tape blocks
Running install for module Storable
Running make for R/RA/RAM/Storable-1.0.13.tar.gz
Trying with "/usr/local/bin/wget -O -" to get
ftp://mirror.xmission.com/CPAN/authors/id/R/RA/RAM/Storable-1.0.13.tar.gz
--21:16:46-- ftp://mirror.xmission.com/CPAN/authors/id/R/RA/RAM/Storable-1.0.13.tar.gz
=> `-'
Connecting to mirror.xmission.com:21... connected!
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /CPAN/authors/id/R/RA/RAM ... done.
==> PORT ... done. ==> RETR Storable-1.0.13.tar.gz ... done.
Length: 64,235 (unauthoritative)
0K .......... .......... .......... .......... .......... 79% @ 93.81 KB/s
50K .......... .. 100% @ 84.30 KB/s
21:16:58 (91.58 KB/s) - `-' saved [64235]
CPAN: MD5 security checks disabled because MD5 not installed.
Please consider installing the MD5 module.
x Storable-1.0.13, 0 bytes, 0 tape blocks
x Storable-1.0.13/ChangeLog, 17803 bytes, 35 tape blocks
x Storable-1.0.13/MANIFEST, 1259 bytes, 3 tape blocks
x Storable-1.0.13/Makefile.PL, 669 bytes, 2 tape blocks
x Storable-1.0.13/README, 3108 bytes, 7 tape blocks
x Storable-1.0.13/Storable.pm, 25651 bytes, 51 tape blocks
x Storable-1.0.13/Storable.xs, 128988 bytes, 252 tape blocks
x Storable-1.0.13/t, 0 bytes, 0 tape blocks
x Storable-1.0.13/t/blessed.t, 1933 bytes, 4 tape blocks
x Storable-1.0.13/t/canonical.t, 3517 bytes, 7 tape blocks
x Storable-1.0.13/t/compat-0.6.t, 3286 bytes, 7 tape blocks
x Storable-1.0.13/t/dclone.t, 1465 bytes, 3 tape blocks
x Storable-1.0.13/t/dump.pl, 3646 bytes, 8 tape blocks
x Storable-1.0.13/t/forgive.t, 1516 bytes, 3 tape blocks
x Storable-1.0.13/t/freeze.t, 2671 bytes, 6 tape blocks
x Storable-1.0.13/t/lock.t, 1195 bytes, 3 tape blocks
x Storable-1.0.13/t/overload.t, 1467 bytes, 3 tape blocks
x Storable-1.0.13/t/recurse.t, 5547 bytes, 11 tape blocks
x Storable-1.0.13/t/retrieve.t, 1602 bytes, 4 tape blocks
x Storable-1.0.13/t/store.t, 2205 bytes, 5 tape blocks
x Storable-1.0.13/t/tied.t, 3737 bytes, 8 tape blocks
x Storable-1.0.13/t/tied_hook.t, 4666 bytes, 10 tape blocks
x Storable-1.0.13/t/tied_items.t, 1019 bytes, 2 tape blocks
x Storable-1.0.13/t/utf8.t, 584 bytes, 2 tape blocks
CPAN.pm: Going to build R/RA/RAM/Storable-1.0.13.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for Storable
cp Storable.pm blib/lib/Storable.pm
AutoSplitting blib/lib/Storable.pm (blib/lib/auto/Storable)
/usr/local/bin/perl -I/usr/local/lib/perl5/5.6.1/sun4-solaris
-I/usr/local/lib/perl5/5.6.1 /usr/local/lib/perl5/5.6.1/ExtUtils/xsubpp -typemap
/usr/local/lib/perl5/5.6.1/ExtUtils/typemap Storable.xs > Storable.xsc && mv
Storable.xsc Storable.c
gcc -c -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -O -DVERSION=\"1.013\" -DXS_VERSION=\"1.013\" -fPIC
-I/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE Storable.c
cc1: Invalid option `-fno-strict-aliasing'
make: *** [Storable.o] Error 1
/usr/local/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
Net::Daemon is up to date.
Running install for module RPC::PlServer
Running make for J/JW/JWIED/PlRPC-0.2015.tar.gz
Trying with "/usr/local/bin/wget -O -" to get
ftp://mirror.xmission.com/CPAN/authors/id/J/JW/JWIED/PlRPC-0.2015.tar.gz
--21:17:09-- ftp://mirror.xmission.com/CPAN/authors/id/J/JW/JWIED/PlRPC-0.2015.tar.gz
=> `-'
Connecting to mirror.xmission.com:21... connected!
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /CPAN/authors/id/J/JW/JWIED ... done.
==> PORT ... done. ==> RETR PlRPC-0.2015.tar.gz ... done.
Length: 17,450 (unauthoritative)
0K .......... ....... 100% @ 72.82 KB/s
21:17:20 (72.51 KB/s) - `-' saved [17450]
CPAN: MD5 security checks disabled because MD5 not installed.
Please consider installing the MD5 module.
x PlRPC-0.2015, 0 bytes, 0 tape blocks
x PlRPC-0.2015/ChangeLog, 2991 bytes, 6 tape blocks
x PlRPC-0.2015/lib, 0 bytes, 0 tape blocks
x PlRPC-0.2015/lib/Bundle, 0 bytes, 0 tape blocks
x PlRPC-0.2015/lib/Bundle/PlRPC.pm, 354 bytes, 1 tape blocks
x PlRPC-0.2015/lib/RPC, 0 bytes, 0 tape blocks
x PlRPC-0.2015/lib/RPC/PlClient.pm, 12955 bytes, 26 tape blocks
x PlRPC-0.2015/lib/RPC/PlServer, 0 bytes, 0 tape blocks
x PlRPC-0.2015/lib/RPC/PlServer/Comm.pm, 4832 bytes, 10 tape blocks
x PlRPC-0.2015/lib/RPC/PlServer/Test.pm, 280 bytes, 1 tape blocks
x PlRPC-0.2015/lib/RPC/PlServer.pm, 19645 bytes, 39 tape blocks
x PlRPC-0.2015/Makefile.PL, 2303 bytes, 5 tape blocks
x PlRPC-0.2015/MANIFEST, 221 bytes, 1 tape blocks
x PlRPC-0.2015/README, 12172 bytes, 24 tape blocks
x PlRPC-0.2015/t, 0 bytes, 0 tape blocks
x PlRPC-0.2015/t/base.t, 249 bytes, 1 tape blocks
x PlRPC-0.2015/t/client.t, 725 bytes, 2 tape blocks
x PlRPC-0.2015/t/compress.t, 1156 bytes, 3 tape blocks
x PlRPC-0.2015/t/crypt.t, 1480 bytes, 3 tape blocks
x PlRPC-0.2015/t/lib.pl, 1612 bytes, 4 tape blocks
x PlRPC-0.2015/t/methods.t, 1115 bytes, 3 tape blocks
x PlRPC-0.2015/t/server, 1406 bytes, 3 tape blocks
CPAN.pm: Going to build J/JW/JWIED/PlRPC-0.2015.tar.gz
Checking for Sys::Syslog ... ok
Checking if your kit is complete...
Looks good
Warning: prerequisite Storable failed to load: Can't locate Storable.pm in @INC (@INC
contains: /usr/local/lib/perl5/5.6.1/sun4-solaris /usr/local/lib/perl5/5.6.1
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris /usr/local/lib/perl5/site_perl/5.6.1
/usr/local/lib/perl5/site_perl .) at (eval 10) line 3.
Writing Makefile for RPC::PlServer
---- Unsatisfied dependencies detected during [J/JW/JWIED/PlRPC-0.2015.tar.gz] -----
Storable
Shall I follow them and prepend them to the queue
of modules we are processing right now? [yes] yes
Running make test
Delayed until after prerequisites
Running make install
Delayed until after prerequisites
Getopt::Long is up to date.
Running install for module DBI
Running make for T/TI/TIMB/DBI-1.20.tar.gz
Is already unwrapped into directory /.cpan/build/DBI-1.20
CPAN.pm: Going to build T/TI/TIMB/DBI-1.20.tar.gz
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Checking if your kit is complete...
Looks good
Writing Makefile for DBI
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
cp DBIXS.h blib/arch/auto/DBI/DBIXS.h
cp lib/DBD/NullP.pm blib/lib/DBD/NullP.pm
cp dbipport.h blib/arch/auto/DBI/dbipport.h
cp lib/DBI/Format.pm blib/lib/DBI/Format.pm
cp dbd_xsh.h blib/arch/auto/DBI/dbd_xsh.h
cp lib/DBI/Shell.pm blib/lib/DBI/Shell.pm
cp lib/DBI/FAQ.pm blib/lib/DBI/FAQ.pm
cp DBI.pm blib/lib/DBI.pm
cp lib/Bundle/DBI.pm blib/lib/Bundle/DBI.pm
cp lib/DBD/ExampleP.pm blib/lib/DBD/ExampleP.pm
cp lib/Win32/DBIODBC.pm blib/lib/Win32/DBIODBC.pm
cp lib/DBI/W32ODBC.pm blib/lib/DBI/W32ODBC.pm
cp lib/DBI/DBD.pm blib/lib/DBI/DBD.pm
cp lib/DBD/Proxy.pm blib/lib/DBD/Proxy.pm
cp lib/DBI/ProxyServer.pm blib/lib/DBI/ProxyServer.pm
cp dbi_sql.h blib/arch/auto/DBI/dbi_sql.h
cp Driver.xst blib/arch/auto/DBI/Driver.xst
cp lib/DBD/Sponge.pm blib/lib/DBD/Sponge.pm
/usr/local/bin/perl -p -e "s/~DRIVER~/Perl/g" < blib/arch/auto/DBI/Driver.xst >
Perl.xsi
/usr/local/bin/perl -I/usr/local/lib/perl5/5.6.1/sun4-solaris
-I/usr/local/lib/perl5/5.6.1 /usr/local/lib/perl5/5.6.1/ExtUtils/xsubpp -typemap
/usr/local/lib/perl5/5.6.1/ExtUtils/typemap Perl.xs > Perl.xsc && mv Perl.xsc Perl.c
gcc -c -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -O -DVERSION=\"1.20\" -DXS_VERSION=\"1.20\" -fPIC
-I/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE -Wall -Wno-comment -DDBI_NO_THREADS
Perl.c
cc1: Invalid option `-fno-strict-aliasing'
make: *** [Perl.o] Error 1
/usr/local/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
Running install for module DBD::Multiplex
Running make for T/TI/TIMB/DBI-1.19.tar.gz
Trying with "/usr/local/bin/wget -O -" to get
ftp://mirror.xmission.com/CPAN/authors/id/T/TI/TIMB/DBI-1.19.tar.gz
--21:18:28-- ftp://mirror.xmission.com/CPAN/authors/id/T/TI/TIMB/DBI-1.19.tar.gz
=> `-'
Connecting to mirror.xmission.com:21... connected!
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /CPAN/authors/id/T/TI/TIMB ... done.
==> PORT ... done. ==> RETR DBI-1.19.tar.gz ... done.
Length: 201,082 (unauthoritative)
0K .......... .......... .......... .......... .......... 25% @ 93.63 KB/s
50K .......... .......... .......... .......... .......... 50% @ 100.81 KB/s
100K .......... .......... .......... .......... .......... 76% @ 115.74 KB/s
150K .......... .......... .......... .......... ...... 100% @ 109.36 KB/s
21:18:40 (104.12 KB/s) - `-' saved [201082]
CPAN: MD5 security checks disabled because MD5 not installed.
Please consider installing the MD5 module.
x DBI-1.19, 0 bytes, 0 tape blocks
x DBI-1.19/DBI.xs, 89966 bytes, 176 tape blocks
x DBI-1.19/lib, 0 bytes, 0 tape blocks
x DBI-1.19/lib/DBD, 0 bytes, 0 tape blocks
x DBI-1.19/lib/DBD/NullP.pm, 2908 bytes, 6 tape blocks
x DBI-1.19/lib/DBD/Sponge.pm, 4173 bytes, 9 tape blocks
x DBI-1.19/lib/DBD/ADO.pm, 40606 bytes, 80 tape blocks
x DBI-1.19/lib/DBD/ExampleP.pm, 9226 bytes, 19 tape blocks
x DBI-1.19/lib/DBD/Multiplex.pm, 5157 bytes, 11 tape blocks
x DBI-1.19/lib/DBD/Proxy.pm, 21214 bytes, 42 tape blocks
x DBI-1.19/lib/DBI, 0 bytes, 0 tape blocks
x DBI-1.19/lib/DBI/FAQ.pm, 35949 bytes, 71 tape blocks
x DBI-1.19/lib/DBI/W32ODBC.pm, 4594 bytes, 9 tape blocks
x DBI-1.19/lib/DBI/DBD.pm, 58250 bytes, 114 tape blocks
x DBI-1.19/lib/DBI/Format.pm, 11484 bytes, 23 tape blocks
x DBI-1.19/lib/DBI/Shell.pm, 29172 bytes, 57 tape blocks
x DBI-1.19/lib/DBI/ProxyServer.pm, 17169 bytes, 34 tape blocks
x DBI-1.19/lib/Bundle, 0 bytes, 0 tape blocks
x DBI-1.19/lib/Bundle/DBI.pm, 1138 bytes, 3 tape blocks
x DBI-1.19/lib/Win32, 0 bytes, 0 tape blocks
x DBI-1.19/lib/Win32/DBIODBC.pm, 4532 bytes, 9 tape blocks
x DBI-1.19/MANIFEST, 1828 bytes, 4 tape blocks
x DBI-1.19/dbipport.h, 7795 bytes, 16 tape blocks
x DBI-1.19/Changes, 33301 bytes, 66 tape blocks
x DBI-1.19/t, 0 bytes, 0 tape blocks
x DBI-1.19/t/proxy.t, 10282 bytes, 21 tape blocks
x DBI-1.19/t/examp.t, 11386 bytes, 23 tape blocks
x DBI-1.19/t/basics.t, 1919 bytes, 4 tape blocks
x DBI-1.19/t/shell.t, 632 bytes, 2 tape blocks
x DBI-1.19/t/subclass.t, 1609 bytes, 4 tape blocks
x DBI-1.19/t/preparse.t, 1489 bytes, 3 tape blocks
x DBI-1.19/t/dbidrv.t, 1810 bytes, 4 tape blocks
x DBI-1.19/t/meta.t, 958 bytes, 2 tape blocks
x DBI-1.19/dbish.PL, 741 bytes, 2 tape blocks
x DBI-1.19/dbi_sql.h, 1570 bytes, 4 tape blocks
x DBI-1.19/Perl.xs, 394 bytes, 1 tape blocks
x DBI-1.19/Driver.xst, 12099 bytes, 24 tape blocks
x DBI-1.19/README, 4966 bytes, 10 tape blocks
x DBI-1.19/DBIXS.h, 17077 bytes, 34 tape blocks
x DBI-1.19/test.pl, 3887 bytes, 8 tape blocks
x DBI-1.19/dbd_xsh.h, 2050 bytes, 5 tape blocks
x DBI-1.19/Makefile.PL, 6833 bytes, 14 tape blocks
x DBI-1.19/DBI.pm, 152324 bytes, 298 tape blocks
x DBI-1.19/dbiproxy.PL, 5578 bytes, 11 tape blocks
x DBI-1.19/ToDo, 8439 bytes, 17 tape blocks
CPAN.pm: Going to build T/TI/TIMB/DBI-1.19.tar.gz
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Checking if your kit is complete...
Looks good
Writing Makefile for DBI
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
cp lib/DBD/Proxy.pm blib/lib/DBD/Proxy.pm
cp lib/DBI/ProxyServer.pm blib/lib/DBI/ProxyServer.pm
cp DBIXS.h blib/arch/auto/DBI/DBIXS.h
cp dbi_sql.h blib/arch/auto/DBI/dbi_sql.h
cp lib/DBD/NullP.pm blib/lib/DBD/NullP.pm
cp dbipport.h blib/arch/auto/DBI/dbipport.h
cp lib/DBI/Format.pm blib/lib/DBI/Format.pm
cp dbd_xsh.h blib/arch/auto/DBI/dbd_xsh.h
cp lib/DBI/Shell.pm blib/lib/DBI/Shell.pm
cp lib/DBD/ADO.pm blib/lib/DBD/ADO.pm
cp DBI.pm blib/lib/DBI.pm
cp lib/DBI/FAQ.pm blib/lib/DBI/FAQ.pm
cp lib/DBD/ExampleP.pm blib/lib/DBD/ExampleP.pm
cp lib/Bundle/DBI.pm blib/lib/Bundle/DBI.pm
cp Driver.xst blib/arch/auto/DBI/Driver.xst
cp lib/Win32/DBIODBC.pm blib/lib/Win32/DBIODBC.pm
cp lib/DBD/Sponge.pm blib/lib/DBD/Sponge.pm
cp lib/DBI/W32ODBC.pm blib/lib/DBI/W32ODBC.pm
cp lib/DBI/DBD.pm blib/lib/DBI/DBD.pm
cp lib/DBD/Multiplex.pm blib/lib/DBD/Multiplex.pm
/usr/local/bin/perl -p -e "s/~DRIVER~/Perl/g" < blib/arch/auto/DBI/Driver.xst >
Perl.xsi
/usr/local/bin/perl -I/usr/local/lib/perl5/5.6.1/sun4-solaris
-I/usr/local/lib/perl5/5.6.1 /usr/local/lib/perl5/5.6.1/ExtUtils/xsubpp -typemap
/usr/local/lib/perl5/5.6.1/ExtUtils/typemap Perl.xs > Perl.xsc && mv Perl.xsc Perl.c
gcc -c -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -O -DVERSION=\"1.19\" -DXS_VERSION=\"1.19\" -fPIC
-I/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE -Wall -Wno-comment -DDBI_NO_THREADS
Perl.c
cc1: Invalid option `-fno-strict-aliasing'
make: *** [Perl.o] Error 1
/usr/local/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
Bundle summary: The following items in bundle Bundle::DBI had installation
problems:
Storable RPC::PlServer DBI DBD::Multiplex
Running install for module Storable
Running make for R/RA/RAM/Storable-1.0.13.tar.gz
Is already unwrapped into directory /.cpan/build/Storable-1.0.13
Has already been processed within this session
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
Running make for J/JW/JWIED/PlRPC-0.2015.tar.gz
Is already unwrapped into directory /.cpan/build/PlRPC-0.2015
CPAN.pm: Going to build J/JW/JWIED/PlRPC-0.2015.tar.gz
cp lib/RPC/PlClient.pm blib/lib/RPC/PlClient.pm
cp lib/RPC/PlServer.pm blib/lib/RPC/PlServer.pm
cp lib/RPC/PlServer/Test.pm blib/lib/RPC/PlServer/Test.pm
cp lib/RPC/PlServer/Comm.pm blib/lib/RPC/PlServer/Comm.pm
cp lib/Bundle/PlRPC.pm blib/lib/Bundle/PlRPC.pm
Manifying blib/man3/RPC::PlClient.3
Manifying blib/man3/RPC::PlServer.3
Manifying blib/man3/Bundle::PlRPC.3
/usr/local/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/local/bin/perl -Iblib/arch -Iblib/lib
-I/usr/local/lib/perl5/5.6.1/sun4-solaris -I/usr/local/lib/perl5/5.6.1 -e 'use
Test::Harness qw(&runtests $verbose); $verbose=0; runtests @ARGV;' t/*.t
t/base..............Can't locate Storable.pm in @INC (@INC contains: blib/arch
blib/lib /usr/local/lib/perl5/5.6.1/sun4-solaris
/usr/local/lib/perl5/5.6.1/sun4-solaris /usr/local/lib/perl5/5.6.1/sun4-solaris
/usr/local/lib/perl5/5.6.1 /usr/local/lib/perl5/5.6.1/sun4-solaris
/usr/local/lib/perl5/5.6.1/sun4-solaris /usr/local/lib/perl5/5.6.1
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris /usr/local/lib/perl5/site_perl/5.6.1
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris /usr/local/lib/perl5/site_perl/5.6.1
/usr/local/lib/perl5/site_perl . /usr/local/lib/perl5/5.6.1/sun4-solaris
/usr/local/lib/perl5/5.6.1 /usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris
/usr/local/lib/perl5/site_perl/5.6.1 /usr/local/lib/perl5/site_perl .) at
blib/lib/RPC/PlServer/Comm.pm line 25.
Compilation failed in require at t/base.t line 5.
t/base..............dubious
Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 1-3
Failed 3/3 tests, 0.00% okay
t/client............Can't locate Storable.pm in @INC (@INC contains: blib/arch
blib/lib /usr/local/lib/perl5/5.6.1/sun4-solaris
/usr/local/lib/perl5/5.6.1/sun4-solaris /usr/local/lib/perl5/5.6.1/sun4-solaris
/usr/local/lib/perl5/5.6.1 /usr/local/lib/perl5/5.6.1/sun4-solaris
/usr/local/lib/perl5/5.6.1/sun4-solaris /usr/local/lib/perl5/5.6.1
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris /usr/local/lib/perl5/site_perl/5.6.1
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris /usr/local/lib/perl5/site_perl/5.6.1
/usr/local/lib/perl5/site_perl . /usr/local/lib/perl5/5.6.1/sun4-solaris
/usr/local/lib/perl5/5.6.1 /usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris
/usr/local/lib/perl5/site_perl/5.6.1 /usr/local/lib/perl5/site_perl .) at
blib/lib/RPC/PlServer/Comm.pm line 25.
Compilation failed in require at blib/lib/RPC/PlClient.pm line 26.
BEGIN failed--compilation aborted at blib/lib/RPC/PlClient.pm line 26.
Compilation failed in require at t/lib.pl line 4.
Compilation failed in require at t/client.t line 7.
t/client............dubious
Test returned status 2 (wstat 512, 0x200)
t/compress..........skipped test on this platform
t/crypt.............skipped test on this platform
t/methods...........Can't locate Storable.pm in @INC (@INC contains: blib/arch
blib/lib /usr/local/lib/perl5/5.6.1/sun4-solaris
/usr/local/lib/perl5/5.6.1/sun4-solaris /usr/local/lib/perl5/5.6.1/sun4-solaris
/usr/local/lib/perl5/5.6.1 /usr/local/lib/perl5/5.6.1/sun4-solaris
/usr/local/lib/perl5/5.6.1/sun4-solaris /usr/local/lib/perl5/5.6.1
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris /usr/local/lib/perl5/site_perl/5.6.1
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris /usr/local/lib/perl5/site_perl/5.6.1
/usr/local/lib/perl5/site_perl . /usr/local/lib/perl5/5.6.1/sun4-solaris
/usr/local/lib/perl5/5.6.1 /usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris
/usr/local/lib/perl5/site_perl/5.6.1 /usr/local/lib/perl5/site_perl .) at
blib/lib/RPC/PlServer/Comm.pm line 25.
Compilation failed in require at blib/lib/RPC/PlClient.pm line 26.
BEGIN failed--compilation aborted at blib/lib/RPC/PlClient.pm line 26.
Compilation failed in require at t/lib.pl line 4.
Compilation failed in require at t/methods.t line 7.
t/methods...........dubious
Test returned status 2 (wstat 512, 0x200)
Failed Test Status Wstat Total Fail Failed List of Failed
--------------------------------------------------------------------------------
t/base.t 2 512 3 3 100.00% 1-3
t/client.t 2 512 ?? ?? % ??
t/methods.t 2 512 ?? ?? % ??
2 tests skipped.
Failed 3/5 test scripts, 40.00% okay. 3/3 subtests failed, 0.00% okay.
make: *** [test_dynamic] Error 2
/usr/local/bin/make test -- NOT OK
Running make install
make test had returned bad status, won't install without force
bash-2.05#
