Read the README.hpux file that is in the DBD-Oracle cpan module (attached for your convenience)
-----Original Message----- From: Sergey Nitsulenko [mailto:[EMAIL PROTECTED]] Sent: Friday, January 11, 2002 3:03 AM To: [EMAIL PROTECTED] Subject: install DBI on HP-UX 11.0 Hello, Can You help me install DBI without gcc? I have cc and aCC on server HP-UX 11.0. ------------------------------------------------------ # /opt/perl/bin/perl -v This is perl, v5.6.1 built for PA-RISC1.1-thread-multi (with 1 registered patch, see perl -V for more detail) # pwd /tmp/DBI-1.20 # /opt/perl/bin/perl ./Makefile.PL *** You are using a perl with experimental threading enabled! *** You should be aware that using multiple threads is unstable *** are should NOT be done in production environments. DBI thread mutex protection is enabled *** Note: The optional PlRPC-modules (RPC::PlServer etc) are not installed. If you want to use the DBD::Proxy driver and DBI::ProxyServer modules, then you'll need to install the RPC::PlServer, RPC::PlClient, Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you. You can install them any time after installing the DBI. You do *not* need these modules for typical DBI usage. Optional modules are available from any CPAN mirror, in particular http://www.perl.com/CPAN/modules/by-module http://www.perl.org/CPAN/modules/by-module ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module Checking if your kit is complete... Looks good Writing Makefile for DBI Remember to actually *read* the README file! Use 'make' to build the software (dmake or nmake on Windows). Then 'make test' to execute self tests. Then 'make install' to install the DBI and then delete this working directory before unpacking and building any DBD::* drivers. # make cp DBIXS.h blib/arch/auto/DBI/DBIXS.h cp lib/DBD/NullP.pm blib/lib/DBD/NullP.pm cp dbipport.h blib/arch/auto/DBI/dbipport.h cp lib/DBI/Format.pm blib/lib/DBI/Format.pm cp dbd_xsh.h blib/arch/auto/DBI/dbd_xsh.h cp lib/DBI/Shell.pm blib/lib/DBI/Shell.pm cp lib/DBI/FAQ.pm blib/lib/DBI/FAQ.pm cp DBI.pm blib/lib/DBI.pm cp lib/Bundle/DBI.pm blib/lib/Bundle/DBI.pm cp lib/DBD/ExampleP.pm blib/lib/DBD/ExampleP.pm cp lib/Win32/DBIODBC.pm blib/lib/Win32/DBIODBC.pm cp lib/DBI/W32ODBC.pm blib/lib/DBI/W32ODBC.pm cp lib/DBI/DBD.pm blib/lib/DBI/DBD.pm cp lib/DBD/Proxy.pm blib/lib/DBD/Proxy.pm cp lib/DBI/ProxyServer.pm blib/lib/DBI/ProxyServer.pm cp dbi_sql.h blib/arch/auto/DBI/dbi_sql.h cp Driver.xst blib/arch/auto/DBI/Driver.xst cp lib/DBD/Sponge.pm blib/lib/DBD/Sponge.pm /opt/perl/bin/perl -p -e "s/~DRIVER~/Perl/g" < blib/arch/auto/DBI/Driver ...xst > Perl.xsi /opt/perl/bin/perl -I/opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi -I/opt/ perl/lib/5.6.1 /opt/perl/lib/5.6.1/ExtUtils/xsubpp -typemap /opt/perl/lib/5.6.1 /ExtUtils/typemap Perl.xs > Perl.xsc && mv Perl.xsc Perl.c gcc -c -D_POSIX_C_SOURCE=199506L -D_HPUX_SOURCE -L/lib/pa1.1 -DUINT32_M AX_BROKEN -mpa-risc-1-1 -fPIC -fno-strict-aliasing -I/usr/local/include -D_LARGE FILE_SOURCE -D_FILE_OFFSET_BITS=64 -O -DVERSION=\"1.20\" -DXS_VERSION=\"1.20 \" -fPIC -I/opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi/CORE Perl.c sh: gcc: not found *** Error exit code 127 Stop. # make test gcc -c -D_POSIX_C_SOURCE=199506L -D_HPUX_SOURCE -L/lib/pa1.1 -DUINT32_M AX_BROKEN -mpa-risc-1-1 -fPIC -fno-strict-aliasing -I/usr/local/include -D_LARGE FILE_SOURCE -D_FILE_OFFSET_BITS=64 -O -DVERSION=\"1.20\" -DXS_VERSION=\"1.20 \" -fPIC -I/opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi/CORE Perl.c sh: gcc: not found *** Error exit code 127 Stop. -- Best regards, Sergey Nitsulenko Moldova Steel Works email: [EMAIL PROTECTED]
README.hpux
Description: Binary data
