I had the same problem. Follow the suggestions in the DBI README.hpux (DBD-Oracle-1.12) regarding perl configuration. My config.sh is attached. Stefan
-----Original Message----- From: Briscoe B. Brown [mailto:[EMAIL PROTECTED]] Sent: Friday, June 14, 2002 8:02 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: DBI module installation on HP-UX 11.11 64 bit. I have Perl 5.6.1 installed from the HP application disk for HP-UX 11i. I am running HP-UX 11.11 (11i) 64 bit. I have also installed "gcc-3.1". When I try to install the DBI module (most any version - output from 1.26 is below), in the "make" step I get "*** Error exit code 1" (see output below) Any help would be greatly appreciated. Ri03u08# perl Makefile.PL *** You are using a perl with experimental threading enabled! *** You should be aware that using multiple threads is unstable *** are should NOT be done in production environments. DBI 5.005-style thread mutex protection is enabled DBI hs not been tested with new perl iThreads *** Note: The optional PlRPC-modules (RPC::PlServer etc) are not installed. If you want to use the DBD::Proxy driver and DBI::ProxyServer modules, then you'll need to install the RPC::PlServer, RPC::PlClient, Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you. You can install them any time after installing the DBI. You do *not* need these modules for typical DBI usage. Optional modules are available from any CPAN mirror, in particular http://www.perl.com/CPAN/modules/by-module http://www.perl.org/CPAN/modules/by-module ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module Creating extra DBI::PurePerl test: t/zz_01basics_pp.t Creating extra DBI::PurePerl test: t/zz_02dbidrv_pp.t Creating extra DBI::PurePerl test: t/zz_03hleak_pp.t Creating extra DBI::PurePerl test: t/zz_04mods_pp.t Creating extra DBI::PurePerl test: t/zz_10examp_pp.t Creating extra DBI::PurePerl test: t/zz_15array_pp.t Creating extra DBI::PurePerl test: t/zz_20meta_pp.t Creating extra DBI::PurePerl test: t/zz_30subclass_pp.t Creating extra DBI::PurePerl test: t/zz_40profile_pp.t Creating extra DBI::PurePerl test: t/zz_60preparse_pp.t Creating extra DBI::PurePerl test: t/zz_70shell_pp.t Creating extra DBI::PurePerl test: t/zz_80proxy_pp.t Checking if your kit is complete... Looks good Writing Makefile for DBI Remember to actually *read* the README file! Use 'make' to build the software (dmake or nmake on Windows). Then 'make test' to execute self tests. Then 'make install' to install the DBI and then delete this working directory before unpacking and building any DBD::* drivers. Ri03u08# Ri03u08# make //opt/perl/bin/perl -I/opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi -I /opt/perl/lib/5.6.1 -MExtUtils::Command -e mkpath blib/lib/DBI rm -f blib/lib/DBI/Changes.pm cp Changes blib/lib/DBI/Changes.pm cp Driver_xst.h blib/arch/auto/DBI/Driver_xst.h cp DBIXS.h blib/arch/auto/DBI/DBIXS.h cp lib/DBD/NullP.pm blib/lib/DBD/NullP.pm cp dbipport.h blib/arch/auto/DBI/dbipport.h cp lib/DBI/Format.pm blib/lib/DBI/Format.pm cp lib/DBI/Const/GetInfoReturn.pm blib/lib/DBI/Const/GetInfoReturn.pm cp dbd_xsh.h blib/arch/auto/DBI/dbd_xsh.h cp lib/DBI/Const/GetInfo/ANSI.pm blib/lib/DBI/Const/GetInfo/ANSI.pm cp lib/DBI/Profile.pm blib/lib/DBI/Profile.pm cp lib/DBI/PurePerl.pm blib/lib/DBI/PurePerl.pm cp lib/DBI/Shell.pm blib/lib/DBI/Shell.pm cp DBI.pm blib/lib/DBI.pm cp lib/DBI/FAQ.pm blib/lib/DBI/FAQ.pm cp lib/DBD/ExampleP.pm blib/lib/DBD/ExampleP.pm cp lib/Bundle/DBI.pm blib/lib/Bundle/DBI.pm cp lib/Win32/DBIODBC.pm blib/lib/Win32/DBIODBC.pm cp lib/DBI/W32ODBC.pm blib/lib/DBI/W32ODBC.pm cp lib/DBI/DBD.pm blib/lib/DBI/DBD.pm cp lib/DBI/Const/GetInfoType.pm blib/lib/DBI/Const/GetInfoType.pm cp lib/DBI/ProxyServer.pm blib/lib/DBI/ProxyServer.pm cp lib/DBD/Proxy.pm blib/lib/DBD/Proxy.pm cp dbi_sql.h blib/arch/auto/DBI/dbi_sql.h cp Driver.xst blib/arch/auto/DBI/Driver.xst cp lib/DBI/Const/GetInfo/ODBC.pm blib/lib/DBI/Const/GetInfo/ODBC.pm cp lib/DBD/Sponge.pm blib/lib/DBD/Sponge.pm //opt/perl/bin/perl -p -e "s/~DRIVER~/Perl/g" < blib/arch/auto/DBI/Dr iver.xst > Perl.xsi //opt/perl/bin/perl -I/opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi -I/ opt/perl/lib/5.6.1 /opt/perl/lib/5.6.1/ExtUtils/xsubpp -typemap /opt/perl/li b/5.6.1/ExtUtils/typemap Perl.xs > Perl.xsc && mv Perl.xsc Perl.c gcc -c -D_POSIX_C_SOURCE=199506L -D_HPUX_SOURCE -L/lib/pa1.1 -DUINT3 2_MAX_BROKEN -mpa-risc-1-1 -fPIC -fno-strict-aliasing -I/usr/local/include -D _LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O -DVERSION=\"1.26\" -DXS_VERSI ON=\"1.26\" -fPIC -I/opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi/CORE -Wall -W no-comment Perl.c cc1: warning: changing search order for system directory "/usr/local/include" cc1: warning: as it has already been specified as a non-system directory In file included from /opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi/CORE/perl..h :713, from DBIXS.h:19, from Perl.xs:1: /usr/include/sys/socket.h:484: parse error before "sendfile" /usr/include/sys/socket.h:485: parse error before "bsize_t" /usr/include/sys/socket.h:486: parse error before "sendpath" /usr/include/sys/socket.h:487: parse error before "bsize_t" /usr/include/sys/socket.h:501: parse error before "__sendfile64" /usr/include/sys/socket.h:501: parse error before "bsize_t" /usr/include/sys/socket.h:502: parse error before "__sendpath64" /usr/include/sys/socket.h:502: parse error before "bsize_t" /usr/include/sys/socket.h:504: parse error before "sendfile" /usr/include/sys/socket.h: In function `sendfile': /usr/include/sys/socket.h:504: parse error before "bsize_t" /usr/include/sys/socket.h: At top level: /usr/include/sys/socket.h:505: parse error before "sendpath" /usr/include/sys/socket.h: In function `sendpath': /usr/include/sys/socket.h:505: parse error before "bsize_t" Perl.xsi: In function `XS_DBD__Perl__st__prepare': Perl.xsi:253: warning: operation on `lna' may be undefined Perl.xsi: In function `XS_DBD__Perl__st_bind_param': Perl.xsi:289: warning: operation on `lna' may be undefined Perl.xsi: In function `XS_DBD__Perl__st_bind_param_inout': Perl.xsi:325: warning: operation on `lna' may be undefined *** Error exit code 1 Stop. Ri03u08# Ri03u08# perl -V Summary of my perl5 (revision 5.0 version 6 subversion 1) configuration: Platform: osname=hpux, osvers=11.00, archname=PA-RISC1.1-thread-multi uname='hp-ux llbertha b.11.00 u 9000800 2002402864 unlimited-user licen e ' config_args='-des -Dcf_by=ActiveState -Dcf_email=ActivePerl@ActiveState com -Uinstallusrbinperl -Dusethreads -Duseithreads -Duselargefiles -Dinc_ve sion_list=5.6.0/$archname 5.6.0 -Dcc=gcc -Accflags=-mpa-risc-1-1 -fPIC -Dcc dlflags=-fPIC -Dd_attribut=undef -Darchname=PA-RISC1.1 -Dprefix=/opt/perl' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplici y=define useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef Compiler: cc='gcc', ccflags ='-D_POSIX_C_SOURCE=199506L -D_HPUX_SOURCE -L/lib/pa1 1 -DUINT32_MAX_BROKEN -mpa-risc-1-1 -fPIC -fno-strict-aliasing -I/usr/local include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O', cppflags='-D_POSIX_C_SOURCE=199506L -D_HPUX_SOURCE -L/lib/pa1.1 -DUINT3 _MAX_BROKEN -mpa-risc-1-1 -fPIC -fno-strict-aliasing -I/usr/local/include' ccversion='', gccversion='2.9-hppa-991112', gccosandvers='hpux11.00' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lsee size=8 alignbytes=8, usemymalloc=n, prototype=define Linker and Libraries: ld='ld', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib /usr/ccs/lib libs=-lnsl -lnm -lndbm -lmalloc -ldld -lm -lpthread -lc -lndir -lcrypt lsec perllibs=-lnsl -lnm -lmalloc -ldld -lm -lpthread -lc -lndir -lcrypt -ls c libc=/lib/libc.sl, so=sl, useshrplib=false, libperl=libperl.a Dynamic Linking: dlsrc=dl_hpux.xs, dlext=sl, d_dlsymun=undef, ccdlflags='-Wl,-E ' cccdlflags='-fPIC', lddlflags='-b -L/usr/local/lib' Characteristics of this binary (from libperl): Compile-time options: MULTIPLICITY USE_ITHREADS USE_LARGE_FILES PERL_IMPL CIT_CONTEXT Locally applied patches: ActivePerl Build 627 Built under hpux Compiled at Jun 20 2001 21:42:53 @INC: /opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi /opt/perl/lib/5.6.1 /opt/perl/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /opt/perl/lib/site_perl/5.6.1 /opt/perl/lib/site_perl Briscoe Brown Wyeth Consumer Healthcare 804-257-2663 (V) 804-256-5992 (F)
config.sh
Description: Binary data