No parameters, no modifications as of yet. Just a lot of reading
and researching.
Basically...
perl Makefile.PL
make
ERRORS...
Scott Nipp
Phone: (214) 858-1289
E-mail: [EMAIL PROTECTED]
Web: http:\\ldsa.sbcld.sbc.com <http://ldsa.sbcld.sbc.com/>
-----Original Message-----
From: Vinnie Lima [mailto:[EMAIL PROTECTED]
Sent: Friday, August 20, 2004 12:18 PM
To: NIPP, SCOTT V (SBCSI)
Cc: [EMAIL PROTECTED]
Subject: Re: DBD driver compile on HP...
Hmm.....dont think this is going to help you at all, but i'm getting all
kinds of error on my HPUX 11.00 platform. What (if any) parameters did
you use for your make command?
<snip>
nanokov:/home/vlima/DBD-mysql-2.9004> perl Makefile.PL
--cflags=-I/opt/mysql/mysql \
> "--libs=-L/opt/mysql/mysql -lmysqlclient"
Can't exec "mysql_config": No such file or directory at Makefile.PL line
174.
readline() on closed filehandle PIPE at Makefile.PL line 176.
Can't exec "mysql_config": No such file or directory at Makefile.PL line
174.
readline() on closed filehandle PIPE at Makefile.PL line 176.
Can't exec "mysql_config": No such file or directory at Makefile.PL line
174.
readline() on closed filehandle PIPE at Makefile.PL line 176.
Can't exec "mysql_config": No such file or directory at Makefile.PL line
174.
readline() on closed filehandle PIPE at Makefile.PL line 176.
Can't exec "mysql_config": No such file or directory at Makefile.PL line
174.
readline() on closed filehandle PIPE at Makefile.PL line 176.
Can't exec "mysql_config": No such file or directory at Makefile.PL line
174.
readline() on closed filehandle PIPE at Makefile.PL line 176.
Can't exec "mysql_config": No such file or directory at Makefile.PL line
174.
readline() on closed filehandle PIPE at Makefile.PL line 176.
I will use the following settings for compiling and testing:
cflags (Users choice) = -I/opt/mysql/mysql
libs (Users choice) = -L/opt/mysql/mysql -lmysqlclient
nocatchstderr (default ) = 0
nofoundrows (default ) = 0
ssl (guessed ) = 0
testdb (default ) = test
testhost (default ) =
testpassword (default ) =
testuser (default ) =
To change these settings, see 'perl Makefile.PL --help' and
'perldoc INSTALL'.
Checking if your kit is complete...
Looks good
Note (probably harmless): No library found for -lmysqlclient
Using DBI 1.21 installed in
/opt/perl/lib/site_perl/5.6.1/9000/800-hpux/auto/DBI
Writing Makefile for DBD::mysql
nanokov:/home/vlima/DBD-mysql-2.9004> make
cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm
cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod
cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm
cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm
cp lib/Mysql/Statement.pm blib/lib/Mysql/Statement.pm
cp lib/Mysql.pm blib/lib/Mysql.pm
gcc -c -I/opt/perl/lib/site_perl/5.6.1/9000/800-hpux/auto/DBI
-I/opt/mysql/mysql -fno-strict-aliasing -O -DVERSION=\"2.9004\"
-DXS_VERSION=\"2.9004\" -fpic -I/opt/perl/lib/5.6.1/9000/800-hpux/CORE
dbdimp.c
In file included from /usr/include/locale.h:157,
from /opt/perl/lib/5.6.1/9000/800-hpux/CORE/perl.h:465,
from
/opt/perl/lib/site_perl/5.6.1/9000/800-hpux/auto/DBI/DBIXS.h:19,
from dbdimp.h:20,
from dbdimp.c:19:
/opt/gcc/lib/gcc-lib/hppa2.0n-hp-hpux11.00/2.95.3/include/stdio.h:30:
warning: `__va__list' redefined
/usr/include/locale.h:26: warning: this is the location of the previous
definition
In file included from /opt/perl/lib/5.6.1/9000/800-hpux/CORE/perl.h:482,
from
/opt/perl/lib/site_perl/5.6.1/9000/800-hpux/auto/DBI/DBIXS.h:19,
from dbdimp.h:20,
from dbdimp.c:19:
/usr/include/setjmp.h:26: warning: `__va__list' redefined
/opt/gcc/lib/gcc-lib/hppa2.0n-hp-hpux11.00/2.95.3/include/stdio.h:30:
warning: this is the location of the previous definition
In file included from dbdimp.c:19:
dbdimp.h:21: mysql.h: No such file or directory
dbdimp.h:22: errmsg.h: No such file or directory
*** Error exit code 1
Stop.
nanokov:/home/vlima/DBD-mysql-2.9004> perl -V
Summary of my perl5 (revision 5.0 version 6 subversion 1) configuration:
Platform:
osname=hpux, osvers=11.00, archname=9000/800-hpux
uname='hp-ux nanokov b.11.00 a 9000800 130931527 two-user license '
config_args='-Dcc=gcc -Dprefix=/opt/perl'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef
usemultiplicity=undef
useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
Compiler:
cc='gcc', ccflags ='-fno-strict-aliasing',
optimize='-O',
cppflags='-fno-strict-aliasing'
ccversion='', gccversion='2.95.3 20010315 (release)',
gccosandvers='hpux11.00'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=4
alignbytes=8, usemymalloc=y, prototype=define
Linker and Libraries:
ld='ld', ldflags =' -L/usr/local/lib'
libpth=/opt/gcc/lib /usr/local/lib /lib /usr/lib
libs=-lnsl -lnm -lndbm -ldbm -ldld -lm -lc -lndir -lcrypt -lsec
-lBSD -lPW
perllibs=-lnsl -lnm -ldld -lm -lc -lndir -lcrypt -lsec -lBSD -lPW
libc=/usr/lib/libc.sl, so=sl, useshrplib=false, libperl=libperl.a
Dynamic Linking:
dlsrc=dl_hpux.xs, dlext=sl, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-b -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: USE_LARGE_FILES
Built under hpux
Compiled at Feb 5 2002 16:07:56
@INC:
/opt/perl/lib/5.6.1/9000/800-hpux
/opt/perl/lib/5.6.1
/opt/perl/lib/site_perl/5.6.1/9000/800-hpux
/opt/perl/lib/site_perl/5.6.1
/opt/perl/lib/site_perl
.
</snip>
Vinnie Lima
------------------------------------------------------------------------
----------------
This is a PRIVATE message. If you are not the intended recipient, please
delete without copying and kindly advise us by e-mail of the mistake in
delivery. NOTE: Regardless of content, this e-mail shall not operate to
bind CSC to any order or other contract unless pursuant to explicit
written agreement or government initiative expressly permitting the use
of e-mail for such purpose.
------------------------------------------------------------------------
----------------
"NIPP, SCOTT V \(SBCSI\)" <sn4265
@sbc.com>
08/20/2004 12:56 PM
To: <[EMAIL PROTECTED]>
cc:
Subject: DBD driver compile on HP...
I know that this question has come up before. I think
I have
even asked it long, long ago. Unfortunately, this is not something I do
even infrequently, more like once in a blue moon. The problem is once
again getting DBD::MySQL to compile and play nice on HP-UX. Here are
the errors I am seeing:
system(root):/home/user/perl/DBD-mysql-2.9004# make
gcc -c
-I/opt/perl/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi/auto/DBI
-I'/usr/include/mysql' -DDBD_MYSQL_WITH_SSL -D_POSIX_C_SOURCE=199506L
-D_HPUX_SOURCE -L/lib/pa1.1 -DUINT32_MAX_BROKEN -mpa-risc-1-1 -fPIC
-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -O -DVERSION=\"2.9004\"
-DXS_VERSION=\"2.9004\" -fPIC
-I/opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi/CORE dbdimp.c
cc1: warning: changing search order for system directory
"/usr/local/include"
cc1: warning: as it has already been specified as a non-system
directory
In file included from
/opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi/CORE/perl.h:713,
from
/opt/perl/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi/auto/DBI/DBIXS.h:1
9,
from dbdimp.h:20,
from dbdimp.c:19:
/usr/include/sys/socket.h:484: parse error before "sendfile"
/usr/include/sys/socket.h:485: parse error before "bsize_t"
/usr/include/sys/socket.h:486: parse error before "sendpath"
/usr/include/sys/socket.h:487: parse error before "bsize_t"
/usr/include/sys/socket.h:501: parse error before "__sendfile64"
/usr/include/sys/socket.h:501: parse error before "bsize_t"
/usr/include/sys/socket.h:502: parse error before "__sendpath64"
/usr/include/sys/socket.h:502: parse error before "bsize_t"
/usr/include/sys/socket.h:504: parse error before "sendfile"
/usr/include/sys/socket.h: In function `sendfile':
/usr/include/sys/socket.h:504: parse error before "bsize_t"
/usr/include/sys/socket.h: At top level:
/usr/include/sys/socket.h:505: parse error before "sendpath"
/usr/include/sys/socket.h: In function `sendpath':
/usr/include/sys/socket.h:505: parse error before "bsize_t"
*** Error exit code 1
Stop.
Here is the Perl information...
system(root):/home/user/perl/DBD-mysql-2.9004# perl -V
Summary of my perl5 (revision 5.0 version 6 subversion 1) configuration:
Platform:
osname=hpux, osvers=11.00, archname=PA-RISC1.1-thread-multi
uname='hp-ux llbertha b.11.00 u 9000800 2002402864 unlimited-user
license '
config_args='-des -Dcf_by=ActiveState
[EMAIL PROTECTED] -Uinstallusrbinperl -Dusethreads
-Duseithreads -Duselargefiles -Dinc_version_list=5.6.0/$archname 5.6.0
-Dcc=gcc -Accflags=-mpa-risc-1-1 -fPIC -Dcccdlflags=-fPIC
-Dd_attribut=undef -Darchname=PA-RISC1.1 -Dprefix=/opt/perl'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
Compiler:
cc='gcc', ccflags ='-D_POSIX_C_SOURCE=199506L -D_HPUX_SOURCE
-L/lib/pa1.1 -DUINT32_MAX_BROKEN -mpa-risc-1-1 -fPIC
-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-O',
cppflags='-D_POSIX_C_SOURCE=199506L -D_HPUX_SOURCE -L/lib/pa1.1
-DUINT32_MAX_BROKEN -mpa-risc-1-1 -fPIC -fno-strict-aliasing
-I/usr/local/include'
ccversion='', gccversion='2.9-hppa-991112', gccosandvers='hpux11.00'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=8, usemymalloc=n, prototype=define
Linker and Libraries:
ld='ld', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /usr/ccs/lib
libs=-lnsl -lnm -lndbm -lmalloc -ldld -lm -lpthread -lc -lndir
-lcrypt -lsec
perllibs=-lnsl -lnm -lmalloc -ldld -lm -lpthread -lc -lndir -lcrypt
-lsec
libc=/lib/libc.sl, so=sl, useshrplib=false, libperl=libperl.a
Dynamic Linking:
dlsrc=dl_hpux.xs, dlext=sl, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-fPIC', lddlflags='-b -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY USE_ITHREADS USE_LARGE_FILES
PERL_IMPLICIT_CONTEXT
Locally applied patches:
ActivePerl Build 627
Built under hpux
Compiled at Jun 20 2001 21:42:53
@INC:
/opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi
/opt/perl/lib/5.6.1
/opt/perl/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi
/opt/perl/lib/site_perl/5.6.1
/opt/perl/lib/site_perl
.
Thanks for the help. Sorry for asking the same question
yet
again.
Scott Nipp
Phone: (214) 858-1289
E-mail: [EMAIL PROTECTED]
Web: http:\\ldsa.sbcld.sbc.com
