Hi Benhour, Have you looked at any of the tutorials on geometry creation and solid mechanics? I believe that these specific points are covered there.
Regards, J-P On Thursday, July 7, 2016 at 5:21:30 PM UTC+2, benhour.amiria...@gmail.com wrote: > > Dear Daniel, > Thanks very much for your response. I should model a whole circle, however > for simplicity I want to model one quarter of it. In fact I have 2 quarter > of circles with different radius and with the same center. I have a > boundary load on the perimeter(curve) side of the circle, axial symmetry on > the vertical side and symmetry (n.u=0, n is the unit normal vector and u is > the displacement) on the horizontal side. In fact my figure has three > vertices. It should be noted that the center of the quarter is fixed. In > addition, the symmetry axis coincides on the vertical axis. I do really > appreciate your kindness if you help me how I can define these geometry and > boundary conditions for this problem. > > Thanks, > Benhour > > On Wednesday, July 6, 2016 at 5:08:29 PM UTC-5, benhour....@gmail.com > wrote: >> >> Dear All, >> I want to define a new geometry (a quarter of a circle) and apply >> symmetry boundary condition on two sides of the quarter. It would be very >> kind of you if you help me for that. >> >> Best, >> Benhour >> > -- The deal.II project is located at http://www.dealii.org/ For mailing list/forum options, see https://groups.google.com/d/forum/dealii?hl=en --- You received this message because you are subscribed to the Google Groups "deal.II User Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to dealii+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
