Sebastian Humenda, le ven. 22 mai 2020 17:32:04 +0200, a ecrit: > Do you have a clue about the last lines: > > :2: invalid literaryTextTable > Finish read_configuration_file > Starting new document > Cannot open main table (null)
I don't know, trying to extract what the script does and run the command by hand would probably allow to debug more what liblouis is doing. > >> Last but not least, there's a double pipe, I suppose dash doesn't like > >> this. > > > >That would happen if TRANSLATE (between the two '|') is empty, but the > >texttobrf.in script should be already just dropping that part in that > >case, if it's not the case more detailed investigation is needed. > > I don't know, this is what cups displayed and I thought I might run the shown > command as-is so that I can investigate the failure. The script does print logs, but possibly the log print itself is bogus, so better make sure by adding more prints in the script. > >> > I'd need to try it out myself. I'd think that curves are much more > >> > precise > >> >> with ~50 DPI, > >> > > >> >Yes, but I'm unsure one can feel the difference that much. > >> > >> I have tried to plot a diagram that has two close lines and it shows as one > >> line in the printed version. > > > >Do you also mean that with the lower DPI you are not feeling the same? > > I don't have the comparison, sorry. I could test this at a later time. That could be useful yes, because using the 50DPI support of Index doesn't seem trivial at all :) > What I found is that most images are scaled down to A4 + a bit. You mean with the cups support for images? > That means that almost 90 % of the image is on the first page, a small > remainder flows to the second. Is this maybe a Index v3-v5 change? That rather looks like an error in the paper size setting. Samuel