Hello, I have some trouble getting X to start after installing woody on a DEC500a. It has a Matrox card and used to run Suse7.1 with X so obviously it can be done. I just need some help!
Is this related to the missing HALmodule? I have listed parts of the log file below. There are a lot of lines with "not loading .debug_line" in between the first part of the listing and the last part. I'll appreciate any help on this issue. Thanks, John Larsen lspci reports: 00:03.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 30) 00:04.0 IDE interface: CMD Technology Inc PCI0646 (rev 01) 00:07.0 Non-VGA unclassified device: Intel Corp. 82378IB [SIO ISA Bridge] (rev 43) 00:0b.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2064W [Millennium] (rev 01) 00:14.0 PCI bridge: Digital Equipment Corporation DECchip 21052 (rev 02) 01:09.0 SCSI storage controller: Adaptec AIC-7881U The first part of the log file is: This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [email protected] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.17 alpha [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Fri Mar 25 08:45:54 2005 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Generic Monitor" (**) | |-->Device "Generic Video Card" (**) |-->Input Device "Generic Keyboard" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc104" (**) XKB: model: "pc104" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Configured Mouse" (**) |-->Input Device "Generic Mouse" (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (++) using VT number 7 (WW) Cannot open APM (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a and the last part of the log file is: (II) Module xie: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension XIE (II) LoadModule: "mga" (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o Not loading .debug_line (II) Module mga: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.1 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.4 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o Not loading .debug_line (II) Module mouse: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.2 (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400 (II) Primary Device is: PCI 00:0b:0 (--) Assigning device section with no busID to primary device (--) Chipset mga2064w found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B] [2] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] [3] -1 0 0x0a000000 - 0x0bffffff (0x2000000) MX[B]E [4] -1 0 0x09000000 - 0x09003fff (0x4000) MX[B]E [5] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) [6] -1 0 0x09800000 - 0x09ffffff (0x800000) MX[B](B) [7] -1 0 0x09004000 - 0x09007fff (0x4000) MX[B](B) [8] -1 0 0xffffffff - 0xffffffff (0x1) IX[B] [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [10] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]E [11] -1 0 0x00008800 - 0x000088ff (0x100) IX[B]E [12] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]E (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B] [2] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] [3] -1 0 0x0a000000 - 0x0bffffff (0x2000000) MX[B]E [4] -1 0 0x09000000 - 0x09003fff (0x4000) MX[B]E [5] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) [6] -1 0 0x09800000 - 0x09ffffff (0x800000) MX[B](B) [7] -1 0 0x09004000 - 0x09007fff (0x4000) MX[B](B) [8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [11] -1 0 0xffffffff - 0xffffffff (0x1) IX[B] [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [13] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]E [14] -1 0 0x00008800 - 0x000088ff (0x100) IX[B]E [15] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]E [16] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [17] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a Not loading .debug_line Not loading .debug_line (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (**) MGA(0): Depth 16, (--) framebuffer bpp 16 (==) MGA(0): RGB weight 565 (**) MGA(0): Option "UseFBDev" "true" (II) MGA(0): Matrox HAL module not found - using builtin mode setup instead (--) MGA(0): Chipset: "mga2064w" (==) MGA(0): Using AGP 1x mode (**) MGA(0): Using framebuffer device (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a Not loading .debug_line (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.0.2 ABI class: XFree86 Video Driver, version 0.4 (II) UnloadModule: "mga" (II) UnloadModule: "fbdevhw" (II) Unloading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) UnloadModule: "vgahw" (II) Unloading /usr/X11R6/lib/modules/libvgahw.a (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
