TI means "target initiated". This can explain a non-host initiated negotiation.
martin On Mon, May 23, 2005 at 01:16:49PM +0200, mn wrote: > Hi, > > there is a TI sync negotiation jumper. I thought the host adapter would > initiate the negotiation. Maybe this feature only works on x86-Systems. > Correct me if I'm wrong. > > Regards, > Martin > > Martin Langer schrieb: > > >On Sun, May 22, 2005 at 08:56:40PM +0200, mn wrote: > > > > > >>I'm using the generic 2.6.10-Kernel on my AlphaStation 255/300. I boot > >>from a disk which is connected to a additional SCSI-Controller > >>(LSI8952U). When I look into dmesg it see the following lines: > >> > >>sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking > >>Vendor: IBM Model: DDYS-T09170N Rev: SA2A > >>Type: Direct-Access ANSI SCSI revision: 03 > >>sym1:0: wide asynchronous. > >> > >>Because the async mode is used I only get 14MB/s. How can I set it to > >>sync mode. I'm new to the Alpha and SCSI-world. > >> > >> > > > >Isn't there a jumper at the harddisk to set the sync mode on/off? > > > >martin > > > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
