I've included an lspci -v -v at the end in case anyone has any ideas
what it all means ...
...tom
I know that the DS20 often has PCI issues - anyone know of what may
cause issues with a 64bit PCI-X card on the machine?
Any recommended placements for such thing?
I have 3 64 bit cards in the machine, a VIA gig ethernet, a combo
scsi/ethernet card and the 3124-2 based eSata card ....
lspci -v -v:
0000:00:05.0 ISA bridge: Contaq Microsystems 82c693
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:05.1 IDE interface: Contaq Microsystems 82c693 (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 14
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at 9000 [size=16]
0000:00:05.2 IDE interface: Contaq Microsystems 82c693 (prog-if 00 [])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 15
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: Memory at 0a220000 (32-bit, non-prefetchable) [disabled]
[size=64K]
0000:00:05.3 USB Controller: Contaq Microsystems 82c693 (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 0a240000 (32-bit, non-prefetchable) [size=4K]
0000:00:07.0 VGA compatible controller: Texas Instruments TVP4020
[Permedia 2] (rev 01) (prog-if 00 [VGA])
Subsystem: Elsa AG GLoria Synergy
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (48000ns min, 48000ns max)
Interrupt: pin A routed to IRQ 31
Region 0: Memory at 0a200000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 09000000 (32-bit, non-prefetchable) [size=8M]
Region 2: Memory at 09800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 0a230000 [disabled] [size=64K]
0000:00:08.0 PCI bridge: Digital Equipment Corporation DECchip 21152
(rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=255
I/O behind bridge: 00008000-00008fff
Memory behind bridge: 0a000000-0a0fffff
Prefetchable memory behind bridge: 000000000a100000-000000000a1fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
0000:01:00.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875
(rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (4250ns min, 16000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 8000 [size=256]
Region 1: Memory at 0a002000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at 0a000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 0a140000 [disabled] [size=64K]
0000:01:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875
(rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (4250ns min, 16000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 8400 [size=256]
Region 1: Memory at 0a003000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at 0a001000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 0a150000 [disabled] [size=64K]
0000:01:02.0 Ethernet controller: Digital Equipment Corporation DECchip
21140 [FasterNet] (rev 22)
Subsystem: Digital Equipment Corporation Unknown device 500a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (5000ns min, 10000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at 8800 [size=128]
Region 1: Memory at 0a004000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 0a100000 [disabled] [size=256K]
0001:02:07.0 Mass storage controller: Silicon Image, Inc. SiI 3124 PCI-X
Serial ATA Controller (rev 02)
Subsystem: Silicon Image, Inc. SiI 3124 PCI-X Serial ATA Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 240, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at 209089000 (64-bit, non-prefetchable) [size=128]
Region 2: Memory at 209080000 (64-bit, non-prefetchable) [size=32K]
Region 4: I/O ports at 200008820 [size=16]
Expansion ROM at 209000000 [disabled] [size=512K]
Capabilities: [64] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=12
Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=12 DMCRS=128 RSCEM- 266MHz- 533MHz-
Capabilities: [54] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
0001:02:08.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE RAID
Controller (rev 50)
Subsystem: VIA Technologies, Inc. VT6421 IDE RAID Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 240
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 200008830 [size=16]
Region 1: I/O ports at 200008840 [size=16]
Region 2: I/O ports at 200008850 [size=16]
Region 3: I/O ports at 200008860 [size=16]
Region 4: I/O ports at 200008800 [size=32]
Region 5: I/O ports at 200008000 [size=256]
Capabilities: [e0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0001:02:09.0 Ethernet controller: VIA Technologies, Inc.
VT6120/VT6121/VT6122 Gigabit Ethernet Adapter (rev 01)
Subsystem: ZyXEL Communication Corporation Unknown device 3302
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (750ns min, 2000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 39
Region 0: I/O ports at 200008400 [size=256]
Region 1: Memory at 209088000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]