-----Original Message----- From: dann frazier <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Date: Tue, 27 May 2008 02:56:32 -0600 Subject: [stable] aboot - support recent kernels, fix build issues
etch's aboot doesn't permit booting recent 2.6 kernels. While backporting a fix for this issue, I ran into a couple of other build issues that prevent etch's aboot from being rebuilt properly. The proposed patch for this update and more detailed explanations are available here: http://lists.debian.org/debian-alpha/2008/05/msg00026.html This package is currently orphaned, but the previous maintainer did comment: http://lists.debian.org/debian-alpha/2008/05/msg00027.html Other than the testing I mentioned above, I've also had successful test reports from Bdale and Tim Cutts (on albeniz.d.o, iirc). This is obviously a requirement for alpha support in etchnhalf since 2.6.24 adds the ELF header incompatability. (Though releasing w/o alpha support is an option as well). -- dann frazier -- Hi Dann, The aboot in both lenny and sid work but it is just a matter of proper installation. http://lists.debian.org/debian-alpha/2008/05/msg00028.html Also, off topic here but the kernel builds in etch were at one point installing with symbolic links wrong from root but all symbolic links must be in "/boot/" on a typical etch install and /boot is a separate ext2 partition with a separate "/boot/etc/aboot.conf". /dev/sda3 5156060 633116 4522944 13% / tmpfs 60464 0 60464 0% /lib/init/rw udev 10240 104 10136 2% /dev tmpfs 60464 0 60464 0% /dev/shm /dev/sda2 73202 21337 47959 31% /boot /dev/sda7 26625460 781576 25843884 3% /home /dev/sda6 385824 8500 377324 3% /tmp /dev/sda4 2883640 384616 2352540 15% /var If you think my downgrading to your aboot deb packages is safe then I will test it but please reply to me. You may do so off list if you prefer. However, I can confirm that the aboot versions in testing and unstable do work fine. >From /boot/ ( remember it is separate ext2 ) Use : "swriteboot -f1 /dev/sda bootlx" special note : if you don't use the "-f1" switch it will fail. If you can use lenny ( testing ) or sid ( unstable ) aboot source you might consider it. They work well. I would recommend using lenny or sid aboot. By the way Dann, I see your patches for the 2.4 nubus ppc kernel so I know your work. Take care, Rodney Ross <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]