On Sun, 2004-10-10 at 17:56, Anders Peter Fugmann wrote: > # I2C adapter drivers > i2c-isa > # I2C chip drivers > w83627hf
This is what sensors-detect wrote in my /etc/modules (on an ASUS K8V): -- # Generated by sensors-detect on Mon Oct 11 13:16:19 2004 # I2C adapter drivers i2c-viapro i2c-isa # I2C chip drivers lm75 eeprom w83627hf -- This works fine and I haven't checked whether you really need all those or if just the i2c-isa and the w83627hf would do as well (eeprom isn't needed, its only output on a K8V is memory type and size). Anyways, here's the output from sensors: -- VCore: +1.10 V (min = +1.71 V, max = +1.89 V) +3.3V: +3.30 V (min = +3.14 V, max = +3.47 V) +5V: +5.00 V (min = +4.76 V, max = +5.24 V) +12V: +11.25 V (min = +10.82 V, max = +13.19 V) -12V: +0.30 V (min = -13.18 V, max = -10.80 V) -5V: +5.10 V (min = -5.25 V, max = -4.75 V) V5SB: +5.51 V (min = +4.76 V, max = +5.24 V) VBat: +0.02 V (min = +2.40 V, max = +3.60 V) fan1: 0 RPM (min = 37500 RPM, div = 2) fan2: 0 RPM (min = 337500 RPM, div = 2) temp1: +29°C (high = +4°C, hyst = +0°C) sensor = thermistor temp2: +30.0°C (high = +80°C, hyst = +75°C) sensor = thermistor alarms: Chassis intrusion detection ALARM beep_enable: Sound alarm disabled -- It's easy to see there are some completely bogus values in there. I don't know about the fan speed - the bios correctly reports it, but it doesn't show here (and I'm _really_ interested in seeing a fan that does 337500 rpm as a minimum...). Whatever, I found the two measured temperatures to be correct. temp1 is motherboard temp, temp2 is cpu temp. fan2 is cpu fan here, and I can throttle it to as low as 120, which stabilizes cpu temperature at about 32°C during normal typing work (so, idle most of the time) on a 3200+ using powernowd. Probably I could even switch it off, but air flow in my box isn't too good (and frankly, I don't care - on 120, the fan isn't audible anyway.) -- Sebastian Steinlechner
signature.asc
Description: This is a digitally signed message part