On Fri, 2004-11-19 at 01:59, Lennart Sorensen wrote: > On Thu, Nov 18, 2004 at 02:55:50PM +1100, Norval Watson wrote: > > Package: installation-reports > > > > INSTALL REPORT > > > > Debian-installer-version: > > http://debian-amd64.alioth.debian.org/install-images/sid-amd64-netinst.iso > > 26 Oct 2004 > > uname -a: > > Date: Nov 17 2004 > > Method: Downloaded sid-amd64-netinst.iso, burnt to CD, booted from CD > > > > Machine: Home assembled > > Processor: AMD Athlon 64 3000+ > > Memory: 2 x 512MB Geil PC3200 400MHz DDR Dual Channel, total 1024MB > > Root Device: hde Seagate ST380013AS SATA 80GB 7200rpm 8MB cache > > Root Size/partition table: Install got stuck at partitioniong: > > "No partitionable media found." > > Output of lspci and lspci -n: > > [EMAIL PROTECTED]:~$ lspci > > 0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 00e1 (rev > > a1) > > 0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00e0 (rev > > a2) > > 0000:00:01.1 SMBus: nVidia Corporation: Unknown device 00e4 (rev a1) > > 0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 00e7 > > (rev a1) > > 0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 00e7 > > (rev a1) > > 0000:00:02.2 USB Controller: nVidia Corporation: Unknown device 00e8 > > (rev a2) > > 0000:00:06.0 Multimedia audio controller: nVidia Corporation: Unknown > > device 00ea (rev a1) > > 0000:00:08.0 IDE interface: nVidia Corporation: Unknown device 00e5 (rev > > a2) > > 0000:00:0a.0 IDE interface: nVidia Corporation: Unknown device 00e3 (rev > > a2) > > 0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 00e2 (rev > > a2) > > 0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 00ed (rev > > a2) > > 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge > > 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge > > 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge > > 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge > > 0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 > > [GeForce4 MX 4000 AGP 8x] (rev a4) > > 0000:02:0b.0 Ethernet controller: Marvell Technology Group Ltd. Yukon > > Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13) > > 0000:02:0c.0 RAID bus controller: Integrated Technology Express, Inc. > > IT/ITE8212 Dual channel ATA RAID controller (PCI version seems to be > > IT8212, embedded seems (rev 11) > > 0000:02:0d.0 RAID bus controller: Silicon Image, Inc. (formerly CMD > > Technology Inc) SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev > > 01) > > 0000:02:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 > > IEEE-1394a-2000 Controller (PHY/Link) > > Which SATA controller did you use for the HD? This is some output from dmesg re hd: ide_setup: hdc=ide-scsi Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ide: late registration of driver. NFORCE3-250: IDE controller at PCI slot 00:08.0 NFORCE3-250: chipset revision 162 NFORCE3-250: not 100% native mode: will probe irqs later NFORCE3-250: 00:08.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA NFORCE3-250-SATA: IDE controller at PCI slot 00:0a.0 NFORCE3-250-SATA: chipset revision 162 NFORCE3-250-SATA: 00:0a.0 (rev a2) UDMA133 controller NFORCE3-250-SATA: 100% native mode on irq 11 ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio hdc: LITE-ON DVDRW SOHW-1213S, ATAPI CD/DVD-ROM drive hde: ST380013AS, ATA DISK drive blk: queue f8821408, I/O limit 4095Mb (mask 0xffffffff) ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0x9f0-0x9f7,0xbf2 on irq 11 hde: attached ide-disk driver. hde: Host Protected Area detected. current capacity is 156299375 sectors (80025 MB) native capacity is 156301488 sectors (80026 MB) hde: 156299375 sectors (80025 MB) w/8192KiB Cache, CHS=9729/255/63, UDMA(33) Partition check: /dev/ide/host2/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
> > Does the BIOS have any SATA/PATA settings? I will check when I reboot > > Len Sorensen > > Thanks Norv