Hi!
Does anybody has the Asus K8N mainboard? I like to configure my sensors.conf for this board. For now, the output is (default sensors.conf):
[EMAIL PROTECTED]:~$ sensors it8712-isa-0d00 Adapter: ISA adapter VCore 1: +1.50 V (min = +1.42 V, max = +1.57 V) ALARM VCore 2: +4.08 V (min = +2.40 V, max = +2.61 V) ALARM +3.3V: +6.43 V (min = +3.14 V, max = +3.46 V) ALARM +5V: +5.00 V (min = +4.76 V, max = +5.24 V) +12V: +11.78 V (min = +11.39 V, max = +12.61 V) -12V: +3.93 V (min = -12.63 V, max = -11.41 V) ALARM -5V: +4.03 V (min = -5.26 V, max = -4.77 V) ALARM Stdby: +6.85 V (min = +4.76 V, max = +5.24 V) ALARM VBat: +4.08 V fan1: 1506 RPM (min = 0 RPM, div = 128) fan3: 1147 RPM (min = 664 RPM, div = 8) M/B Temp: +47°C (low = +15°C, high = +40°C) sensor = thermistor CPU Temp: +35°C (low = +15°C, high = +45°C) sensor = thermistor vid: +1.52 V
I disabled fan2 because it is not used.
Has anybody a working sensors.conf for this mainboard?
I've not this board but an ASUS A8V so I cannot answer the previous questions.
How do the values change if I'm using Cool'n'Quiet? I'm running powernowd which changes the CPU frequency. Does this conflict with Cool'n'Quiet?
When using cool and quiet, the CPU frequecy and the VCORE voltage are changed according to data you can find in:
/sys/devices/system/cpu/cpu0/cpufreq
You have the running frequency as well as the max, and available frequencies.
You can use fancontrol to adjust the fan speed as a function of the CPU temperature. With the lm-sensors package are shipped pwmconfig to setup a configuration file for the fancontrol program which is also part of this package.
Debian Pure64, kernel 2.6.11-rc1 Vanilla.
Shade and sweet water!
Stephan
Regarsd
Jean-Luc
pgp4yhRt5KVYg.pgp
Description: PGP signature