Installation Report (resending) Hello Everybody-
I am sending email from a fresh sid install from pure64 using the 18 Feb 2005 sid-amd64-monolithic.iso installer. This install was my first to complete using any monolithic image. The base installation was halted twice when my DSL modem crashed and needed to be reset. Fortunately, I went back to the menu and the installer now resumed the install instead of starting over. The modem crashed at 14% and 17% and then the installer went to completion. The netcfg broadcast address was correct during the entire installation. There are never any crashes except when using D-I. The broadcast address must be unrelated to the crashes. Here is the ifconfig after the first crash of the DSL modem. eth0 Link encap:Ethernet HWaddr 00:11:2F:E0:3A:27 inet addr:192.168.2.64 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17727 errors:0 dropped:0 overruns:0 frame:0 TX packets:11146 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26370714 (25.1 MiB) TX bytes:798070 (779.3 KiB) Interrupt:17 Memory:fba00000-0 Here is the current ifconfig after finishing installation and login: eth0 Link encap:Ethernet HWaddr 00:11:2F:E0:3A:27 inet addr:192.168.2.64 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:44415 errors:0 dropped:0 overruns:0 frame:0 TX packets:28913 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:66897852 (63.7 MiB) TX bytes:2077083 (1.9 MiB) Interrupt:17 Memory:fba00000-0 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:560 (560.0 b) TX bytes:560 (560.0 b) The CDROM ejected and I rebooted using my custom kernel and the network is fine. This installation was made to my AMD64 ASUS A8V using VIA ide and sata controller. The sk98lin ethernet was installed automatically and no manual tweaks made. Again, this is my first installation to complete using the monolithic installer. [EMAIL PROTECTED] :-) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]