Hi, I've recently bought a hp dx5150, and I am trying to get it up and running the amd64 port.
d-i netinst CD with 2.6.12 from http://tinyplanet.ca/~lsorense/amd64 worked, except for 1. it booted in text mode, so I couldn't see anything Japanese, so had to install in English 2. did not autodetect sata_sil, I modprobe'd it manually in VT2. X seems a bit shakey, so I will probably need to explore a bit more. regards, junichi cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 31 model name : AMD Athlon(tm) 64 Processor 3500+ stepping : 0 cpu MHz : 2193.698 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow lahf_lm bogomips : 4308.99 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp lspci: 0000:00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f 0000:00:05.0 PCI bridge: ATI Technologies Inc: Unknown device 5a37 0000:00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller 0000:00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 0000:00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 0000:00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller 0000:00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 10) 0000:00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI 0000:00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge 0000:00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge 0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 01) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 0000:01:05.0 VGA compatible controller: ATI Technologies Inc RS480 [Radeon Xpress 200G Series] 0000:01:05.1 Display controller: ATI Technologies Inc: Unknown device 5854 0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 20) lspci-n: 0000:00:00.0 0600: 1002:5950 (rev 01) 0000:00:01.0 0604: 1002:5a3f 0000:00:05.0 0604: 1002:5a37 0000:00:12.0 0101: 1002:4379 0000:00:13.0 0c03: 1002:4374 0000:00:13.1 0c03: 1002:4375 0000:00:13.2 0c03: 1002:4373 0000:00:14.0 0c05: 1002:4372 (rev 10) 0000:00:14.1 0101: 1002:4376 0000:00:14.3 0601: 1002:4377 0000:00:14.4 0604: 1002:4371 0000:00:14.5 0401: 1002:4370 (rev 01) 0000:00:18.0 0600: 1022:1100 0000:00:18.1 0600: 1022:1101 0000:00:18.2 0600: 1022:1102 0000:00:18.3 0600: 1022:1103 0000:01:05.0 0300: 1002:5954 0000:01:05.1 0380: 1002:5854 0000:02:00.0 0200: 14e4:1677 (rev 20) meminfo: MemTotal: 961684 kB MemFree: 843340 kB Buffers: 22940 kB Cached: 63176 kB SwapCached: 0 kB Active: 61920 kB Inactive: 36120 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 961684 kB LowFree: 843340 kB SwapTotal: 2811332 kB SwapFree: 2811332 kB Dirty: 192 kB Writeback: 0 kB Mapped: 17048 kB Slab: 12120 kB CommitLimit: 3292172 kB Committed_AS: 26408 kB PageTables: 840 kB VmallocTotal: 34359738367 kB VmallocUsed: 1624 kB VmallocChunk: 34359736723 kB dmesg: Bootdata ok (command line is root=/dev/sda1 ro ) Linux version 2.6.12-1-amd64-generic ([EMAIL PROTECTED]) (gcc version 4.0.2 20050806 (prerelease) (Debian 4.0.1-4)) #1 Thu Aug 18 02:39:46 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bef0000 (usable) BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS) BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) ACPI: RSDP (v000 HP ) @ 0x00000000000f8600 ACPI: RSDT (v001 HP AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef3040 ACPI: FADT (v002 HP AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef30c0 ACPI: ASF! (v016 HP AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef64c0 ACPI: MCFG (v001 HP AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef6580 ACPI: MADT (v001 HP AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef6400 ACPI: DSDT (v001 HP AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 On node 0 totalpages: 245488 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 241392 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 3bf00000 (gap: 3bf00000:a4100000) Checking aperture... CPU 0: aperture @ 6426000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Built 1 zonelists Kernel command line: root=/dev/sda1 ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2193.698 MHz processor. time.c: Using PIT/TSC based timekeeping. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 961012k/981952k available (1857k kernel code, 20028k reserved, 1017k data, 148k init) Calibrating delay loop... 4308.99 BogoMIPS (lpj=2154496) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3500+ stepping 00 Using local APIC timer interrupts. Detected 12.464 MHz APIC timer. testing NMI watchdog ... OK. checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 Boot video device is 0000:01:05.0 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 3 of device 0000:00:00.0 PCI: Cannot allocate resource region 0 of device 0000:02:00.0 TC classifier action (bugs to netdev@vger.kernel.org cc [EMAIL PROTECTED]) PCI-DMA: Disabling IOMMU. pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:00' and the driver 'system' pnp: 00:00: ioport range 0x228-0x22f has been reserved pnp: 00:00: ioport range 0x40b-0x40b has been reserved pnp: 00:00: ioport range 0x4d6-0x4d6 has been reserved pnp: 00:00: ioport range 0xc00-0xc01 has been reserved pnp: 00:00: ioport range 0xc14-0xc14 has been reserved pnp: 00:00: ioport range 0xc50-0xc52 has been reserved pnp: 00:00: ioport range 0xc6c-0xc6d has been reserved pnp: 00:00: ioport range 0xc6f-0xc6f has been reserved pnp: match found with the PnP device '00:05' and the driver 'system' pnp: match found with the PnP device '00:09' and the driver 'system' pnp: match found with the PnP device '00:0a' and the driver 'system' IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1126164059.147:0): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 Initializing Cryptographic API PCI: 0000:00:05.0 has unsupported PM cap regs version (3) PCI: Setting latency timer of device 0000:00:05.0 to 64 pcie_portdrv_probe->Dev[5a37:1002] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Linux agpgart interface v0.101 (c) Dave Jones pnp: the driver 'i8042 kbd' has been registered pnp: the driver 'i8042 aux' has been registered pnp: the driver 'i8042 kbd' has been unregistered pnp: the driver 'i8042 aux' has been unregistered PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:07' and the driver 'serial' ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI wakeup devices: PCI0 USB0 USB1 USB2 AUDO P2P MAC UAR1 ACPI: (supports S0 S3 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 1464KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done. VFS: Mounted root (cramfs filesystem) readonly. input: AT Translated Set 2 keyboard on isa0060/serio0 Freeing unused kernel memory: 148k freed NET: Registered protocol family 1 SCSI subsystem initialized libata version 1.11 loaded. sata_sil version 0.9 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23 ata1: SATA max UDMA/100 cmd 0xFFFFC20000002080 ctl 0xFFFFC2000000208A bmdma 0xFFFFC20000002000 irq 23 ata2: SATA max UDMA/100 cmd 0xFFFFC200000020C0 ctl 0xFFFFC200000020CA bmdma 0xFFFFC20000002008 irq 23 ata1: dev 0 cfg 49:2f00 82:7869 83:7f09 84:4633 85:7869 86:3e01 87:4623 88:203f ata1: dev 0 ATA, max UDMA/100, 488397168 sectors: lba48 ata1: dev 0 configured for UDMA/100 scsi0 : sata_sil ata2: no device found (phy stat 00000000) scsi1 : sata_sil Vendor: ATA Model: Maxtor 7L250S0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back /dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 p6 > p3 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: sda1: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 580610 ext3_orphan_cleanup: deleting unreferenced inode 693578 ext3_orphan_cleanup: deleting unreferenced inode 306494 ext3_orphan_cleanup: deleting unreferenced inode 354877 ext3_orphan_cleanup: deleting unreferenced inode 354833 ext3_orphan_cleanup: deleting unreferenced inode 354839 ext3_orphan_cleanup: deleting unreferenced inode 354841 ext3_orphan_cleanup: deleting unreferenced inode 354844 ext3_orphan_cleanup: deleting unreferenced inode 354845 ext3_orphan_cleanup: deleting unreferenced inode 354847 ext3_orphan_cleanup: deleting unreferenced inode 354849 EXT3-fs: sda1: 11 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Adding 2811332k swap on /dev/sda5. Priority:-1 extents:1 EXT3 FS on sda1, internal journal Probing IDE interface ide0... hda: HL-DT-STDVDRRW GWA-4166B, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device scsi2 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: DVDRRW GWA-4166B Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 5 Real Time Clock Driver v1.12 Generic RTC Driver v1.07 kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. tg3.c:v3.31 (June 8, 2005) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: Tigon3 [partno(BCM95751) rev 4200 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:13:d3:4f:52:a2 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.0: PCI device 1002:4374 (ATI Technologies Inc) ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02e000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.1: PCI device 1002:4375 (ATI Technologies Inc) ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: PCI device 1002:4373 (ATI Technologies Inc) ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000 ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 3-0:1.0: USB hub found hub 3-0:1.0: 8 ports detected ATIIXP: IDE controller at PCI slot 0000:00:14.1 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ATIIXP: port 0x01f0 already claimed by ide0 ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide1... ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 input: PC Speaker Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 pnp: the driver 'parport_pc' has been registered pnp: match found with the PnP device '00:08' and the driver 'parport_pc' parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff8039a820(lo) IPv6 over IPv4 tunneling driver [drm] Initialized drm 1.0.0 20040925 Linux video capture interface: v1.00 eth0: no IPv6 routers present -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]