you shouldnt have to load any modules as long as they are configured as modules, all you need to do is create a /etc/mdadm/mdadm.conf
with the following (changed to your devices) DEVICE /dev/hd[bcd]1 ARRAY /dev/md0 UUID=3ab15009:10842ae2:c17e96db:d9376d90 And then modify /etc/default/mdadm and set AUTOSTART=true and hopefully if you have modified /etc/fstab to mount it correctly your system should mount home on start Thank you, Mark Adrian Coetser [EMAIL PROTECTED] http://www.tux-edo.co.za, http://www.thummb.com cel: +27 76 527 8789 tel: +27 11 805 2076 fax: +27 11 805 2330 > -----Original Message----- > From: Stephen Gran [mailto:[EMAIL PROTECTED] > Sent: 17 October 2005 08:01 PM > To: debian-amd64@lists.debian.org > Subject: Re: can't mount raid 5 after installation > > This one time, at band camp, Hamish Moffatt said: > > On Mon, Oct 17, 2005 at 01:58:52PM +0200, Goswin von Brederlow wrote: > > > kohzak <[EMAIL PROTECTED]> writes: > > > > > > > Hamish Moffatt a écrit : > > > > Ok, after reconfiguring mdadm i can mount my /home > > > > But after reboot, i still have the same problem. > > > > > > Reinstall the kernel-image so the initrd gets rebuild and includes the > > > raid modules and mdadm. > > > > But it won't since the root filesystem is not on raid. > > (At least, it doesn't need to, so I don't think the initrd will set up > > the md.) > > Put the names of the modules in /etc/mkinitrd/modules, one per line > (just like /etc/modules) > -- > ----------------------------------------------------------------- > | ,''`. Stephen Gran | > | : :' : [EMAIL PROTECTED] | > | `. `' Debian user, admin, and developer | > | `- http://www.debian.org | > -----------------------------------------------------------------