On Thu, Nov 03, 2005 at 11:58:22PM +0100, Gilles wrote: > Neither do I with that version (loading problem was with 1.0.7174). > It's just that the screen goes blank ("No signal"), but no error > (EE) is reported in the "Xorg.0.log" file. > > Although, there are some worrying warning (WW) lines: > > [...] > (II) NVIDIA(0): NVIDIA GPU detected as: GeForce FX 5200 > (--) NVIDIA(0): VideoBIOS: 04.34.20.13.00 > (--) NVIDIA(0): Interlaced video modes are supported on this GPU > (II) NVIDIA(0): Detected AGP rate: 8X > (--) NVIDIA(0): VideoRAM: 131072 kBytes > (II) NVIDIA(0): Connected display device(s): DFP-0, TV-0 > (WW) NVIDIA(0): Multiple displays connected, but only one display allowed; > (WW) NVIDIA(0): using first display
Ehm, the message about only using first display, and then the following about detected tv encoder makes me believe your card thinks you have a TV attached, and that the TV is the primary display and that the reason your screen goes blank is that X is only using the tv output with the current config. > (--) NVIDIA(0): Detected TV Encoder: NVIDIA > (--) NVIDIA(0): TV-0: maximum pixel clock: 650 MHz > [...] > (WW) NVIDIA(0): Not using mode "1280x1024" (not a valid TV mode) > [... many other warnings about "not a valid TV mode ... ] > (**) NVIDIA(0): Validated modes for display device TV-0: > (**) NVIDIA(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz > (**) NVIDIA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz > (**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz > [...] > (**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) > (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768 > (++) NVIDIA(0): DPI set to (100, 100) > [...] > > Maybe ths can ring a bell for someone knowledgeable? Len Sorensen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]