Am Samstag, 19. November 2005 07:36 schrieb Cameron Patrick: > Andrew Sharp wrote: > > what a PITA. I've got an ATI X300SE PCIe on my system, came right up > > with X when I installed etch, it works fast and furious, I didn't have > > to do anything except answer a couple of questions from debconf (or > > whatever) when it was installing. > > To get 3d working, it's a bit of work regardless of which you choose. > > For for fast and easy as pie 2d, ATI just works. > > FWIW this has also been my experience. With an X300 (and Radeon <= 9250) > you should have 3D acceleration too - thanks to the capital-F Free drivers > written by ATI and included as part of the kernel/Xfree/Xorg. The > low-end Radeons and Intel i8xx/i9xx are my graphics chipsets of choice > for this reason.
isn't x300 newer (advanced) than x200 ? what is your setup of your graphics in xorg.conf ? I've heard that the newer beta driver from alsa-project.org shall support the realtech alc880 chipset. btw. the answer I got from shuttle support was approximately translated : "Do not use such exotic chipsets like ati or nvidia on linux, use intel" ;-)) -- mit freundlichem Gruss -- regards Thomas Drillich Heugasse 4 / D-55116 Mainz / Germany fon +49 (0)6131 570 26 21 fax +49 (0)180 506 033 437 443 [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]