On Wed, Dec 21, 2005 at 01:48:27PM +0000, A.E.Lawrence wrote:
> Lennart Sorensen wrote:
>
> > Of course someone with the board could simply post the PCI ids for both
> > ports and it would then be much simpler to look it up.
>
> lspci -v on an Asus A8N-SLI deluxe:-
>
> 0000:00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
> Subsystem: ASUSTeK Computer Inc.: Unknown device 8141
> Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19
> Memory at da000000 (32-bit, non-prefetchable) [size=4K]
> I/O ports at b000 [size=8]
> Capabilities: [44] Power Management version 2
>
> 0000:05:0c.0 Ethernet controller: Marvell Technology Group Ltd. Gigabit
> Ethernet
> Controller (rev 13)
> Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit
> Ethernet Contro
> ller (Asus)
> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
> Memory at d9000000 (32-bit, non-prefetchable) [size=16K]
> I/O ports at ac00 [size=256]
> Expansion ROM at 88080000 [disabled] [size=128K]
> Capabilities: [48] Power Management version 2
> Capabilities: [50] Vital Product Data
So the A8N-SLI Deluxe has both an nvidia and a marvell ethernet port.
Maybe the other one isn't the Deluxe version then if it only has one
ethernet port.
Len Sorensen
After a couple of tries I managed to install etch using this installer http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso
During one of the attempts I noticed that et0 was autodetected as firewire and ethernet as et1 but normally ethernet came up as et0. Thanks for the tips.
-a