On Sat, Apr 08, 2006 at 07:12:19AM +0200, Francesco Pietra wrote: > Unable to get HP Deskjet 5740 printing economically through CUPS/HPLIP/usb. > The settings windows does not allow much and the printer uses a lot of ink. > Therefore, is any other printer branch fully supported on debian etch? > Printers are cheap while cartridges are expensive, so that i'll not hesitate > to through the printer away. I am even inclined to buy a scsi printer should > any be available in Europe. i am always uncomfortable with usb.
USB works fine, we've been running a HP LJ 2200 through USB for over two years without any problem whatsoever. > I can not rule out to miss some important settings because i use the specific > driver for openoffice and all editors, while both kpdf and adobe reader 7 do > not accept that (and nothing is being written on error log in this case) and > i have to set "custom printer" to get the printer working. Get the appropriate PPD for your printer from linuxprinting.org, put it in /usr/share/cups/model, restart cups and reconfigure the printer using the PPD you just uploaded. Doing so for a HP LJ 1320 enabled much more settings for it. Here's your PPD and hints&tips: http://www.linuxprinting.org/show_printer.cgi?recnum=HP-DeskJet_5740 Erik -- +-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 -- | Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
